table of contents example dissertation

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• Dissertation Table of Contents in Word | Instructions & Examples

Dissertation Table of Contents in Word | Instructions & Examples

Published on 15 May 2022 by Tegan George .

The table of contents is where you list the chapters and major sections of your thesis, dissertation, or research paper, alongside their page numbers. A clear and well-formatted table of contents is essential, as it demonstrates to your reader that a quality paper will follow.

The table of contents (TOC) should be placed between the abstract and the introduction. The maximum length should be two pages. Depending on the nature of your thesis, dissertation, or paper, there are a few formatting options you can choose from.

Download Word doc Download Google doc

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

What to include in your table of contents, what not to include in your table of contents, creating a table of contents in microsoft word, table of contents examples, updating a table of contents in microsoft word, other lists in your thesis, dissertation, or research paper, frequently asked questions about the table of contents.

Depending on the length of your document, you can choose between a single-level, subdivided, or multi-level table of contents.

• A single-level table of contents only includes ‘level 1’ headings, or chapters. This is the simplest option, but it may be too broad for a long document like a dissertation.
• A subdivided table of contents includes chapters as well as ‘level 2’ headings, or sections. These show your reader what each chapter contains.
• A multi-level table of contents also further divides sections into ‘level 3’ headings. This option can get messy quickly, so proceed with caution. Remember your table of contents should not be longer than 2 pages. A multi-level table is often a good choice for a shorter document like a research paper.

Examples of level 1 headings are Introduction, Literature Review, Methodology, and Bibliography. Subsections of each of these would be level 2 headings, further describing the contents of each chapter or large section. Any further subsections would be level 3.

In these introductory sections, less is often more. As you decide which sections to include, narrow it down to only the most essential.

Including appendices and tables

You should include all appendices in your table of contents. Whether or not you include tables and figures depends largely on how many there are in your document.

If there are more than three figures and tables, you might consider listing them on a separate page. Otherwise, you can include each one in the table of contents.

• Theses and dissertations often have a separate list of figures and tables.
• Research papers generally don’t have a separate list of figures and tables.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

All level 1 and level 2 headings should be included in your table of contents, with level 3 headings used very sparingly.

The following things should never be included in a table of contents:

• Your acknowledgements page
• Your abstract
• The table of contents itself

The acknowledgements and abstract always precede the table of contents, so there’s no need to include them. This goes for any sections that precede the table of contents.

To automatically insert a table of contents in Microsoft Word, be sure to first apply the correct heading styles throughout the document, as shown below.

• Choose which headings are heading 1 and which are heading 2 (or 3!
• For example, if all level 1 headings should be Times New Roman, 12-point font, and bold, add this formatting to the first level 1 heading.
• Highlight the level 1 heading.
• Right-click the style that says ‘Heading 1’.
• Select ‘Update Heading 1 to Match Selection’.
• Allocate the formatting for each heading throughout your document by highlighting the heading in question and clicking the style you wish to apply.

Once that’s all set, follow these steps:

• Add a title to your table of contents. Be sure to check if your citation style or university has guidelines for this.
• Place your cursor where you would like your table of contents to go.
• In the ‘References’ section at the top, locate the Table of Contents group.
• Here, you can select which levels of headings you would like to include. You can also make manual adjustments to each level by clicking the Modify button.
• When you are ready to insert the table of contents, click ‘OK’ and it will be automatically generated, as shown below.

The key features of a table of contents are:

• Clear headings and subheadings
• Corresponding page numbers

Check with your educational institution to see if they have any specific formatting or design requirements.

Write yourself a reminder to update your table of contents as one of your final tasks before submitting your dissertation or paper. It’s normal for your text to shift a bit as you input your final edits, and it’s crucial that your page numbers correspond correctly.

It’s easy to update your page numbers automatically in Microsoft Word. Simply right-click the table of contents and select ‘Update Field’. You can choose either to update page numbers only or to update all information in your table of contents.

In addition to a table of contents, you might also want to include a list of figures and tables, a list of abbreviations and a glossary in your thesis or dissertation. You can use the following guides to do so:

• List of figures and tables
• List of abbreviations

It is less common to include these lists in a research paper.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract   in the table of contents.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. (2022, May 15). Dissertation Table of Contents in Word | Instructions & Examples. Scribbr. Retrieved 24 June 2024, from https://www.scribbr.co.uk/thesis-dissertation/contents-page/

Is this article helpful?

Tegan George

Other students also liked, dissertation title page, how to write an abstract | steps & examples, thesis & dissertation acknowledgements | tips & examples.

• How it works

How to Create the Best Table of Contents for a Dissertation

Published by Owen Ingram at August 12th, 2021 , Revised On September 20, 2023

“A table of contents is an essential part of any article, book, proceedings, essay , and paper with plenty of information. It requires providing the reader’s guidance about the position of the content.”

When preparing a  dissertation , you may cram as much information into it as appropriate. The dissertation may be an extremely well-written one with a lot of valuable information to offer. Still, all that information could become perplexing if the reader cannot easily find the information.

The length of dissertations usually varies from a few pages to a few hundred pages, making it very difficult to find information that you may be after.

Instead of skimming through every page of the dissertation, there is a need for a guideline that directs the reader to the correct section of the dissertation and, more importantly, the correct page in the section.

Also read:   The List of Figures and Tables in the Dissertation .

What is the Table of Contents in the Dissertation?

The table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents.

Depending on the detail level in a table of contents, the most useful headings are listed to provide the reader concerning which page the said information may be found.

The table of contents is essentially a list found at the beginning of a  dissertation , which contains names of the chapters, section titles and/or very brief descriptions, and page numbers indicated for each.

This allows the reader to look at the table of contents to locate the information needed from the dissertation. Having an effective table of contents is key to providing a seamless reading experience to the reader.

Here in this article, we will uncover every piece of information you need to know to write the dissertation’s abstract.

This article helps the readers on how to create the best table of contents for the dissertation. An important thing to note is that this guide discusses creating a table of contents in Microsoft Word.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with dissertations across a variety of disciplines. Guaranteeing 100% satisfaction!

Styles for Dissertation Table of Contents

Making an effective table of contents starts with identifying headings and designating styles to those headings.

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents .

Each heading style already has predefined sizes, fonts, colours, spacing, etc. but can be changed as per the user’s requirements. This also helps once all headings have been created and you intend to change the style of a certain type of heading.

All that is needed to change the style of a type of heading is automatically reflected on all headings that use the style.

Below is how the styles menu looks like;

To allocate a style to a heading, first select a heading and then click on one of the styles in the ‘Styles’ menu. Doing so converts the selected heading to the style that is selected in the Styles menu.

You can style a similar heading level in the same style by selecting each heading and then clicking on the style in the Style menu.

It is important to note that it greatly helps and saves time if you allocate styles systematically, i.e., you allocate the style as you write.

The styles are not limited to headings only but can be used for paragraphs and by selecting the whole paragraph and applying a style to it.

Changing Appearance of Pre-Defined Styles

To change the appearance of a style to one that suits you,

• You would need to right-click on one of the styles to open a drop-down menu.

• Select ‘Modify’ from the menu. This would display a window with various formatting and appearance options. You can select the most appropriate ones and click ‘OK.’ The change that you made to the style reflects on all headings or paragraphs that use this style.

Further changes can be made to headings, but using styles is an important step for creating the table of contents for the thesis. Once this step is completed, you can continue to create a thesis table of contents.

Also Read:  What is Appendix in Dissertation?

Things to Consider when Making APA Style Table of Contents

• The pages before the body of the dissertation, known as the ‘Prefatory Pages,’ should not have page numbers on them but should be numbered in the Roman Numerals instead as (i, ii, iii…).
• Table of Contents and the Abstract pages are not to contain any numbers.
• The remaining pages would carry the standard page numbers (1,2,3…).
• The section titles and page numbers in the dissertation table of contents should have dotted lines between them.
• All the Prefatory pages, Sections, Chapter Titles, Headings, Sub Headings, Reference Sections, and Appendices should be listed in the contents’ thesis table. If there are a limited number of Tables or Figures, they may be listed in the dissertation’s table contents.
• If there are many figures, tables, symbols, or abbreviations, a List of Tables, List of Figures , List of Symbols, and List of Abbreviations should be made for easy navigation. These lists, however, should not be listed in the thesis table of contents.
• The thesis/dissertation must be divided into sections even if it is not divided into chapters, with all sections being listed in the table of contents for the thesis.

Generating Dissertation Table of Contents

First, to generate the Table of Contents, start by entering a blank page after the pages you need the table of contents to follow.

• To do so, click on the bottom of the page you want before the Table of Contents.
• Open the ‘Insert’ tab and select ‘Page Break’.
• This will create a page between the top and bottom sections of the Table of Contents area.

By the time you reach this section, you would have given each heading or sub-heading a dedicated style, distinguishing between different types of headings. Microsoft Word can automatically generate a Table of Contents, but the document, particularly the headings, needs to be formatted according to styles for this feature to work. You can assign different headings levels, different styles for Microsoft Word to recognize the level of heading.

How to Insert Table of Contents

• Place the cursor where you want to place the Table of Contents on the page you added earlier.
• On the ‘References’ tab, open the Table of Contents group. This would open a list of different Table of Contents designs and a  table of contents sample.

• You can select an option from the available Table of Contents or make a Custom Table of Contents. Although the available Table of Contents samples is appropriate, you may use a custom table of contents if it is more suitable to your needs. This allows you to modify different formatting options for the Table of Contents to satisfy your own

Updating the Table of Contents

As you proceed with editing your dissertation, the changes cause the page numbers and headings to vary. Often, people fail to incorporate those changes into the Table of Contents, which then effectively serves as an incorrect table and causes confusion.

It is thus important to update the changes into the table of contents as the final step once you have made all the necessary changes in the dissertation and are ready to print it.

These changes may alter the length of the  thesis table of contents , which may also cause the dissertation’s formatting to be altered a little, so it is best to reformat it after updating the table of contents.

To update the table of contents,

• Select ‘Update Table’ in the References tab.
• This would open a dialogue box. Select ‘Update Entire Table’ to ensure that all changes are reflected in the contents table and not just the page numbers. This would display all changes and additions you have made to the document (Anon., 2017).

Using this guide, you should understand how to create the best table of contents for the dissertation. The use of a Table of Contents, while being important for most written work, is even more critical for dissertations, especially when the proper methodology of creating the table of contents is followed.

This includes the guidelines that must be considered to correctly format the table of contents so that it may be shaped so that it follows the norms and is effective at helping the reader navigate through the content of the dissertation.

The use of Microsoft Word’s Table of Contents generation feature has greatly helped people worldwide create, edit, and update the table of contents of their dissertations with ease.

Here in this article, we will uncover every piece of information you need to know  how to write the dissertation’s abstract .

Are you in need of help with dissertation writing? At ResearchProspect, we have hundreds of Master’s and PhD qualified writers for all academic subjects, so you can get help with any aspect of your dissertation project. You can place your order for a proposal ,  full dissertation paper , or  individual chapters .

Is it essential to add a table of content to the dissertation?

Yes, it is important to add a table of content in a dissertation .

How to make an effective table of contents for the dissertation?

Using heading styles to format your headings can save a lot of time by automatically converting their formatting to the defined style and serves as a tool to identify the heading and its level, used later when creating a thesis table of contents.

How do I update the table of contents?

You may also like.

Learn how to write a good declaration page for your thesis with the help of our step-by-step comprehensive guide. Read now.

Anyone who supports you in your research should be acknowledged in dissertation acknowledgments. Learn more on how to write dissertation acknowledgements.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page

Table of Contents

• List of Figures (etc.)
• Acknowledgements
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

The Table of Contents should follow these guidelines:

• ​All sections of the manuscript are listed in the Table of Contents except the Title Page, the Copyright Page, the Dedication Page, and the Table of Contents.
• You may list subsections within chapters
• Creative works are not exempt from the requirement to include a Table of Contents

Table of Contents Example

Here is an example of a Table of Contents page from the Template. Please note that your table of contents may be longer than one page.

• << Previous: Dedication Page
• Next: List of Figures (etc.) >>
• Last Updated: May 31, 2024 9:34 AM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Want to Get your Dissertation Accepted?

Discover how we've helped doctoral students complete their dissertations and advance their academic careers!

Join 200+ Graduated Students

Get Your Dissertation Accepted On Your Next Submission

Get customized coaching for:.

• Crafting your proposal,
• Collecting and analyzing your data, or
• Preparing your defense.

Trapped in dissertation revisions?

How to create a table of contents for a dissertation (apa), published by steve tippins on june 20, 2022 june 20, 2022.

Last Updated on: 7th June 2024, 05:08 am

APA Dissertation Table of Contents Format Guidelines

• The table of contents should be double spaced with one-inch margins on all sides. 
• It should be written in the same font and size as the rest of your dissertation.  
• At the top of the page, write Table of Contents , centered and in bold.
• Although in the body of the paper you can use up to five levels of headings, up to three levels are usually provided in the Table of Contents. Including lower-level headings is optional. 
• Indent each subheading five spaces. 
• Write all text in title case. In title case, the first letter of major words is capitalized.
• Provide the page number where the main headings and subheadings begin, and provide dotted lines between the heading and the page number.
• Page numbers for the Dedication, Acknowledgements, and Preface should be in lower case Roman Numbers (i, v, x, l, c, d and m.). The page numbers for the rest of the text should be in Arabic numerals (1,2, 3, 4, etc.).

How to Write a Dissertation Table of Contents in APA Using Microsoft Word

Step 1. Instead of manually trying to write and format the table of contents, you can create a generated one using Microsoft Word. To do this, first go to the Home tab. This is where you will choose the styles for the table of contents. 

Step 2. The top-level headings will be your chapter titles, so on the right side of the tab, apply the Heading 1 style. 

Step 3. The second-level headings will be your subheadings, so apply the Heading 2 style. This will place your subheadings underneath your main headings.

Step 4. You will now produce page links to your document. In the top ribbon, click on the References tab and select Table of Contents . 

Step 5. If the style does not indicate APA, such as the one below, use the drop down arrow to select APA. 

Step 6. Next, choose the number of levels that you want. In this case, you want to be able to have up to three levels, so choose Automatic Table 2 , which has the appropriate heading for a dissertation. 

Step 7. Click ok , and you are all set. Microsoft word will automatically generate your dissertation’s table of contents as you write it.

List of Tables and Figures

Your list of tables and figures will be written at the end of the list of information in the body of your paper. You will create these lists the same way that you created the main table of contents. 

However, the headings will be different. 

Instead of the heading “Table of Contents,” the headings will be “List of Tables” and “List of Figures.” (An example is provided in the table of contents example below.)

Sample of a Dissertation Table of Contents

In the example below, there are three level headings. The list of tables and figures are provided at the bottom of the other contents. The sections in your table of contents may be different depending on your college’s requirements. 

Updating the Dissertation Table of Contents

As you continue working on your dissertation, you will need to update the page numbers because they may change. 

To update the page numbers, right-click on the table of contents in your document and select the Update field . Then, the Update Table of Contents box will appear. 

You can choose to Update page numbers only or all the information in the table of contents by clicking on Update entire table . 

Note: For more information, refer to the APA Manual 7 th edition , sections 2.2-2.27.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Related Posts

Dissertation

Dissertation memes.

Sometimes you can’t dissertate anymore and you just need to meme. Don’t worry, I’ve got you. Here are some of my favorite dissertation memes that I’ve seen lately. My Favorite Dissertation Memes For when you Read more…

Surviving Post Dissertation Stress Disorder

The process of earning a doctorate can be long and stressful – and for some people, it can even be traumatic. This may be hard for those who haven’t been through a doctoral program to Read more…

PhD by Publication

PhD by publication, also known as “PhD by portfolio” or “PhD by published works,” is a relatively new route to completing your dissertation requirements for your doctoral degree. In the traditional dissertation route, you have Read more…

• Privacy Policy

Home » Table of Contents – Types, Formats, Examples

Table of Contents – Types, Formats, Examples

Table of Contents

Definition:

Table of contents (TOC) is a list of the headings or sections in a document or book, arranged in the order in which they appear. It serves as a roadmap or guide to the contents of the document, allowing readers to quickly find specific information they are looking for.

A typical table of contents includes chapter titles, section headings, subheadings, and their corresponding page numbers.

The table of contents is usually located at the beginning of the document or book, after the title page and any front matter, such as a preface or introduction.

Table of Contents in Research

In Research, A Table of Contents (TOC) is a structured list of the main sections or chapters of a research paper , Thesis and Dissertation . It provides readers with an overview of the organization and structure of the document, allowing them to quickly locate specific information and navigate through the document.

Importance of Table of Contents

Here are some reasons why a TOC is important:

• Navigation : It serves as a roadmap that helps readers navigate the document easily. By providing a clear and concise overview of the contents, readers can quickly locate the section they need to read without having to search through the entire document.
• Organization : A well-structured TOC reflects the organization of the document. It helps to organize the content logically and categorize it into easily digestible chunks, which makes it easier for readers to understand and follow.
• Clarity : It can help to clarify the document’s purpose, scope, and structure. It provides an overview of the document’s main topics and subtopics, which can help readers to understand the content’s overall message.
• Efficiency : This can save readers time and effort by allowing them to skip to the section they need to read, rather than having to go through the entire document.
• Professionalism : Including a Table of Contents in a document shows that the author has taken the time and effort to organize the content properly. It adds a level of professionalism and credibility to the document.

Types of Table of Contents

There are different types of table of contents depending on the purpose and structure of the document. Here are some examples:

Simple Table of Contents

This is a basic table of contents that lists the major sections or chapters of a document along with their corresponding page numbers.

Example: Table of Contents

I. Introduction …………………………………………. 1

II. Literature Review ………………………………… 3

III. Methodology ……………………………………… 6

IV. Results …………………………………………….. 9

V. Discussion …………………………………………. 12

VI. Conclusion ……………………………………….. 15

Expanded Table of Contents

This type of table of contents provides more detailed information about the contents of each section or chapter, including subsections and subheadings.

A. Background …………………………………….. 1

B. Problem Statement ………………………….. 2

C. Research Questions ……………………….. 3

II. Literature Review ………………………………… 5

A. Theoretical Framework …………………… 5

B. Previous Research ………………………….. 6

C. Gaps and Limitations ……………………… 8 I

II. Methodology ……………………………………… 11

A. Research Design ……………………………. 11

B. Data Collection …………………………….. 12

C. Data Analysis ……………………………….. 13

IV. Results …………………………………………….. 15

A. Descriptive Statistics ……………………… 15

B. Hypothesis Testing …………………………. 17

V. Discussion …………………………………………. 20

A. Interpretation of Findings ……………… 20

B. Implications for Practice ………………… 22

VI. Conclusion ……………………………………….. 25

A. Summary of Findings ……………………… 25

B. Contributions and Recommendations ….. 27

Graphic Table of Contents

This type of table of contents uses visual aids, such as icons or images, to represent the different sections or chapters of a document.

I. Introduction …………………………………………. [image of a light bulb]

II. Literature Review ………………………………… [image of a book]

III. Methodology ……………………………………… [image of a microscope]

IV. Results …………………………………………….. [image of a graph]

V. Discussion …………………………………………. [image of a conversation bubble]

Alphabetical Table of Contents

This type of table of contents lists the different topics or keywords in alphabetical order, along with their corresponding page numbers.

A. Abstract ……………………………………………… 1

B. Background …………………………………………. 3

C. Conclusion …………………………………………. 10

D. Data Analysis …………………………………….. 8

E. Ethics ……………………………………………….. 6

F. Findings ……………………………………………… 7

G. Introduction ……………………………………….. 1

H. Hypothesis ………………………………………….. 5

I. Literature Review ………………………………… 2

J. Methodology ……………………………………… 4

K. Limitations …………………………………………. 9

L. Results ………………………………………………… 7

M. Discussion …………………………………………. 10

Hierarchical Table of Contents

This type of table of contents displays the different levels of headings and subheadings in a hierarchical order, indicating the relative importance and relationship between the different sections.

    A. Background …………………………………….. 2

      B. Purpose of the Study ……………………….. 3

      A. Theoretical Framework …………………… 5

             1. Concept A ……………………………….. 6

                    a. Definition ………………………….. 6

                     b. Example ……………………………. 7

              2. Concept B ……………………………….. 8

       B. Previous Research ………………………….. 9

III. Methodology ……………………………………… 12

       A. Research Design ……………………………. 12

             1. Sample ……………………………………. 13

               2. Procedure ………………………………. 14

       B. Data Collection …………………………….. 15

            1. Instrumentation ……………………….. 16

            2. Validity and Reliability ………………. 17

       C. Data Analysis ……………………………….. 18

          1. Descriptive Statistics …………………… 19

           2. Inferential Statistics ………………….. 20

IV. Result s …………………………………………….. 22

    A. Overview of Findings ……………………… 22

B. Hypothesis Testing …………………………. 23

V. Discussion …………………………………………. 26

A. Interpretation of Findings ………………… 26

B. Implications for Practice ………………… 28

VI. Conclusion ……………………………………….. 31

A. Summary of Findings ……………………… 31

B. Contributions and Recommendations ….. 33

Table of Contents Format

Here’s an example format for a Table of Contents:

I. Introduction

C. Methodology

II. Background

A. Historical Context

B. Literature Review

III. Methodology

A. Research Design

B. Data Collection

C. Data Analysis

IV. Results

A. Descriptive Statistics

B. Inferential Statistics

C. Qualitative Findings

V. Discussion

A. Interpretation of Results

B. Implications for Practice

C. Limitations and Future Research

VI. Conclusion

A. Summary of Findings

B. Contributions to the Field

C. Final Remarks

VII. References

VIII. Appendices

Note : This is just an example format and can vary depending on the type of document or research paper you are writing.

When to use Table of Contents

A TOC can be particularly useful in the following cases:

• Lengthy documents : If the document is lengthy, with several sections and subsections, a Table of contents can help readers quickly navigate the document and find the relevant information.
• Complex documents: If the document is complex, with multiple topics or themes, a TOC can help readers understand the relationships between the different sections and how they are connected.
• Technical documents: If the document is technical, with a lot of jargon or specialized terminology, This can help readers understand the organization of the document and locate the information they need.
• Legal documents: If the document is a legal document, such as a contract or a legal brief, It helps readers quickly locate specific sections or provisions.

How to Make a Table of Contents

Here are the steps to create a table of contents:

• Organize your document: Before you start making a table of contents, organize your document into sections and subsections. Each section should have a clear and descriptive heading that summarizes the content.
• Add heading styles : Use the heading styles in your word processor to format the headings in your document. The heading styles are usually named Heading 1, Heading 2, Heading 3, and so on. Apply the appropriate heading style to each section heading in your document.
• Insert a table of contents: Once you’ve added headings to your document, you can insert a table of contents. In Microsoft Word, go to the References tab, click on Table of Contents, and choose a style from the list. The table of contents will be inserted into your document.
• Update the table of contents: If you make changes to your document, such as adding or deleting sections, you’ll need to update the table of contents. In Microsoft Word, right-click on the table of contents and select Update Field. Choose whether you want to update the page numbers or the entire table, and click OK.

Purpose of Table of Contents

A table of contents (TOC) serves several purposes, including:

• Marketing : It can be used as a marketing tool to entice readers to read a book or document. By highlighting the most interesting or compelling sections, a TOC can give readers a preview of what’s to come and encourage them to dive deeper into the content.
• Accessibility : A TOC can make a document or book more accessible to people with disabilities, such as those who use screen readers or other assistive technologies. By providing a clear and organized overview of the content, a TOC can help these readers navigate the material more easily.
• Collaboration : This can be used as a collaboration tool to help multiple authors or editors work together on a document or book. By providing a shared framework for organizing the content, a TOC can help ensure that everyone is on the same page and working towards the same goals.
• Reference : It can serve as a reference tool for readers who need to revisit specific sections of a document or book. By providing a clear overview of the content and organization, a TOC can help readers quickly locate the information they need, even if they don’t remember exactly where it was located.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Thesis Statement – Examples, Writing Guide

Appendices – Writing Guide, Types and Examples

Data Interpretation – Process, Methods and...

How to Publish a Research Paper – Step by Step...

Research Findings – Types Examples and Writing...

Research Methodology – Types, Examples and...

• Mardigian Library
• Subject Guides

Formatting Your Thesis or Dissertation with Microsoft Word

• Table of Contents
• Introduction
• Copyright Page
• Dedication, Acknowledgements, & Preface
• Headings and Subheadings
• Citations and Bibliography
• Page Numbers
• Tables and Figures
• Rotated (Landscape) Pages
• Lists of Tables and Figures
• List of Abbreviations
• Some Things to Watch For
• PDF with Embedded Fonts

Table of contents

If you created your headings and subheadings with styles, and numbered your pages as demonstrated in the Page Numbers tutorial, Microsoft Word can be used to automatically generate a table of contents. Automatic generation of the table of contents has 2 advantages:

• You don't have to manually type the table of contents. Since the entries in the Table of Content must match exactly the headings, subheadings, and page numbers in the thesis, manually creating a table of contents can lead to unintended errors.
• You don't have to go back and edit the table of contents if something moves from one page to another. A couple of clicks and Word will automatically update the table of contents for you.

Below is a tutorial demonstrating how to create the table of contents.

Note: You should create the table of contents last to avoid needing to update the table of contents too often.

• << Previous: Front Matter Lists
• Next: Lists of Tables and Figures >>
• Last Updated: Mar 21, 2024 2:35 PM
• URL: https://guides.umd.umich.edu/Word_for_Theses

Call us at 313-593-5559

Chat with us

Text us: 313-486-5399

Email us your question

• 4901 Evergreen Road Dearborn, MI 48128, USA
• Phone: 313-593-5000
• Maps & Directions
• M+Google Mail
• Emergency Information
• UM-Dearborn Connect
• Wolverine Access

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

• List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

• Non-Traditional Formats
• Font Type and Size
• Spacing and Indentation
• Tables, Figures, and Illustrations
• Formatting Previously Published Work
• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

• Dedication, Acknowledgements, and Preface (each optional)
• Table of Contents, with page numbers
• List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
• List of Abbreviations (if applicable)
• List of Symbols (if applicable)
• Introduction, if any
• Main body, with consistent subheadings as appropriate
• Appendices (if applicable)
• Endnotes (if applicable)
• References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

• The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
• Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

• When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
• List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
• If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
• The words “Chapel Hill” must be centered 1″ below the statement.
• One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
• Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
• No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

• Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
• One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
• One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
• Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
• Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
• Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

• Do not place a heading on the dedication page.
• The text of short dedications must be centered and begin 2″ from the top of the page.
• Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
• The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
• Subsequent pages of text return to the 1″ top margin.
• The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

• Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
• Include one double-spaced line between the heading and the first entry.
• The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
• If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
• Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
• Include one double-spaced line between each entry.
• Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
• The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

• Include the heading(s) in all capital letters, centered 1″ below the top of the page.
• Each entry must include a number, title, and page number.
• Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
• Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
• All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

• Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
• Arrange your abbreviations alphabetically.
• Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, single-space between the two lines.
• The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

Accessibility Report

[Enter personal and organization information through the Preferences > Identity dialog.]

The checker found no problems in this document.

• Needs manual check: 2
• Passed manually: 0
• Failed manually: 0

Detailed Report

Graduate School

• Make a Gift

Organizing and Formatting Your Thesis and Dissertation

Learn about overall organization of your thesis or dissertation. Then, find details for formatting your preliminaries, text, and supplementaries.

Overall Organization

A typical thesis consists of three main parts – preliminaries, text, and supplementaries. Each part is to be organized as explained below and in the order indicated below:

1. Preliminaries:

• Title page (required)
• Copyright page (required)
• Abstract (required) only one abstract allowed
• Acknowledgments (optional) located in the Preliminary Section only
• Preface (optional)
• Autobiography (optional)
• Dedication (optional)
• Table of Contents (required)
• List of Tables (optional)
• List of Figures (optional)
• List of Plates (optional)
• List of Symbols (optional)
• List of Keywords (optional)
• Other Preliminaries (optional) such as Definition of Terms

3. Supplementaries:

• References or bibliography (optional)
• Appendices (optional)
• Glossary (optional)
• List of Abbreviations (optional)

Preliminaries

These are the general requirements for all preliminary pages.

• Preliminary pages are numbered with lower case Roman numerals.
• Page numbers are ½” from the bottom of the page and centered.
• The copyright page is included in the manuscript immediately after the title page and is not assigned a page number nor counted.
• The abstract page is numbered with the Roman numeral “ii”.
• The remaining preliminary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all preliminary pages must be centered in all capital letters 1” from the top of the page.
• Do not bold the headings of the preliminary pages.

A sample Thesis title page pdf is available here ,  and a sample of a Dissertation title page pdf is available here.

Refer to the sample page as you read through the format requirements for the title page.

• Do not use bold.
• Center all text except the advisor and committee information.

The heading “ Thesis ” or “ Dissertation ” is in all capital letters, centered one inch from the top of the page.

• Your title must be in all capital letters, double spaced and centered.
• Your title on the title page must match the title on your GS30 – Thesis/Dissertation Submission Form

Submitted by block

Divide this section exactly as shown on the sample page. One blank line must separate each line of text.

• Submitted by
• School of Advanced Materials Discovery 
• School of Biomedical Engineering
• Graduate Degree Program in Cell and Molecular Biology
• Graduate Degree Program in Ecology

If your department name begins with “School of”, list as:

• School of Education
• School of Music, Theatre and Dance
• School of Social Work

If you have questions about the correct name of your department or degree, consult your department. Areas of Study or specializations within a program are not listed on the Title Page.

Degree and Graduating Term block

• In partial fulfillment of the requirements
• For the Degree of
• Colorado State University
• Fort Collins, Colorado (do not abbreviate Colorado)

Committee block

• Master’s students will use the heading Master’s Committee:
• Doctoral students will use the heading Doctoral Committee:
• The Master’s Committee and Doctoral Committee headings begin at the left margin.
• One blank line separates the committee heading and the advisor section.
• One blank line separates the advisor and committee section.
• Advisor and committee member names are indented approximately half an inch from the left margin.
• Titles before or after the names of your advisor and your members are not permitted (Examples – Dr., Professor, Ph.D.).

Copyright Page

• A sample copyright page pdf is available here.
• A copyright page is required.
• A copyright page is included in the manuscript immediately after the title page.
• This page is not assigned a number nor counted.
• Center text vertically and horizontally.
• A sample abstract page pdf is available here – refer to the sample page as you read through the format requirements for the abstract.
• Only one abstract is permitted.
• The heading “ Abstract ” is in all capital letters, centered one inch from the top of the page.
• Three blank lines (single-spaced) must be between the “ Abstract ” heading and your title.
• Your title must be in all capital letters and centered.
• The title must match the title on your Title Page and the GS30 – Thesis/Dissertation Submission Form
• Three blank lines (single-spaced) must be between the title and your text.
• The text of your abstract must be double-spaced.
• The first page of the abstract is numbered with a small Roman numeral ii.

Table of Contents

• A sample Table of Contents page pdf is available.
• The heading “ Table of Contents ” is in all capital letters centered one inch from the top of the page.
• Three blank lines (single-spaced) follow the heading.
• List all parts of the document (except the title page) and the page numbers on which each part begins.
• The titles of all parts are worded exactly as they appear in the document.
• Titles and headings and the page numbers on which they begin are separated by a row of dot leaders.
• Major headings are aligned flush with the left margin.
• Page numbers are aligned flush with the right margin.

The text of a thesis features an introduction and several chapters, sections and subsections. Text may also include parenthetical references, footnotes, or references to the bibliography or endnotes.

Any references to journal publications, authors, contributions, etc. on your chapter pages or major heading pages should be listed as a footnote .

• The entire document is 8.5” x 11” (letter) size.
• Pages may be in landscape position for figures and tables that do not fit in “portrait” position.
• Choose one type style (font) and font size and use it throughout the text of your thesis. Examples: Times New Roman and Arial.
• Font sizes should be between 10 point and 12 point.
• Font color must be black. 
• Hyperlinked text must be in blue. If you hyperlink more than one line of text, such as the entire table of contents, leave the text black. 
• Margins are one inch on all sides (top, bottom, left, and right).
• Always continue the text to the bottom margin except at the end of a chapter.

• Please see preliminary page requirements .
• Body and references are numbered with Arabic numerals beginning with the first page of text (numbered 1).
• Page numbers must be centered ½” from the bottom of the page.

Major Headings

• A sample page pdf for major headings and subheadings is available here.
• Use consistent style for major headings.
• Three blank lines (single-spaced) need to be between the major heading and your text.
• Each chapter is started on a new page.
• The References or Bibliography heading is a major heading and the formatting needs to match chapter headings.

Subheadings

• A sample page pdf for major headings and subheadings is available here .
• Style for subheadings is optional but the style should be consistent throughout.
• Subheadings within a chapter (or section) do not begin on a new page unless the preceding page is filled. Continue the text to the bottom of the page unless at the end of a chapter.
• Subheadings at the bottom of a page require two lines of text following the heading and at least two lines of text on the next page.

Running Head

Do not insert a running head.

When dividing paragraphs, at least two lines of text should appear at the bottom of the page and at least two lines of text on the next page.

Hyphenation

The last word on a page may not be divided. No more than three lines in succession may end with hyphens. Divide words as indicated in a standard dictionary.

• The text of the thesis is double-spaced.
• Bibliography or list of reference entries and data within large tables may be single-spaced. Footnotes should be single spaced.
• Footnotes and bibliography or list of reference entries are separated by double-spacing.
• Quoted material of more than three lines is indented and single-spaced. Quoted material that is three lines or fewer may be single-spaced for emphasis.

Poems should be double-spaced with triple-spacing between stanzas. Stanzas may be centered if lines are short.

• Consult a style manual approved by your department for samples of footnotes.
• Footnotes are numbered consecutively throughout the entire thesis.
• Footnotes appear at the bottom of the page on which the reference is made.
• Footnotes are single-spaced.
• Consult a style manual approved by your department for samples of endnotes.
• Endnotes are numbered consecutively throughout the entire thesis.
• Endnotes may be placed at the end of each chapter or following the last page of text.
• The form for an endnote is the same as a footnote. Type the heading “endnote”.

Tables and Figures

• Tables and figures should follow immediately after first mentioned in the text or on the next page.
• If they are placed on the next page, continue the text to the bottom of the preceding page.
• Do not wrap text around tables or figures. Text can go above and/or below.
• If more clarity is provided by placing tables and figures at the end of chapters or at the end of the text, this format is also acceptable.
• Tables and Figures are placed before references.
• Any diagram, drawing, graph, chart, map, photograph, or other type of illustration is presented in the thesis as a figure.
• All tables and figures must conform to margin requirements.
• Images can be resized to fit within margins
• Table captions go above tables.
• Figure captions go below figures.
• Captions must be single spaced.

Landscape Tables and Figures

• Large tables or figures can be placed on the page landscape or broadside orientation.
• Landscape tables and figures should face the right margin (unbound side).
• The top margin must be the same as on a regular page.
• Page numbers for landscape or broadside tables or figures are placed on the 11” side.

Supplementaries

These are the general requirements for all supplementary pages.

• Supplementary pages are arranged as listed under “Organizing and Formatting the Thesis/Dissertation” and numbered consecutively.
• Headings for all supplementary pages are major headings and the formatting style needs to match chapter headings.

References or Bibliography

• The References or Bibliography heading is always a major heading and the formatting style needs to match chapter headings.
• References or Bibliography are ordered after each chapter, or at the end of the text.
• References or Bibliography must start on a new page from the chapter text.
• References are aligned flush with the left margin.
• The style for references should follow the format appropriate for the field of study.
• The style used must be consistent throughout the thesis.
• Appendices are optional and used for supplementary material.
• The Appendices heading is a major heading and the formatting style needs to match chapter headings.
• As an option the appendix may be introduced with a cover page bearing only the title centered vertically and horizontally on the page. The content of the appendix then begins on the second page with the standard one inch top margin.
• Quality and format should be consistent with requirements for other parts of the thesis including margins.
• Page numbers used in the appendix must continue from the main text.

A Foreign Language Thesis

Occasionally, theses are written in languages other than English. In such cases, an English translation of the title and abstract must be included in the document.

• Submit one title page in the non-English language (no page number printed).
• Submit one title page in English (no page number printed).
• Submit one abstract in the non-English language (page number is ii).
• Submit one abstract in English (page number is numbered consecutively from previous page – example: if the last page of the abstract in the foreign language is page ii the first page of the abstract in English is numbered page iii).

Multipart Thesis

In some departments, a student may do research on two or more generally related areas which would be difficult to combine into a single well-organized thesis. The solution is the multi-part thesis.

• Each part is considered a separate unit, with its own chapters, bibliography or list of references, and appendix (optional); or it may have a combined bibliography or list of references and appendix.
• A single abstract is required.
• The pages of a multi-part thesis are numbered consecutively throughout the entire thesis, not through each part (therefore, the first page of Part II is not page 1).
• The chapter numbering begins with Chapter 1 for each part, or the chapters may be numbered consecutively.
• Pagination is consecutive throughout all parts, including numbered separation sheets between parts.
• Each part may be preceded by a separation sheet listing the appropriate number and title.

Writing Tips & Tools

• APA Resources
• Formatting Tables & Figures
• Heading Levels
• In-Text Citations
• Paraphrases & Quotations
• Reference List
• Setting Up an APA Paper
• Step 1: Prewrite
• Step 2: Outlining/Planning
• Step 3: First Draft
• Step 4: Revision
• Step 5: Editing/Proofreading
• Active vs. Passive Voice
• Comma Usage
• Parallel Structure
• Subject-Verb Agreement
• Academic Writing Genres & Common Assignments
• Defining & Avoiding Plagiarism
• Introduction vs. Abstract
• Knowing When to Cite
• Paraphrasing & Quoting Sources
• Utilizing Turnitin
• Primary vs. Secondary Sources
• Scholarly vs. Popular Sources
• Adding & Formatting Page Numbers
• Basic Tips for Microsoft Word
• Creating a Table of Contents & List of Tables/Figures
• Page & Section Breaks
• The Styles Pane
• Using Track Changes & Comments
• Abstracts (Saybrook Handbook)
• Appendices (Saybrook Handbook)
• Dissertation Finalization This link opens in a new window
• Front Matter
• Resources for Writing a Dissertation or Thesis
• Saybrook Handbook of Format & Style for Dissertations, Theses, Projects, & Capstones This link opens in a new window
• Get Writing Help This link opens in a new window

Our Top Resources

• Writing Coach Appointments
• Saybrook Handbook of Format & Style
• Sample APA Student Paper
• Student Paper Template
• Dissertation Template
• Editing Checklist
• Revision Checklist

​​It is rare for student papers to utilize a table of contents or list of tables/figures. However, documents that follow the  Saybrook Handbook of Format and Style (2020)  will need to include a table of contents and, in some cases, may also require a list of tables and/or figures.

Creating a Table of Contents

To generate a table of contents in Microsoft Word, use the following instructions.

• Make sure all headings that should appear in the table of contents are tagged with the appropriate style. For instructions, see our page  The Styles Pane ​.
• Place the cursor on the page where the table of contents should be.
• Click the References tab.
• Click the “Table of Contents" button. On the drop-down menu, select “Custom Table of Contents."
• Make sure the number of levels to be displayed is correct, according to how many heading levels are present in the document.
• Click “Modify." The new dialogue box lists each table of contents (TOC) level. TOC 1 corresponds to Heading 1, and so forth. Make sure each TOC level matches APA or  Saybrook Handbook of Format & Style  requirements by clicking TOC 1 so that it is blue, clicking “Modify," and adjusting the preset formatting rules as needed. Click “Okay." Repeat this process for each TOC level needed. When all formatting has been adjusted, click “Okay." The table of contents should be generated wherever the cursor is.

Anything that is tagged with a Heading style will be pulled into the table of contents and formatted there according to the TOC formatting input.

If a video walkthrough is beneficial, check out Microsoft 365's video “ How to add a table of contents in Microsoft Word ." This video presents the basic instructions for generating a table of contents. Additionally, check out Microsoft's webpage “ Format or customize a table of contents " for more details on how to make modifications to the table.

Updating the Entire Table of Contents: During the writing and revision process, headings may be added, deleted, or edited in the body of the paper. Rather than typing in new headings or editing headings in the table of contents manually, the table of contents can be automatically updated to match the document.

• Right-click anywhere over the table of contents.
• Select “Update Field."
• Select “Update entire table," then click “Okay."

Updating Page Numbers in the Table of Contents: Headings may shift to different pages during revision. The page numbers of a table of contents generated in Microsoft Word can be automatically updated.

• Right-click over the page numbers.
• Select “Update page numbers only," then click “Okay." 

Creating A List of Tables/Figures

Some longer works (e.g., dissertations) that use tables and/or figures must have a corresponding list of tables and/or figures. See ​ Formatting Tables & Figures ​ for more information about what lists of tables and/or figures are, what documents require them, and how they should be formatted.

The video  How to Insert a List of Tables or Figures in Word  from the Research Masterminds YouTube channel provides a thorough explanation of how to insert a list of tables or figures into your Word document. Watch the video or use the following instructions to insert a list of tables/figures.

• Highlight the name of the first table or figure (such as “Table 1").
• On the References tab, select “Insert Caption."
• In the window that pops up, make sure the Label is set to the correct type, either “Table" or “Figure." Click “Okay." This usually changes the font of the table/figure name so that it is formatted incorrectly.
• Edit the font of the table/figure name so that it is formatted correctly.
• Then, highlight the corrected font, go to the Home tab, and in “Styles," find the S​​tyle box marked “Caption."
• Right-click “Caption" and select “Update Caption to Match Selection." This will keep Microsoft Word from changing the font formatting of any other table/figure names that still need to be captioned.
• Proceed with captioning the rest of the tables/figures in order, following the steps given, with the exception of steps 4, 5, and 6, as there should be no need to edit font formatting.

Once all tables/figures are captioned, the list is ready to be generated.

• Put the cursor in the spot where the list of tables/figures should appear.
• Open the References tab and click “Insert Table of Figures."
• Under, “General," make sure the proper Caption label is selected, “Tables" or “Figures" depending on which list is being generated.
• The layout of the list can be modified by selecting “Modify," “Modify," and then updating formatting settings as needed.
• Click “Okay" to generate the list of tables/figures.
• If a second list is needed, insert a page break and follow the same instructions to generate the next list. ​
• << Previous: Basic Tips for Microsoft Word
• Next: Page & Section Breaks >>
• Last Updated: Jun 20, 2024 1:31 PM
• URL: https://tcsedsystem.libguides.com/Writing-Resources

• Updated 18 April 2024
• Published 24 December 2022

Dissertation Table of Content | Tips and Example

Table of contents.

The table of contents (ToC) is part of the series on  how to write your dissertation. It is crucial for academic manuscripts like dissertations, theses, and research papers. It serves as a detailed roadmap and structured framework for your work, aiding in research presentations. While essays or reports may not require a TOC due to their brevity, it is indispensable for research papers, theses, dissertations, and Master’s projects. Typically, it spans about 2-3 pages and is positioned between the abstract and introduction chapter .

The question is, how to choose what kind of table of contents you need for your dissertation. This mainly depends on your university’s guidelines and the length of your manuscript. There are some academic writing styles, such as APA paper format and MLA style. However, here we go over the most common versions:

Single-level ToC

In this format, we utilize the main headers of your dissertation, encompassing all the chapters from the introduction to the appendices. This approach is commonly employed for shorter documents, but it may lack the necessary level of detail for larger works that require a more comprehensive exploration.

Subdivided ToC

This is the most used format, as it includes both the main headers, but also the first sub-header (level 2). The reader will be able to see what to expect in more detail.

Multi-level ToC

This format includes the headers (level 1), sub-headers (level 2), and all level 3 sub-headers. This might be ideal when creating a skeleton manuscript, when you are planning to see what you will include in the chapters. Most often, the level 3 header will be deleted, as the length of the ToC increases beyond what is acceptable.

In the next part, I will share some examples on what this could look like.

2                              

TABLE OF CONTENTS

Introduction…………………………………………………………………………………………………………………………………………………………….3

Literature review…………………………………………………………………………………………………………………………………………………..4

Introduction……………………………………………………………………………………………………………………………………………………………5

Literature Review………………………………………………………………………………………………………………………………………………….6

Methodology…………………………………………………………………………………………………………………………………………………………….7

Results………………………………………………………………………………………………………………………………………………………………………..8

Discussion………………………………………………………………………………………………………………………………………………………………..9

Conclusion………………………………………………………………………………………………………………………………………………………………..10

Reference list…………………………………………………………………………………………………………………………………………………………..11

Appendix A:……………………………………………………………………………………………………………………………………………………………….12

Appendix B:……………………………………………………………………………………………………………………………………………………………….13

Scope of the research…………………………………………………………………………………………………………………………..6

Problem statement………………………………………………………………………………………………………………………………..7

Aim…………………………………………………………………………………………………………………………………………………………………..8

Research questions……………………………………………………………………………………………………………………………….9

Hypothesis………………………………………………………………………………………………………………………………………………….10

Outline……………………………………………………………………………………………………………………………………………………………11

Literature Review………………………………………………………………………………………………………………………………………………….12

Experiments………………………………………………………………………………………………………………………………………………..13

Case studies………………………………………………………………………………………………………………………………………………..14

Longitudinal studies………………………………………………………………………………………………………………………………15

Methodology…………………………………………………………………………………………………………………………………………………………….16

Sampling method…………………………………………………………………………………………………………………………………….17

Data analysis………………………………………………………………………………………………………………………………………………18

Results………………………………………………………………………………………………………………………………………………………………………..19

Survey data………………………………………………………………………………………………………………………………………………….19

Interview data…………………………………………………………………………………………………………………………………………….20

Discussion………………………………………………………………………………………………………………………………………………………………..21

Conclusion………………………………………………………………………………………………………………………………………………………………..22

Reference list…………………………………………………………………………………………………………………………………………………………..23

Appendix A:……………………………………………………………………………………………………………………………………………………………….24

Problem 1:………………………………………………………………………………………………………………………………………..7

Problem 2:……………………………………………………………………………………………………………………………………….7

Outline……………………………………………………………………………………………………………………………………………………………10

Literature Review………………………………………………………………………………………………………………………………………………….11

Experiments………………………………………………………………………………………………………………………………………………..11

Case studies………………………………………………………………………………………………………………………………………………..12

Longitudinal studies………………………………………………………………………………………………………………………………13

Methodology…………………………………………………………………………………………………………………………………………………………….14

Sampling method…………………………………………………………………………………………………………………………………….15

Setup……………………………………………………………………………………………………………………………………………………16

Procedure………………………………………………………………………………………………………………………………………….16

Data analysis………………………………………………………………………………………………………………………………………………17

Results………………………………………………………………………………………………………………………………………………………………………..18

What to include?

Depending on the format you choose, the table of contents should have all the chapters and the sub-headers. The chapters that should be included are:

• Introduction
• Literature Review
• Methodology
• Reference list

Where you write down all the sources you’ve used.

Any data set, additional figures, or tables that may not be included in the result section should be placed here. Each appendix should be sequentially numbered using letters, starting with “A” and continuing in alphabetical order.

Appendix A: t-test data……………………………………………………………………………………………………………………………………………….89

Appendix B: SPSS data………………………………………………………………………………………………………………………………………………..95

How to create TOC in Word

• Place your cursor at the top of the page where you want the table of content.
• Click on References > Table of Contents > Automatic Table 1 (or 2).

• Edit the blue “Table of Content/Content” words to make them black, Times New Roman, size 12, centered, bold and all caps. Enter a black line after these words.
• With your cursor, go back to the tab References > Table of Contents > Custom Table of Content.

• Change the Show Levels number to whatever your preference is and click OK.
• When it asks if you want to replace the ToC, click YES and your ToC will display the right amount of levels.
• When adding new chapters and sections, you’ll have to update the ToC. This can be done by hovering your mouse over the ToC and click on Update Table at the top of the page.

• Select Update entire table and click OK.

Table of Contents for Dissertation in 2024

Table of contents, introduction.

A dissertation could never begin with an introduction right off the bat. A table of contents in a dissertation template is imperative to guide your reader through the structure of your research.

The table of contents in a dissertation is a well-organized list of chapters, sections, and figures within your document, each heading corresponding to a page number. A good table of contents page should be accurate, simple to read, and well-formatted. The formatting of the table of contents is important to ensure a clean index that helps readers navigate your high-quality paper. It should generally be of two pages only.

Where should the Table of Contents be Placed?

Typically, within the template of a thesis or a dissertation, the table of contents is positioned prior to the introduction or the main body of chapters and right after the section devoted to acknowledgments.

How should a Table of Contents be Written?

A table of contents is written by listing out the titles or chapter names of sections within your research paper, in perfect chronological order. Subsequently, the subheadings or subtitles must also be included. Finally, the page numbers corresponding to each heading have to be placed in alignment with the headings.

Check with your university or other educational institution to determine if there are any formatting guidelines you must follow.

Generally speaking, three types of headings are included within the table of contents of a dissertation . Level one headings include the Introduction, Literature Review, Methodology, and Bibliography. The subsections of these are considered level two headings while further subsections are level three headings.

What are the Components of the Table of Contents?

The title of the paper appears at the top of a table of contents, followed by the chapter names and subtitles, all listed in chronological order. The page number of the corresponding headings is positioned at the end of each line.

Appendices and Tables

All appendices should be included in your table of contents. The number of tables and figures in your dissertation will determine their inclusion within the table of contents.

In case your dissertation has more than three figures and tables, consider placing them on a different page to list them out. Otherwise, you may include them all in the table of contents.

Why is a Table of Contents Important at all?

A table of contents is extremely important for two reasons:

• First, it allows the reader to quickly locate information on specific subjects that have been organized as chapters or subtitles.
• Secondly, the table of contents assists the writer in organizing their work and arguments to ensure that significant portions of their dissertation or thesis are not overlooked.

Tips to Write a Table of Contents:

• Among scholars and researchers who author dissertations or theses, it is a general practice to work on the table of contents after completing the main body of the study. Regardless, a mock table of contents may be added to the dissertation template early on in the writing process to develop a basic framework that will guide how you will carry out your research study.
• Note that a confusing or sloppy table of contents may result in a low score or lack of academic integrity due to the lowered readability of the dissertation.
• The structure of your table of contents will be determined by your academic field and the length of your thesis. Regardless of the discipline, you must develop an organized list of all chapters in their order of appearance, with chapter subheadings properly labeled.
• Subheadings should not be listed for one chapter and then forgotten for the next. While subheadings are not always necessary, they may be considered useful when dealing with a complex subject.
• The titles of chapters and subheadings must correspond to the titles of the relevant pages. For example, if your first chapter is titled “Chapter 1: An Introduction,” it must appear on both the table of contents and as a heading for the first chapter.

Where should a Table of Contents Page be Created?

You may create a manually generated table of contents page in Microsoft Word, but the automatic function will make your life much simpler.

What not to Include in a Table of Contents?

The table of contents generally does not include the sections devoted to acknowledgments, the abstract, or the index page itself. As the first two of these are positioned before the index page, the reader will have already viewed these pages before arriving at the table of contents.

Creating an Automatic Table of Contents on MS Word –

To draft an automatic table of contents on Microsoft Word, certain heading styles must be used consistently throughout the text.

After this has been carried out, proceed as follows:

• Include a title on your contents page. Ensure that you use the standard structure for your citation style or the instructions provided by your university/department.
• Place your cursor where you want your table of contents to appear.
• Locate the Table of Contents option in the Reference tab of the ribbon.
• Select Custom Table of Contents by clicking the arrow next to the Table of Contents icon. You can choose which levels of headers to include in the table of contents and make manual modifications to each level by clicking the Modify button.
• When you are ready to input the table of contents, click OK, and it will be generated automatically.

How does One Set Headings?

To set heading styles, follow these steps:

• Determine the type of formatting required for each heading level. For example, if all level one headings should be Times New Roman, 12 pt, and boldfaced, this style may be applied to the level one headings.
• Find the Styles option on the home tab to automate this formatting for all level one headings.
• Highlight the level one heading and then right-click the Heading 1 style.
• To match the selection, choose Update Heading 1.

Highlight the headings in question and click the styles you wish to format. Then, apply the formatting to each heading in the main body of the dissertation.

The Table of Contents is Automatically Updated

We recommend students to format and update their table of contents at the very end, before submitting or printing out their dissertation , as the alignment and arrangement of text may alter throughout the final revision process. Table of contents formatting in a dissertation must ensure preciseness and accuracy of page numbers.

You may click on the Update option on the menu that appears when you right-click the table of contents, which will update the page numbers or all information within it. We hope that this brief guide of a table of contents within the template of a dissertation provides you with further guidance on how to draft and format your dissertation’s table of contents.

-Isabell S.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Frequently asked questions

What should be included in a dissertation table of contents.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract in the table of contents.

Frequently asked questions: Dissertation

Dissertation word counts vary widely across different fields, institutions, and levels of education:

• An undergraduate dissertation is typically 8,000–15,000 words
• A master’s dissertation is typically 12,000–50,000 words
• A PhD thesis is typically book-length: 70,000–100,000 words

However, none of these are strict guidelines – your word count may be lower or higher than the numbers stated here. Always check the guidelines provided by your university to determine how long your own dissertation should be.

A dissertation prospectus or proposal describes what or who you plan to research for your dissertation. It delves into why, when, where, and how you will do your research, as well as helps you choose a type of research to pursue. You should also determine whether you plan to pursue qualitative or quantitative methods and what your research design will look like.

It should outline all of the decisions you have taken about your project, from your dissertation topic to your hypotheses and research objectives , ready to be approved by your supervisor or committee.

Note that some departments require a defense component, where you present your prospectus to your committee orally.

A thesis is typically written by students finishing up a bachelor’s or Master’s degree. Some educational institutions, particularly in the liberal arts, have mandatory theses, but they are often not mandatory to graduate from bachelor’s degrees. It is more common for a thesis to be a graduation requirement from a Master’s degree.

Even if not mandatory, you may want to consider writing a thesis if you:

• Plan to attend graduate school soon
• Have a particular topic you’d like to study more in-depth
• Are considering a career in research
• Would like a capstone experience to tie up your academic experience

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

For a stronger dissertation conclusion , avoid including:

• Important evidence or analysis that wasn’t mentioned in the discussion section and results section
• Generic concluding phrases (e.g. “In conclusion …”)
• Weak statements that undermine your argument (e.g., “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

A theoretical framework can sometimes be integrated into a  literature review chapter , but it can also be included as its own chapter or section in your dissertation . As a rule of thumb, if your research involves dealing with a lot of complex theories, it’s a good idea to include a separate theoretical framework chapter.

A literature review and a theoretical framework are not the same thing and cannot be used interchangeably. While a theoretical framework describes the theoretical underpinnings of your work, a literature review critically evaluates existing research relating to your topic. You’ll likely need both in your dissertation .

While a theoretical framework describes the theoretical underpinnings of your work based on existing research, a conceptual framework allows you to draw your own conclusions, mapping out the variables you may use in your study and the interplay between them.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation , such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review , research methods , avenues for future research, etc.)

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

In most styles, the title page is used purely to provide information and doesn’t include any images. Ask your supervisor if you are allowed to include an image on the title page before doing so. If you do decide to include one, make sure to check whether you need permission from the creator of the image.

Include a note directly beneath the image acknowledging where it comes from, beginning with the word “ Note .” (italicized and followed by a period). Include a citation and copyright attribution . Don’t title, number, or label the image as a figure , since it doesn’t appear in your main text.

Definitional terms often fall into the category of common knowledge , meaning that they don’t necessarily have to be cited. This guidance can apply to your thesis or dissertation glossary as well.

However, if you’d prefer to cite your sources , you can follow guidance for citing dictionary entries in MLA or APA style for your glossary.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, an index is a list of the contents of your work organized by page number.

The title page of your thesis or dissertation goes first, before all other content or lists that you may choose to include.

The title page of your thesis or dissertation should include your name, department, institution, degree program, and submission date.

Glossaries are not mandatory, but if you use a lot of technical or field-specific terms, it may improve readability to add one to your thesis or dissertation. Your educational institution may also require them, so be sure to check their specific guidelines.

A glossary or “glossary of terms” is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. Your glossary only needs to include terms that your reader may not be familiar with, and is intended to enhance their understanding of your work.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, dictionaries are more general collections of words.

An abbreviation is a shortened version of an existing word, such as Dr. for Doctor. In contrast, an acronym uses the first letter of each word to create a wholly new word, such as UNESCO (an acronym for the United Nations Educational, Scientific and Cultural Organization).

As a rule of thumb, write the explanation in full the first time you use an acronym or abbreviation. You can then proceed with the shortened version. However, if the abbreviation is very common (like PC, USA, or DNA), then you can use the abbreviated version from the get-go.

Be sure to add each abbreviation in your list of abbreviations !

If you only used a few abbreviations in your thesis or dissertation , you don’t necessarily need to include a list of abbreviations .

If your abbreviations are numerous, or if you think they won’t be known to your audience, it’s never a bad idea to add one. They can also improve readability, minimizing confusion about abbreviations unfamiliar to your reader.

A list of abbreviations is a list of all the abbreviations that you used in your thesis or dissertation. It should appear at the beginning of your document, with items in alphabetical order, just after your table of contents .

Your list of tables and figures should go directly after your table of contents in your thesis or dissertation.

Lists of figures and tables are often not required, and aren’t particularly common. They specifically aren’t required for APA-Style, though you should be careful to follow their other guidelines for figures and tables .

If you have many figures and tables in your thesis or dissertation, include one may help you stay organized. Your educational institution may require them, so be sure to check their guidelines.

A list of figures and tables compiles all of the figures and tables that you used in your thesis or dissertation and displays them with the page number where they can be found.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction .

You may acknowledge God in your dissertation acknowledgements , but be sure to follow academic convention by also thanking the members of academia, as well as family, colleagues, and friends who helped you.

A literature review is a survey of credible sources on a topic, often used in dissertations , theses, and research papers . Literature reviews give an overview of knowledge on a subject, helping you identify relevant theories and methods, as well as gaps in existing research. Literature reviews are set up similarly to other  academic texts , with an introduction , a main body, and a conclusion .

An  annotated bibliography is a list of  source references that has a short description (called an annotation ) for each of the sources. It is often assigned as part of the research process for a  paper .  

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

In the discussion , you explore the meaning and relevance of your research results , explaining how they fit with existing research and theory. Discuss:

• Your  interpretations : what do the results tell us?
• The  implications : why do the results matter?
• The  limitation s : what can’t the results tell us?

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

In a thesis or dissertation, the acknowledgements should usually be no longer than one page. There is no minimum length.

The acknowledgements are generally included at the very beginning of your thesis , directly after the title page and before the abstract .

Yes, it’s important to thank your supervisor(s) in the acknowledgements section of your thesis or dissertation .

Even if you feel your supervisor did not contribute greatly to the final product, you must acknowledge them, if only for a very brief thank you. If you do not include your supervisor, it may be seen as a snub.

In the acknowledgements of your thesis or dissertation, you should first thank those who helped you academically or professionally, such as your supervisor, funders, and other academics.

Then you can include personal thanks to friends, family members, or anyone else who supported you during the process.

Ask our team

Want to contact us directly? No problem.  We  are always here for you.

• Email [email protected]
• Start live chat
• Call +1 (510) 822-8066
• WhatsApp +31 20 261 6040

Our team helps students graduate by offering:

• A world-class citation generator
• Plagiarism Checker software powered by Turnitin
• Innovative Citation Checker software
• Professional proofreading services
• Over 300 helpful articles about academic writing, citing sources, plagiarism, and more

Scribbr specializes in editing study-related documents . We proofread:

• PhD dissertations
• Research proposals
• Personal statements
• Admission essays
• Motivation letters
• Reflection papers
• Journal articles
• Capstone projects

Scribbr’s Plagiarism Checker is powered by elements of Turnitin’s Similarity Checker , namely the plagiarism detection software and the Internet Archive and Premium Scholarly Publications content databases .

The add-on AI detector is powered by Scribbr’s proprietary software.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Create a Table of Contents for Dissertation, Thesis or Paper & Examples

Table of contents

Use our free Readability checker

A dissertation table of contents is a list of the chapters and sections included in a dissertation or thesis, along with their page numbers. It helps to navigate the document easily and locate specific information. Each chapter or section should be listed with its corresponding page number. The table of contents should be formatted according to the guidelines of the specific style guide being used, such as APA or MLA.

We would guess that students usually start working on the table of contents at the last minute. It is quite apparent and makes sense, as this is the list of chapters and sections with page locations. Do you think it's easy? 

From our experience, it can be quite tricky to organize everything according to APA, Chicago, or any other academic writing style. In this blog, we will discuss how to write a table of contents for a research paper , thesis or dissertation in Microsoft Word. We will create it together to guide students through the process. 

Also, here you will find examples of table of contents created by thesis writers at StudyCrumb . Let’s go!

What Is a Table of Contents: Definition

It is obvious that the table of contents (TOC) is an essential manuscript part you can’t skip. If you are dealing with a dissertation, thesis or research paper, you need to know how to build it in accordance with academic guidance. This is a detailed roadmap for your work and outlined structure you can follow for a research presentation. 

In case you are working on an essay or report, you may not include the table of contents, as it is a short academic text. But for the research paper, thesis or dissertation, table of contents is essential and required. It is possible to say the same about any Master’s project. It should be located between the dissertation abstract and introduction chapter. In most cases, it is about 2-3 pages long. 

Our expert dissertation writing service prepared a great template that can be used for your work. Make your research formatting easy with ready solutions!

Types of Table of Contents

How to choose which table of contents will fit your research paper, thesis, dissertation, or report best? Make a decision based on your work length. Some academic writing styles, such as APA paper format or MLA style , have specific formatting for this list. 

However, we will outline the most commonly used typology:

• Single-level table of contents. At this type, we use only chapters. For instance, you will have an Introduction, Literature Review, methodology, and other chapters with page numbers. It can be used for shorter research work. For long writing forms like manuscripts, it can be too broad, and you will need to go into details.
• Subdivided table of contents. The most frequently used form to organize the contents table. It will include not only chapters but also sections — a level 2 subheading for each part. It will help to be more specific about what to expect in each part of your research work.
• Table of contents with multiple levels. This is a more divided structure, including subheadings with a level 3 for each section. Quite often, those subheadings can be rewritten or deleted during the last editing. It is essential to keep them in the right order.

Before you decide which type will work best for you, let us share with you some examples of each formatting style.

Example of Table of Contents With a Single Level

Introduction: The Misinformation Roots ………..…… 3 Literature Review .....................................….....………… 10 Research Methodology and Design ……................. 24 Results.............................................................................. 28 Discussion ....................................................................... 32

Sometimes, you will need to put an extra emphasis on subsections. Check this layout to see how your subheadings can be organized.

Example of Table of Contents Page with Subdivided Levels

Introduction: Information War ............……………….. 3       Background…………………………………….………..…… 4       Current State ……………………………………...…...…… 5       Defining Research Questions………………………. 9 Literature Review………………………...……………..……... 11       The Roots of Information Warfare ………....… 11        Information Wars …………………………….………..… 14        Cyber Wars Research ........................................ 17

If you are working on a lengthy, complex paper, this outline will suit your project most. It will help readers navigate through your document by breaking it down into smaller, more manageable sections.

Multi-Level Table of Contents Page Example

Introduction……………………………………………….......……….… 3       Emergence of Climate Change ………..……....….….. 3       Key Activist Groups in Climate Change .............. 5              Greenpeace International ………..…………......... 9              European Climate Foundation …….……………. 10              WWF ……………………………………….……….............. 11        Significant Movements ……………….………....……… 13 Literature Review ……………………………………......…………. 15

What Sections Should Be Included in a Table of Contents?

To start with, the scientific table of contents should include all chapters and its subheading. It is important to choose the formatting that will give your readers a full overview of your work from the very beginning. However, there are other chapters that you may miss constructing the 2-pager table. So, let's look at all you need to include:

• Dissertation introduction
• Literature review
• Research methodology
• Results section
• Dissertation discussion
• Conclusion of a thesis
• Reference list. Mention a number of a page where you start listing your sources.
• Appendices. For instance, if you have a data set, table or figure, include it in your research appendix .

This is how the ideal structured dissertation or research paper table of contents will look like. Remember that it still should take 2 pages. You need to choose the best formatting style to manage its length.

Tables, Figures, and Appendices in TOC

While creating a table of contents in a research paper, thesis or dissertation, you will need to include appendices in each case you have them. However, the formatting and adding tables and figures can vary based on the number and citation style. If you have more than 3 tables or figures, you may decide to have all of them at the end of your project. So, add them to the table of contents. 

Figures, graphics, and diagrams in research papers, dissertations and theses should be numbered. If you use them from another source, ensure that you make a proper citation based on the chosen style guide.

Appendix in Table of Contents Example

Appendix A. Row Data Set…………………………………… 41 Appendix B. IBR Data………………………………………….… 43 Appendix C. SPSS Data………………………………………… 44

What Shouldn't Be Included in a Table of Contents?

When creating a dissertation table of contents, students want to include everything they have in a document. However, some components should not be on this page. Here is what we are talking about:

• Thesis acknowledgement
• Paper abstract
• The content list itself

Acknowledgement and abstract should be located before the content list, so there is no need to add them. You need to present a clear structure that will help your readers to navigate through the work and quickly find any requested information.

How to Create a Table of Contents for a Research Paper or Dissertation In Word?

It may look like working with this list can take a long. But we have one proposal for our users. Instead of writing a table of contents manually, create it automatically in Microsoft Word. You do not need any specific tech knowledge to do this. Let’s go through this process step-by-step and explain how to make a table of contents for a research paper or dissertation in a few clicks.

• Open Home tab and choose the style for your table of contents (ToC next).
• Apply heading 1 to your chapters, heading 2 to the subheading, and if needed heading 3 to the level 3 heading.
• Next, you are going to create a research paper or PhD dissertation table of contents. Open References and choose ToC.
• Choose the citation style for your work. For example, let’s choose APL for now. Meeting all style requirements (bold font, title formatting, numbers) is essential.
• Define the number of levels for your dissertation or thesis table of contents. In case you want to have 3 levels, choose Automatic Table 2.
• You are done! Click ok, and here is your page with listed chapters!

You see how easy it can be! Every time you make changes to your text or headings, it will be automatic.

Updating Your Table of Contents in MS Word

Table of contents of a research paper or dissertation is created, and you continue to edit your work until submission. It is common practice, and with MS Word, you can automate all the updates. 

Let’s outline this process in our step-by-step guide!

• Right-click on your ToC in a document.
• Update field section is next.
• Choose “update ToC."
• Here, you can update your entire ToC — choose an option that works the best for you!

As you may see, working with automated solutions is much easier when you write a dissertation which has manifold subsections. That is why it is better to learn how to work on MS Word with the content list meaning be able to manage it effectively.

Table of Contents Examples

From our experience, students used to think that the content list was quite a complicated part of the work. Even with automated solutions, you must be clear about what to include and how to organize formatting. To solve the problem and answer all your questions, use our research paper or dissertation contents page example. Our paper writers designed a sample table of contents to illustrate the best practices and various styles in formatting the work. 

Check our samples to find advanced options for organizing your own list.

Example of Table of Contents in Research Paper

As you can see, this contents page includes sections with different levels.

Thesis/Dissertation Table of Contents Example

Have a question about your specific case? Check samples first, as we are sure you can get almost all the answers in our guides and sample sets. 

>> Read more: APA Format Table of Contents

Tips on Creating a Table of Contents

To finalize all that we shared on creating the table of contents page, let’s go through our tips list. We outline the best advice to help you with a dissertation table of contents.

• Use automated solutions for creating a list of chapters for your report, research papers, or dissertations — it will save you time in the future.
• Be clear with the formatting style you use for the research.
• Choose the best level type of list based on the paper length.
• Update a list after making changes to the text.
• Check the page list before submitting the work.

Bottom Line on Making Table of Contents for Dissertations/ Papers

To summarize, working with a research paper, thesis or dissertation table of contents can be challenging. This article outlines how to create a table of contents in Word and how to update it appropriately. You can learn what to include in the content list, how long it can be, and where to locate it. Write your work using more than one table of contents sample we prepared for students. It is often easy to check how the same list was made for other dissertations before finalizing yours. We encourage you to learn how to create a list with pages automatically and update it. It will definitely make your academic life easier.

Not sure if your work 's quality level is enough for getting a top-notch result? We’ve got you covered! Our team of skilled academic writers is always ready to help once you ask “ write my dissertation for me !" Just select your writer, send them your requirements and get a custom study tailored to your instructions.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

WTO / Personal / Lists / Free Table of Contents Templates (for Microsoft Word)

Free Table of Contents Templates (for Microsoft Word)

Whether you are writing a book, large essay, dissertation, or other longer academic papers, you will have to include a table of contents. It will act as a roadmap for the reader to each portion of your writing. It helps the reader to locate specific information in a document or revisit their favorite parts easily within the text. A well-structured TOC should simplify the way the reader finds what they are looking for and should always be placed on a separate page, just after the first page of an academic paper and after the abstract.

Depending on the type of writing, you may find that different documents require different styles of a TOC. Some may require numbers, while others may require a non-numbered TOC. It is, therefore, the writer’s duty to check the type of TOC they are required to include in their writing.

Free Table of Contents Templates

Simple templates

What is a Table of Contents?

A Table of Contents (TOC) is an organized list of all the parts of a document or book organized in the order in which the parts appear.

The TOC usually contains the titles, chapters, figures, and major sections of a document clearly labeled by their page number. It should be added last or updated after completing the whole document or book to capture all the contents accurately.

The Purpose of table of contents

If a book, business proposal , business report , or publication is long enough to include chapters, then a TOC will likely be included at the beginning of the book, report, or publication.

The TOC provides a sequential list of the book’s organizational structure, most commonly denoting the title, chapter number, and the starting page location. The chapter, page number, and title will help guide the reader in finding specific sections.

Basically, it serves two main purposes; one is to provide the reader with a general overview of what is contained in the document and how the content is organized, and the other is to enable the reader to go directly to the specific section of an on-line document.

Key Elements of a Table of Contents

The TOC is where one lists the chapters and major sections of their document, together with their page numbers. A clear and well-out table is very important as it indicates a quality paper is structured.

The key elements that should be included in the TOC are:

• The page titles
• Clear headings and subheadings
• The page numbers that show where in the document each section can be found

When creating your table, make sure to include all level one and two headings. You may also decide to include level three headings, although they are optional to include and should not be included in the TOC has reached its maximum length of two pages.

Level One:   CHAPTER 2: Literature Review

Level Two: 2.1 Overview of Information

Level Three: 2.1.1 Discipline of Knowledge

Ensure that you use clear headings throughout your document to make your table easy to understand. Keep in mind that the reader will see the table first before reading through your document.

Other things to include in your table include the appendices and tables. Including these two, however, depend largely on how many there are in your document.

If there are more than three tables and figures, you might consider listing them on a separate page. Else, you can include them in your table.

Steps to Create a Table of Contents in MS Word

For you to create a TOC in Microsoft Word, you must first define what you’d like to include in this part. First, start off by applying the different heading styles throughout your document.

Once you’ve done that, follow these steps to insert a TOC in MS Word automatically:

Add a title on the TOC page. Ensure that you follow the standard format specific to your document or as per your department’s guidelines.

Put your cursor where you want the table to go. The table is usually included between the abstract and the introduction.

In the ribbon, find the reference section and locate the TOC section. Use the search tab on the ribbon to search for the table.

Click the arrow that is next to the TOC icon and select Custom Table of Contents. Here, select the level of heading that you would like to include in your table and also make the necessary adjustments to each level by clicking the modify button.

Click on Custom table of contents.

After you’ve made sure that everything is OK. Click OK, and your TOC will be automatically generated.

Tips on Preparing Table of Contents

It is recommended that you use your TOC template last after to make sure that it provides a clear overview of your document. You can still draw up a mock TOC in your early stages of writing to help you formulate a structure and think through your topics and how you are going to research.

Make sure that all the heading levels are properly defined in your document before inserting the template.

Remember that the reader will most likely go through your table first before diving into the document to get an overview of what to expect. Make sure that your TOC is clear and that it captures your entire document.

Frequently Asked Questions

No, the TOC is basically a snapshot of the headings, tables, and page numbers in a document and does not automatically update itself as you make changes. Anytime you make changes to your document, you can update it by simply right-clicking on it and selecting the update field.

No, the TOC is usually included between the abstract and the introduction.

Yes, the maximum length of a TOC should be two pages, regardless of the type of document you are writing.

Regardless of your document’s type or size, using a TOC can help direct the readers to exactly where they want to be. Other than making your document more reader-friendly, the table also makes it easier for the author to go back and change or update contents throughout their document if necessary. By default, MS Word generates a TOC when you use the first three built-in heading styles, i.e., Heading 1, Heading 2, and Heading 3. To apply the different heading styles, simply select the style from the “Home” tab, or you can use a TOC template. Once you’ve properly defined the heading styles, follow the procedure given above to insert your table automatically.

About This Article

Was this helpful?

Great! Tell us more about your experience

Not up to par help us fix it, keep reading.

12 Perfect Examples of Salutatorian Speech

12 Free Yes No Flowchart Templates (PowerPoint)

8 Free Move-Out Cleaning Checklists – Editable

10 Free Homeschool Report Card Templates

Thank you for your feedback.

Your Voice, Our Progress. Your feedback matters a lot to us.

Formatting Examples

Use the formatting checklist to check that all of your content is formatted according to Graduate College requirements. Also, schedule a format check  with a CCE thesis/dissertation consultant to get feedback on your formatting.

 Title Page

Including a Title Page is required . Some of the most common thesis/dissertation mistakes are made on the title page. Follow the bullets below, paying close attention to capitalization, spacing, line breaks, actual date of graduation, and copyright statement. These bullets will guide you through the title page.

• No page number is displayed on the title page.  It is always assumed page 'i'
• Title is at top of page, formatted with Title style
• Title is single spaced
• Title does not contain a period
• The first word in the title and the first word following a colon are capitalized
• Proper nouns and acronyms in the title are capitalized
• The word "by" is lowercase
• BOLD  your name and the title
• Student name should match name in AccessPlus
• If student name does not match name in AccessPlus, include AccessPlus name in parenthes is under the name you are using
• The word “Thesis” or “Dissertation” is used in the “fulfillment of requirements” statement
• The phrase “MASTER OF...” or “DOCTOR OF...” is used
• Only the Major(s) and (if applicable) the specialization(s) are listed (minors are  not listed)
• Do not include Dr., Esq., Ph.D., AIA, or other titles or affiliations before or after your name or faculty names
• “Major Professor” is listed after the respective faculty’s name
• For Co-major Professors, list both as “Co-major Professor”; do not use “Major Professor”
• Committee member names are single spaced
• Either the word “Thesis” or “Dissertation” is used in the “responsibility of content” statement
• Iowa State University is listed
• Ames, Iowa is listed
• Graduation year is listed
• Copyright statement is written as: Copyright © [Name as Shown on AccessPlus], [Graduation Year]. All rights reserved.

Annotated Examples

Sample Title Page

Master's Title Page

Master's Title Page_Co-Majors

Master's Title Page_Specialization

Master's Title Page _2 Specializations

Master's Title Page_2 Majors and 3 Specializations

Mater's Title Page_Double Degree

PhD Title Page

PhD Title Page_Co-Majors

PhD Title Page_Specialization

PhD Title Page_2 Specializations

PhD Title Page_2 Majors and 3 Specializations

Sample Title Page with Alternative Student Name  

  Table of Contents

Including a Table of Contents is required . The Table of Contents shows the reader the organization of the document as well as displays the correct page numbers. The bulleted items explain various heading styles for you to follow. They also demonstrate various preliminary pages' formats.

• DEDICATION, if used, precedes the table of contents. Its heading is formatted with  Heading 0 (NOT IN TOC) style, and the page number is 'ii'
• Page is numbered using lower case Roman numerals, top center
• The heading TABLE OF CONTENTS, is formatted with  Heading 0 (NOT IN TOC) style
• Do not list 'DEDICATION' or 'TABLE OF CONTENTS' in the Table of Contents
• The order for the preliminary pages that follow the table of contents are LIST OF TABLES (optional), LIST OF FIGURES (optional), NOMENCLATURE (optional), ACKNOWLEDGEMENTS (optional), ABSTRACT (required)
• Preliminary page numbers are lower case Roman numerals in the same font as the document's text, top center
• Single-space chapter headings and subheadings. Double-space before a new chapter
• Chapter titles are uppercase letters, same size and font
• Chapter 1 begins with Arabic numeral '1' in the same font as the text
• Indent first and second level headings below the major headings. No underlining, boldface, or italics
• Ensure page numbers in the Table of Content agree with the text
• All headings must match the corresponding headings in text

Traditional Format Table of Contents

Journal Format Table of Contents

Single Journal Format Table of Contents

MFA Format Table of Contents

  List of Tables or Figures

Including a List of Tables and/or a List of Figures is optional . If you have one list, you must have the other list. Each list starts on a new page regardless of how many entries are on the page.

• The headings LIST OF FIGURES or LIST OF TABLES are formatted in Heading 0 (Included in TOC)  style
• If you have one of these lists, then you have the other as well
• Page number columns are right justified
• "Page" is written above the page numbers column (only on the first page of the list) and is right justified
• The word “Table” or “Figure” comes before the title or figure number (e.g., “Table 1. Title”)
• Titles have all the same capitalization, size, and same font
• Single-space list entries
• Double-space between list entries
• Entries should not be bolded or italicized
• Traditional format: Continue numbers throughout the document (e.g., Figure 1, Figure 2, Figure 3)
• Option 1:  Restart Figure/Table caption number for each chapter (e.g. Figure 1, Table 1),  write "Chapter 1", "Chapter 2", Chapter X, etc. to separate each chapter section in the List of Figures and/or List of Tables. 
• Option 2: Use Figure/Table caption number with each chapter number, (e.g. Figure 2.1, Figure 2.2, etc. or Table 2.1, Table 2.2, etc.), write Figure/Table + Chapter number followed by figure/table number for the respective chapter.

List of Tables Traditional Format

List of Figures Traditional Format

List of Tables Journal Article Format (Option 1: Restart numbering)

List of Figures Journal Article Format (Option 1: Restart numbering)

List of Tables Journal Article Format (Option 2: Use chapter number)

List of Figures Journal Article Format (Option 2: Use chapter number)

An abstract is required . The abstract is a concise summary of the dissertation or thesis’s purpose, highlights the main points, states the method used, provides findings, and states conclusions. Oftentimes, readers only read the abstract to determine if they should read the document.

• ABSTRACT in Heading 0 (Included in TOC)
• Double-spaced 
• Indent paragraphs like other paragraphs in your dissertation/thesis
• There is no word limit for the ABSTRACT

Abstract Page

 Traditional Body Format

There are two format styles—traditional and journal. The traditional format is basically one document; whereas, journal is a compilation of several manuscripts for journal publication. See the Journal Article Format  section for instructions for papers including journal publications.

• Begin first page of Chapter 1 with ‘1’. Numbers are the same font as the document’s text
• All chapter titles are written in Heading 1   style, which is centered, bold, and uppercase
• All non-chapter, high-level section (Preliminary Pages, Reference/Bibliography, and Appendix) titles are formatted in Heading 0 (Included in TOC) , which is centered, bold, and uppercase
• Indent all paragraphs
• No blank pages
• Recommended: no excessive white space in text. Pages should be ¾ filled, unless it’s the last page of the chapter
• Recommended: Chapter section headings are bold and centered with title case. Use Heading 2  style
• Recommended: Chapter subsection headings are bold, left flush, sentence case. Use Heading 3  style
• Format headings consistently throughout the manuscript
• Differentiation exists between heading levels
• At least two lines of text should be included on a page before a paragraph is continued to the next page
• Headings or subheadings must include at least two lines of text at the bottom of a page
• Include the first page of the Institutional Review Board (IRB) approval in the appendix. Refer to it in the text

 Journal Article Format

This manuscript format refers to the use of articles and/or book chapters to replace the standard thesis/dissertation chapters. Publication of the manuscript(s) is not a requirement of this format. The graduate student is the major contributor and writer of the manuscript(s). In the case of multiple authorship, the contribution of each author is detailed in the Introduction or footnotes.

• Begin CHAPTER 1. GENERAL INTRODUCTION with page ‘1’. Numbers are the same font as the document’s text
• Chapter 1 must be titled “GENERAL INTRODUCTION” and the final chapter must be titled “GENERAL CONCLUSION”
• All chapter titles are written in Heading 1  style, which is centered, bold, and uppercase
• Author affiliations
• References or Bibliography
• Figures and Tables 
• Continue the text of the paper on the same page as the title and abstract. Chapter titles should not stand alone on a page
• The References section should appear continuously after the manuscript text; it does not start on a new page
• Format headings consistently throughout each chapter
• At least two lines of text should be included on a page. This includes paragraphs that carry over to the next page
• Appendices must be included within the respective chapters, NOT as sections at the end of the thesis/dissertation. See the Appendix section  for more details on specific formatting requirements

Author Affiliation

 Bibliography or References

Including a bibliography or reference section is required . Every thesis/dissertation that uses other sources, either by direct quotation or reference, must have a bibliography or listing of these sources at the end before the Appendices. The organization of references or bibliography according to specific disciplines can be accepted if approved by the committee.

• For Journal Article format, use Heading 2 at the end of each chapter before any appendix(ces). The references continue after the body of the text (not start on a new page)
• For Traditional format, use Heading 0 (Included in TOC) after the final chapter, before any appendix(ces). Start on a new page

Citation Style Guides

Traditional Format References

Journal Format References

Discipline-specific Organization

Use one or more appendices for materials that do not pertain directly, but are relevant, to the main text. Examples of appendix material include survey instruments, Institutional Review Board approval, permission forms, additional data, or raw data. The material within the appendices may be in a different font or use different spacing from the main text of the dissertation/thesis.

• Appendix. Title
• Appendix A. Title
• Appendix B. Title
• Lettering schema restarts in every chapter
• APPENDIX. TITLE
• APPENDIX A. TITLE
• APPENDIX B. TITLE
• Number all pages with the same font and location as body of thesis/dissertation pages
• Fonts may be different

 Tables, Figures & Schemas

• Include tables, figures, and schema in the text below their first reference in the text or they can be grouped at the end of each chapter. Use a consistent style throughout
• Table, figure, and schema margins should be the same as the manuscript’s pages
• Position table and figure captions relative to the table/figure consistently throughout the manuscript (Traditional) or chapter (Journal Article).
• Position schema captions at the top or bottom consistently
• There must be 2 lines of the caption on the same page as the figure or table
• Table/figure/schema too large to fit on one page: use “Table X continued' at the top of the table on each subsequent page. “Figure X continued” above or below the figure on each subsequent page
• Turn landscape tables, figures, and schema so the top of the table/figure is located to the left
• Page numbers on landscape pages should not turn with the table/figure. Locate on the 8.5' end of the page in the same position and orientation as the other page numbers

Table Example

Table Continued Example

Figure Example

Figure Continued Example (Long Caption)

Figure Continued Example (Long Figure)

Figure in Portrait and Landscape Orientation

Page Numbers of Landscape Pages

• University of Michigan Library
• Research Guides

Microsoft Word for Dissertations

Tips & tricks.

• Introduction, Template, & Resources
• Formatting for All Readers
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example
• Images, Charts, Other Objects
• Footnotes, Endnotes, & Citations
• Cross-References
• Appendix Figures & Tables
• Table of Contents
• List of Figures/Tables
• Chapter and Section Numbering
• Page Numbers
• Landscape Pages
• Combining Chapter Files
• Commenting and Reviewing
• The Two-inch Top Margin
• Troubleshooting
• Finalizing Without Styles
• Preparing Your Final Document

This is just a collection of tips and tricks we think you'll find useful, but which don't really fit anywhere else in this Guide.

How do I keep a table from splitting across two pages?

• An explanation of this is found in our instructions for "Exporting to PDF". Mac users will run into a problem if their file size is greater than about 40MB, so either follow the instructions under "Save as PDF/A > Mac", or save your file to PDF from a Windows machine.
• How do I integrate figures and supplemental figures in the same List of Figures?
• Rackham tells me my chapter titles need to be in title case. What is title case?
• Can I divide my dissertation into "Parts"?

• Go to the Home tab 

• In the dialog box that appears, click the Line and Page Breaks tab

• Click  OK .

Now, even if you add text above that table, as soon as it gets to the point that it would normally push the caption or the last row to another page, instead it will move the whole table and caption/title to the next page.

Exporting to PDF

After spending so much time ensuring that the Word document is accessible, it is now time to export the Word document to PDF so that all the accessibility features are preserved. First we'll make sure that your fonts will be embedded in your document (especially important if you're using specialized or uncommon fonts). Then we'll save the file in the PDF/A format,

What is PDF/A?

PDF/A is a variation of the PDF format that ensures a document can be reproduced exactly the same way, regardless of what software -- including screenreaders -- is used. Basically, all of the information necessary for displaying the document and its elements in the same manner is embedded in the file—leaving your documents safe, accessible, and secure for the long term. 

First, set Microsoft Word to embed fonts in your PDF

1) Edit the Save settings for Microsoft Word:

• On a Mac, open the Word menu and select Preferences
• On a Windows computer, go to the File tab and open Options

2) Then, select the  Save  settings and make sure the two options to "Embed fonts in the file" and "Embed only the characters used..." are checked.

3) Click OK (Windows) or close the Save settings window (Mac)

Second, save the file as PDF/A

For most things we do in Word, there's not much difference between Mac and Windows. Unfortunately, there are some differences when it comes to this particular process, and even some differences depending on your own computer setup.

 — WINDOWS —

With your file open, go to the File tab. If you see "Save as Adobe PDF" as an option, then:

• Click Save as Adobe PDF
• In the window that appears, click Options
• Check the box for "Create PDF/A-1a:2005 compliant file"
• Ensure that the boxes for "Create Bookmarks" and "Convert Word Headings to Bookmarks" are checked.
• Select a location to save your file, and click Save
• You're done

If you do NOT see "Save as Adobe PDF" as an option in the File tab, then:

• Click Save As
• Where the file format says "Word Document", click to open the menu and instead choose "PDF *.pdf"
• Select More options , which is right under "PDF (*.pdf)"
• In the window that appears, make sure "Optimize for:" is set to Standard
• Click Options
• In the Options window, check the box for "PDF/A compliant"
• Check the box for "Create bookmarks using: Headings"
• Click OK to close the window
• Select the location to save your file, and click Save

 — MAC —

Word on a Mac won't give you an option to save as PDF/A directly, so we'll first have to create a PDF and then use Adobe Acrobat to convert that file to PDF/A. This adds a few steps over what Windows users have to do, unfortunately.

• With your file open, go to the File menu and select Save As...
• From the File Format: pop-up menu, select "PDF"
• Select "Best for electronic distribution"
• If Word complains that your file is too big, then start again and this time instead of "Best for electronic distribution", choose "Best for Printing". This will happen if your file size is greater than about 40MB, and it just means that the Table of Contents and your various Lists won't be "clickable".  Rackham doesn't require that, and the document will still be accessible and in good shape when we're done.

Once your PDF is finished exporting, open it in Adobe Acrobat (not Acrobat Reader)

If you don't already have Adobe Acrobat on your computer, U-M students can download it for free from here . When you launch Acrobat, be sure to log in  with your umich credentials ( more info available here ).

• With your file open in Acrobat, open the File menu and select Save as Other
• Choose  Archivable PDF (PDF/A)

My chapter titles have to be in title case. What is title case?

Case has to do with which words should be capitalized. 

• lowercase means that none of the words are capitalized.
• Sentence case means you capitalize the first word of the sentence.
• I BET YOU ALREADY KNOW WHAT UPPERCASE MEANS!
• And Title Case Means You Should Capitalize All the Major Words in the Text, but Not the Minor Ones.

If you're uncertain what might be a "major" or "minor" word, here's a fun little web site that will take care of it for you, based on the requirement of your particular Style Guide.

Can I divide my dissertation into "Parts"

Rackham generally prefers that you  not  divide your dissertation into Parts (Part I, Part II) in addition to chapters, but if you feel strongly that it is important for helping the reader understand or navigate your dissertation, then they won't turn you down if you include them.  But they  will  insist that the part title ("Part I") not be on a page by itself. So if you'd like to include Parts, place it just before the Chapter title, style the "Part" as Heading 1 and delete the "Chapter X" that will appear.  This will ensure that the title, "Part I", will have the two-inch top margin that Rackham requires.

Chapter 1 - Introduction

• Colleges & Degrees
• Academic Calendar
• International Education
• Graduate Studies
• Accreditation
• Tuition and Fees
• Parking & Maps
• Careers with CSULB
• Alumni Home
• Alumni Volunteering
• Alumni Giving

Campus Life

• Centers & Organizations
• Commencement
• Student Life
• Office of the President
• Office of the Provost
• Administration & Finance
• Student Affairs
• University Relations & Development
• Information Technology
• Beach Shops
• Campus Directory
• Enrollment Services
• Financial Aid
• Schedule of Classes
• Student Records
• 49er Foundation
• Research Foundation

1250 BELLFLOWER BOULEVARD LONG BEACH, CALIFORNIA 90840 562.985.4111

Table of Contents/Lists Pages Templates

• Table of contents template (DOC)

This Microsoft Word document can be saved to your computer to use as a template. It was created using Microsoft Office 2013 version of Word. Please email [email protected] if you have problems with the download.