how to write introduction of research synopsis

Get science-backed answers as you write with Paperpal's Research feature

How to Write a Research Paper Introduction (with Examples)

The research paper introduction section, along with the Title and Abstract, can be considered the face of any research paper. The following article is intended to guide you in organizing and writing the research paper introduction for a quality academic article or dissertation.

The research paper introduction aims to present the topic to the reader. A study will only be accepted for publishing if you can ascertain that the available literature cannot answer your research question. So it is important to ensure that you have read important studies on that particular topic, especially those within the last five to ten years, and that they are properly referenced in this section. 1 What should be included in the research paper introduction is decided by what you want to tell readers about the reason behind the research and how you plan to fill the knowledge gap. The best research paper introduction provides a systemic review of existing work and demonstrates additional work that needs to be done. It needs to be brief, captivating, and well-referenced; a well-drafted research paper introduction will help the researcher win half the battle.

The introduction for a research paper is where you set up your topic and approach for the reader. It has several key goals:

• Present your research topic
• Capture reader interest
• Summarize existing research
• Position your own approach
• Define your specific research problem and problem statement
• Highlight the novelty and contributions of the study
• Give an overview of the paper’s structure

The research paper introduction can vary in size and structure depending on whether your paper presents the results of original empirical research or is a review paper. Some research paper introduction examples are only half a page while others are a few pages long. In many cases, the introduction will be shorter than all of the other sections of your paper; its length depends on the size of your paper as a whole.

• Break through writer’s block. Write your research paper introduction with Paperpal Copilot

Table of Contents

What is the introduction for a research paper, why is the introduction important in a research paper, craft a compelling introduction section with paperpal. try now, 1. introduce the research topic:, 2. determine a research niche:, 3. place your research within the research niche:, craft accurate research paper introductions with paperpal. start writing now, frequently asked questions on research paper introduction, key points to remember.

The introduction in a research paper is placed at the beginning to guide the reader from a broad subject area to the specific topic that your research addresses. They present the following information to the reader

• Scope: The topic covered in the research paper
• Context: Background of your topic
• Importance: Why your research matters in that particular area of research and the industry problem that can be targeted

The research paper introduction conveys a lot of information and can be considered an essential roadmap for the rest of your paper. A good introduction for a research paper is important for the following reasons:

• It stimulates your reader’s interest: A good introduction section can make your readers want to read your paper by capturing their interest. It informs the reader what they are going to learn and helps determine if the topic is of interest to them.
• It helps the reader understand the research background: Without a clear introduction, your readers may feel confused and even struggle when reading your paper. A good research paper introduction will prepare them for the in-depth research to come. It provides you the opportunity to engage with the readers and demonstrate your knowledge and authority on the specific topic.
• It explains why your research paper is worth reading: Your introduction can convey a lot of information to your readers. It introduces the topic, why the topic is important, and how you plan to proceed with your research.
• It helps guide the reader through the rest of the paper: The research paper introduction gives the reader a sense of the nature of the information that will support your arguments and the general organization of the paragraphs that will follow. It offers an overview of what to expect when reading the main body of your paper.

What are the parts of introduction in the research?

A good research paper introduction section should comprise three main elements: 2

• What is known: This sets the stage for your research. It informs the readers of what is known on the subject.
• What is lacking: This is aimed at justifying the reason for carrying out your research. This could involve investigating a new concept or method or building upon previous research.
• What you aim to do: This part briefly states the objectives of your research and its major contributions. Your detailed hypothesis will also form a part of this section.

How to write a research paper introduction?

The first step in writing the research paper introduction is to inform the reader what your topic is and why it’s interesting or important. This is generally accomplished with a strong opening statement. The second step involves establishing the kinds of research that have been done and ending with limitations or gaps in the research that you intend to address. Finally, the research paper introduction clarifies how your own research fits in and what problem it addresses. If your research involved testing hypotheses, these should be stated along with your research question. The hypothesis should be presented in the past tense since it will have been tested by the time you are writing the research paper introduction.

The following key points, with examples, can guide you when writing the research paper introduction section:

• Highlight the importance of the research field or topic
• Describe the background of the topic
• Present an overview of current research on the topic

Example: The inclusion of experiential and competency-based learning has benefitted electronics engineering education. Industry partnerships provide an excellent alternative for students wanting to engage in solving real-world challenges. Industry-academia participation has grown in recent years due to the need for skilled engineers with practical training and specialized expertise. However, from the educational perspective, many activities are needed to incorporate sustainable development goals into the university curricula and consolidate learning innovation in universities.

• Reveal a gap in existing research or oppose an existing assumption
• Formulate the research question

Example: There have been plausible efforts to integrate educational activities in higher education electronics engineering programs. However, very few studies have considered using educational research methods for performance evaluation of competency-based higher engineering education, with a focus on technical and or transversal skills. To remedy the current need for evaluating competencies in STEM fields and providing sustainable development goals in engineering education, in this study, a comparison was drawn between study groups without and with industry partners.

• State the purpose of your study
• Highlight the key characteristics of your study
• Describe important results
• Highlight the novelty of the study.
• Offer a brief overview of the structure of the paper.

Example: The study evaluates the main competency needed in the applied electronics course, which is a fundamental core subject for many electronics engineering undergraduate programs. We compared two groups, without and with an industrial partner, that offered real-world projects to solve during the semester. This comparison can help determine significant differences in both groups in terms of developing subject competency and achieving sustainable development goals.

Write a Research Paper Introduction in Minutes with Paperpal

Paperpal Copilot is a generative AI-powered academic writing assistant. It’s trained on millions of published scholarly articles and over 20 years of STM experience. Paperpal Copilot helps authors write better and faster with:

• Real-time writing suggestions
• In-depth checks for language and grammar correction
• Paraphrasing to add variety, ensure academic tone, and trim text to meet journal limits

With Paperpal Copilot, create a research paper introduction effortlessly. In this step-by-step guide, we’ll walk you through how Paperpal transforms your initial ideas into a polished and publication-ready introduction.

How to use Paperpal to write the Introduction section

Step 1: Sign up on Paperpal and click on the Copilot feature, under this choose Outlines > Research Article > Introduction

Step 2: Add your unstructured notes or initial draft, whether in English or another language, to Paperpal, which is to be used as the base for your content.

Step 3: Fill in the specifics, such as your field of study, brief description or details you want to include, which will help the AI generate the outline for your Introduction.

Step 4: Use this outline and sentence suggestions to develop your content, adding citations where needed and modifying it to align with your specific research focus.

Step 5: Turn to Paperpal’s granular language checks to refine your content, tailor it to reflect your personal writing style, and ensure it effectively conveys your message.

You can use the same process to develop each section of your article, and finally your research paper in half the time and without any of the stress.

The purpose of the research paper introduction is to introduce the reader to the problem definition, justify the need for the study, and describe the main theme of the study. The aim is to gain the reader’s attention by providing them with necessary background information and establishing the main purpose and direction of the research.

The length of the research paper introduction can vary across journals and disciplines. While there are no strict word limits for writing the research paper introduction, an ideal length would be one page, with a maximum of 400 words over 1-4 paragraphs. Generally, it is one of the shorter sections of the paper as the reader is assumed to have at least a reasonable knowledge about the topic. 2 For example, for a study evaluating the role of building design in ensuring fire safety, there is no need to discuss definitions and nature of fire in the introduction; you could start by commenting upon the existing practices for fire safety and how your study will add to the existing knowledge and practice.

When deciding what to include in the research paper introduction, the rest of the paper should also be considered. The aim is to introduce the reader smoothly to the topic and facilitate an easy read without much dependency on external sources. 3 Below is a list of elements you can include to prepare a research paper introduction outline and follow it when you are writing the research paper introduction. Topic introduction: This can include key definitions and a brief history of the topic. Research context and background: Offer the readers some general information and then narrow it down to specific aspects. Details of the research you conducted: A brief literature review can be included to support your arguments or line of thought. Rationale for the study: This establishes the relevance of your study and establishes its importance. Importance of your research: The main contributions are highlighted to help establish the novelty of your study Research hypothesis: Introduce your research question and propose an expected outcome. Organization of the paper: Include a short paragraph of 3-4 sentences that highlights your plan for the entire paper

Cite only works that are most relevant to your topic; as a general rule, you can include one to three. Note that readers want to see evidence of original thinking. So it is better to avoid using too many references as it does not leave much room for your personal standpoint to shine through. Citations in your research paper introduction support the key points, and the number of citations depend on the subject matter and the point discussed. If the research paper introduction is too long or overflowing with citations, it is better to cite a few review articles rather than the individual articles summarized in the review. A good point to remember when citing research papers in the introduction section is to include at least one-third of the references in the introduction.

The literature review plays a significant role in the research paper introduction section. A good literature review accomplishes the following: Introduces the topic – Establishes the study’s significance – Provides an overview of the relevant literature – Provides context for the study using literature – Identifies knowledge gaps However, remember to avoid making the following mistakes when writing a research paper introduction: Do not use studies from the literature review to aggressively support your research Avoid direct quoting Do not allow literature review to be the focus of this section. Instead, the literature review should only aid in setting a foundation for the manuscript.

Remember the following key points for writing a good research paper introduction: 4

• Avoid stuffing too much general information: Avoid including what an average reader would know and include only that information related to the problem being addressed in the research paper introduction. For example, when describing a comparative study of non-traditional methods for mechanical design optimization, information related to the traditional methods and differences between traditional and non-traditional methods would not be relevant. In this case, the introduction for the research paper should begin with the state-of-the-art non-traditional methods and methods to evaluate the efficiency of newly developed algorithms.
• Avoid packing too many references: Cite only the required works in your research paper introduction. The other works can be included in the discussion section to strengthen your findings.
• Avoid extensive criticism of previous studies: Avoid being overly critical of earlier studies while setting the rationale for your study. A better place for this would be the Discussion section, where you can highlight the advantages of your method.
• Avoid describing conclusions of the study: When writing a research paper introduction remember not to include the findings of your study. The aim is to let the readers know what question is being answered. The actual answer should only be given in the Results and Discussion section.

To summarize, the research paper introduction section should be brief yet informative. It should convince the reader the need to conduct the study and motivate him to read further. If you’re feeling stuck or unsure, choose trusted AI academic writing assistants like Paperpal to effortlessly craft your research paper introduction and other sections of your research article.

1. Jawaid, S. A., & Jawaid, M. (2019). How to write introduction and discussion. Saudi Journal of Anaesthesia, 13(Suppl 1), S18.

2. Dewan, P., & Gupta, P. (2016). Writing the title, abstract and introduction: Looks matter!. Indian pediatrics, 53, 235-241.

3. Cetin, S., & Hackam, D. J. (2005). An approach to the writing of a scientific Manuscript1. Journal of Surgical Research, 128(2), 165-167.

4. Bavdekar, S. B. (2015). Writing introduction: Laying the foundations of a research paper. Journal of the Association of Physicians of India, 63(7), 44-6.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• Scientific Writing Style Guides Explained
• 5 Reasons for Rejection After Peer Review
• Ethical Research Practices For Research with Human Subjects
• 8 Most Effective Ways to Increase Motivation for Thesis Writing 

Practice vs. Practise: Learn the Difference

Academic paraphrasing: why paperpal’s rewrite should be your first choice , you may also like, measuring academic success: definition & strategies for excellence, phd qualifying exam: tips for success , ai in education: it’s time to change the..., is it ethical to use ai-generated abstracts without..., what are journal guidelines on using generative ai..., quillbot review: features, pricing, and free alternatives, what is an academic paper types and elements , should you use ai tools like chatgpt for..., 9 steps to publish a research paper, what are the different types of research papers.

Chapter 3: Writing the Introduction Section

Chapter 3 Synopsis: Writing Introductions

We have now reviewed the three communicative goals and a variety of strategies that you can use to help write the Introduction section of a research article. The image below provides a snapshot of this chapter:

Key Takeaways

There are 3 goals for Introduction sections:

•  E stablish a Knowledge Territory: Demonstrate what you know and what has already been established in the field while holding the attention of the reader so that they are interested enough to keep reading.
• Identify a Niche: Point out exactly what is the problem or gap in the literature, which sets the reader up for the third and final communicative goal of an Introduction.
• Address the Niche: Justify the research without being formulaic; as a writer, you have the freedom to present your research in whatever way you feel best accomplishes these communicative goals.

We’ll now move on to the next section of a research article: The Methods.

Other resources:

The literature review section of the research article is commonly included in the Introduction section and regularly follows the outlined goals and strategies prominent in published Introductions. The literature review is a complicated component of the research article and requires a comprehensive synthesis of relevant research; this critique can serve as a means for authors to expose the need for the current research project based on insufficient, contradicting, or problematic findings from the past. Read more about techniques for writing a literature review from these two web resources:

• Williams College

Explore + Apply

Before you begin applying what you’ve learned in this chapter to your Introduction section, explore published writing in your discipline or in a target journal that you’ve identified. Look for the goals and strategies presented here to see where you might find similarities and differences that are discipline- or journal-specific.

Preparing to Publish Copyright © 2023 by Sarah Huffman; Elena Cotos; and Kimberly Becker is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

• Privacy Policy

Home » Research Paper Introduction – Writing Guide and Examples

Research Paper Introduction – Writing Guide and Examples

Table of Contents

Research Paper Introduction

Research paper introduction is the first section of a research paper that provides an overview of the study, its purpose, and the research question (s) or hypothesis (es) being investigated. It typically includes background information about the topic, a review of previous research in the field, and a statement of the research objectives. The introduction is intended to provide the reader with a clear understanding of the research problem, why it is important, and how the study will contribute to existing knowledge in the field. It also sets the tone for the rest of the paper and helps to establish the author’s credibility and expertise on the subject.

How to Write Research Paper Introduction

Writing an introduction for a research paper can be challenging because it sets the tone for the entire paper. Here are some steps to follow to help you write an effective research paper introduction:

• Start with a hook : Begin your introduction with an attention-grabbing statement, a question, or a surprising fact that will make the reader interested in reading further.
• Provide background information: After the hook, provide background information on the topic. This information should give the reader a general idea of what the topic is about and why it is important.
• State the research problem: Clearly state the research problem or question that the paper addresses. This should be done in a concise and straightforward manner.
• State the research objectives: After stating the research problem, clearly state the research objectives. This will give the reader an idea of what the paper aims to achieve.
• Provide a brief overview of the paper: At the end of the introduction, provide a brief overview of the paper. This should include a summary of the main points that will be discussed in the paper.
• Revise and refine: Finally, revise and refine your introduction to ensure that it is clear, concise, and engaging.

Structure of Research Paper Introduction

The following is a typical structure for a research paper introduction:

• Background Information: This section provides an overview of the topic of the research paper, including relevant background information and any previous research that has been done on the topic. It helps to give the reader a sense of the context for the study.
• Problem Statement: This section identifies the specific problem or issue that the research paper is addressing. It should be clear and concise, and it should articulate the gap in knowledge that the study aims to fill.
• Research Question/Hypothesis : This section states the research question or hypothesis that the study aims to answer. It should be specific and focused, and it should clearly connect to the problem statement.
• Significance of the Study: This section explains why the research is important and what the potential implications of the study are. It should highlight the contribution that the research makes to the field.
• Methodology: This section describes the research methods that were used to conduct the study. It should be detailed enough to allow the reader to understand how the study was conducted and to evaluate the validity of the results.
• Organization of the Paper : This section provides a brief overview of the structure of the research paper. It should give the reader a sense of what to expect in each section of the paper.

Research Paper Introduction Examples

Research Paper Introduction Examples could be:

Example 1: In recent years, the use of artificial intelligence (AI) has become increasingly prevalent in various industries, including healthcare. AI algorithms are being developed to assist with medical diagnoses, treatment recommendations, and patient monitoring. However, as the use of AI in healthcare grows, ethical concerns regarding privacy, bias, and accountability have emerged. This paper aims to explore the ethical implications of AI in healthcare and propose recommendations for addressing these concerns.

Example 2: Climate change is one of the most pressing issues facing our planet today. The increasing concentration of greenhouse gases in the atmosphere has resulted in rising temperatures, changing weather patterns, and other environmental impacts. In this paper, we will review the scientific evidence on climate change, discuss the potential consequences of inaction, and propose solutions for mitigating its effects.

Example 3: The rise of social media has transformed the way we communicate and interact with each other. While social media platforms offer many benefits, including increased connectivity and access to information, they also present numerous challenges. In this paper, we will examine the impact of social media on mental health, privacy, and democracy, and propose solutions for addressing these issues.

Example 4: The use of renewable energy sources has become increasingly important in the face of climate change and environmental degradation. While renewable energy technologies offer many benefits, including reduced greenhouse gas emissions and energy independence, they also present numerous challenges. In this paper, we will assess the current state of renewable energy technology, discuss the economic and political barriers to its adoption, and propose solutions for promoting the widespread use of renewable energy.

Purpose of Research Paper Introduction

The introduction section of a research paper serves several important purposes, including:

• Providing context: The introduction should give readers a general understanding of the topic, including its background, significance, and relevance to the field.
• Presenting the research question or problem: The introduction should clearly state the research question or problem that the paper aims to address. This helps readers understand the purpose of the study and what the author hopes to accomplish.
• Reviewing the literature: The introduction should summarize the current state of knowledge on the topic, highlighting the gaps and limitations in existing research. This shows readers why the study is important and necessary.
• Outlining the scope and objectives of the study: The introduction should describe the scope and objectives of the study, including what aspects of the topic will be covered, what data will be collected, and what methods will be used.
• Previewing the main findings and conclusions : The introduction should provide a brief overview of the main findings and conclusions that the study will present. This helps readers anticipate what they can expect to learn from the paper.

When to Write Research Paper Introduction

The introduction of a research paper is typically written after the research has been conducted and the data has been analyzed. This is because the introduction should provide an overview of the research problem, the purpose of the study, and the research questions or hypotheses that will be investigated.

Once you have a clear understanding of the research problem and the questions that you want to explore, you can begin to write the introduction. It’s important to keep in mind that the introduction should be written in a way that engages the reader and provides a clear rationale for the study. It should also provide context for the research by reviewing relevant literature and explaining how the study fits into the larger field of research.

Advantages of Research Paper Introduction

The introduction of a research paper has several advantages, including:

• Establishing the purpose of the research: The introduction provides an overview of the research problem, question, or hypothesis, and the objectives of the study. This helps to clarify the purpose of the research and provide a roadmap for the reader to follow.
• Providing background information: The introduction also provides background information on the topic, including a review of relevant literature and research. This helps the reader understand the context of the study and how it fits into the broader field of research.
• Demonstrating the significance of the research: The introduction also explains why the research is important and relevant. This helps the reader understand the value of the study and why it is worth reading.
• Setting expectations: The introduction sets the tone for the rest of the paper and prepares the reader for what is to come. This helps the reader understand what to expect and how to approach the paper.
• Grabbing the reader’s attention: A well-written introduction can grab the reader’s attention and make them interested in reading further. This is important because it can help to keep the reader engaged and motivated to read the rest of the paper.
• Creating a strong first impression: The introduction is the first part of the research paper that the reader will see, and it can create a strong first impression. A well-written introduction can make the reader more likely to take the research seriously and view it as credible.
• Establishing the author’s credibility: The introduction can also establish the author’s credibility as a researcher. By providing a clear and thorough overview of the research problem and relevant literature, the author can demonstrate their expertise and knowledge in the field.
• Providing a structure for the paper: The introduction can also provide a structure for the rest of the paper. By outlining the main sections and sub-sections of the paper, the introduction can help the reader navigate the paper and find the information they are looking for.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

How to Cite Research Paper – All Formats and...

Delimitations in Research – Types, Examples and...

Research Paper Format – Types, Examples and...

Research Design – Types, Methods and Examples

Research Paper Title – Writing Guide and Example

Research Paper Conclusion – Writing Guide and...

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 4. The Introduction
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

The introduction leads the reader from a general subject area to a particular topic of inquiry. It establishes the scope, context, and significance of the research being conducted by summarizing current understanding and background information about the topic, stating the purpose of the work in the form of the research problem supported by a hypothesis or a set of questions, explaining briefly the methodological approach used to examine the research problem, highlighting the potential outcomes your study can reveal, and outlining the remaining structure and organization of the paper.

Key Elements of the Research Proposal. Prepared under the direction of the Superintendent and by the 2010 Curriculum Design and Writing Team. Baltimore County Public Schools.

Importance of a Good Introduction

Think of the introduction as a mental road map that must answer for the reader these four questions:

• What was I studying?
• Why was this topic important to investigate?
• What did we know about this topic before I did this study?
• How will this study advance new knowledge or new ways of understanding?

According to Reyes, there are three overarching goals of a good introduction: 1) ensure that you summarize prior studies about the topic in a manner that lays a foundation for understanding the research problem; 2) explain how your study specifically addresses gaps in the literature, insufficient consideration of the topic, or other deficiency in the literature; and, 3) note the broader theoretical, empirical, and/or policy contributions and implications of your research.

A well-written introduction is important because, quite simply, you never get a second chance to make a good first impression. The opening paragraphs of your paper will provide your readers with their initial impressions about the logic of your argument, your writing style, the overall quality of your research, and, ultimately, the validity of your findings and conclusions. A vague, disorganized, or error-filled introduction will create a negative impression, whereas, a concise, engaging, and well-written introduction will lead your readers to think highly of your analytical skills, your writing style, and your research approach. All introductions should conclude with a brief paragraph that describes the organization of the rest of the paper.

Hirano, Eliana. “Research Article Introductions in English for Specific Purposes: A Comparison between Brazilian, Portuguese, and English.” English for Specific Purposes 28 (October 2009): 240-250; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Introductions. The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide. Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Reyes, Victoria. Demystifying the Journal Article. Inside Higher Education.

Structure and Writing Style

I.  Structure and Approach

The introduction is the broad beginning of the paper that answers three important questions for the reader:

• What is this?
• Why should I read it?
• What do you want me to think about / consider doing / react to?

Think of the structure of the introduction as an inverted triangle of information that lays a foundation for understanding the research problem. Organize the information so as to present the more general aspects of the topic early in the introduction, then narrow your analysis to more specific topical information that provides context, finally arriving at your research problem and the rationale for studying it [often written as a series of key questions to be addressed or framed as a hypothesis or set of assumptions to be tested] and, whenever possible, a description of the potential outcomes your study can reveal.

These are general phases associated with writing an introduction: 1.  Establish an area to research by:

• Highlighting the importance of the topic, and/or
• Making general statements about the topic, and/or
• Presenting an overview on current research on the subject.

2.  Identify a research niche by:

• Opposing an existing assumption, and/or
• Revealing a gap in existing research, and/or
• Formulating a research question or problem, and/or
• Continuing a disciplinary tradition.

3.  Place your research within the research niche by:

• Stating the intent of your study,
• Outlining the key characteristics of your study,
• Describing important results, and
• Giving a brief overview of the structure of the paper.

NOTE:   It is often useful to review the introduction late in the writing process. This is appropriate because outcomes are unknown until you've completed the study. After you complete writing the body of the paper, go back and review introductory descriptions of the structure of the paper, the method of data gathering, the reporting and analysis of results, and the conclusion. Reviewing and, if necessary, rewriting the introduction ensures that it correctly matches the overall structure of your final paper.

II.  Delimitations of the Study

Delimitations refer to those characteristics that limit the scope and define the conceptual boundaries of your research . This is determined by the conscious exclusionary and inclusionary decisions you make about how to investigate the research problem. In other words, not only should you tell the reader what it is you are studying and why, but you must also acknowledge why you rejected alternative approaches that could have been used to examine the topic.

Obviously, the first limiting step was the choice of research problem itself. However, implicit are other, related problems that could have been chosen but were rejected. These should be noted in the conclusion of your introduction. For example, a delimitating statement could read, "Although many factors can be understood to impact the likelihood young people will vote, this study will focus on socioeconomic factors related to the need to work full-time while in school." The point is not to document every possible delimiting factor, but to highlight why previously researched issues related to the topic were not addressed.

Examples of delimitating choices would be:

• The key aims and objectives of your study,
• The research questions that you address,
• The variables of interest [i.e., the various factors and features of the phenomenon being studied],
• The method(s) of investigation,
• The time period your study covers, and
• Any relevant alternative theoretical frameworks that could have been adopted.

Review each of these decisions. Not only do you clearly establish what you intend to accomplish in your research, but you should also include a declaration of what the study does not intend to cover. In the latter case, your exclusionary decisions should be based upon criteria understood as, "not interesting"; "not directly relevant"; “too problematic because..."; "not feasible," and the like. Make this reasoning explicit!

NOTE:   Delimitations refer to the initial choices made about the broader, overall design of your study and should not be confused with documenting the limitations of your study discovered after the research has been completed.

ANOTHER NOTE : Do not view delimitating statements as admitting to an inherent failing or shortcoming in your research. They are an accepted element of academic writing intended to keep the reader focused on the research problem by explicitly defining the conceptual boundaries and scope of your study. It addresses any critical questions in the reader's mind of, "Why the hell didn't the author examine this?"

III.  The Narrative Flow

Issues to keep in mind that will help the narrative flow in your introduction :

• Your introduction should clearly identify the subject area of interest . A simple strategy to follow is to use key words from your title in the first few sentences of the introduction. This will help focus the introduction on the topic at the appropriate level and ensures that you get to the subject matter quickly without losing focus, or discussing information that is too general.
• Establish context by providing a brief and balanced review of the pertinent published literature that is available on the subject. The key is to summarize for the reader what is known about the specific research problem before you did your analysis. This part of your introduction should not represent a comprehensive literature review--that comes next. It consists of a general review of the important, foundational research literature [with citations] that establishes a foundation for understanding key elements of the research problem. See the drop-down menu under this tab for " Background Information " regarding types of contexts.
• Clearly state the hypothesis that you investigated . When you are first learning to write in this format it is okay, and actually preferable, to use a past statement like, "The purpose of this study was to...." or "We investigated three possible mechanisms to explain the...."
• Why did you choose this kind of research study or design? Provide a clear statement of the rationale for your approach to the problem studied. This will usually follow your statement of purpose in the last paragraph of the introduction.

IV.  Engaging the Reader

A research problem in the social sciences can come across as dry and uninteresting to anyone unfamiliar with the topic . Therefore, one of the goals of your introduction is to make readers want to read your paper. Here are several strategies you can use to grab the reader's attention:

• Open with a compelling story . Almost all research problems in the social sciences, no matter how obscure or esoteric , are really about the lives of people. Telling a story that humanizes an issue can help illuminate the significance of the problem and help the reader empathize with those affected by the condition being studied.
• Include a strong quotation or a vivid, perhaps unexpected, anecdote . During your review of the literature, make note of any quotes or anecdotes that grab your attention because they can used in your introduction to highlight the research problem in a captivating way.
• Pose a provocative or thought-provoking question . Your research problem should be framed by a set of questions to be addressed or hypotheses to be tested. However, a provocative question can be presented in the beginning of your introduction that challenges an existing assumption or compels the reader to consider an alternative viewpoint that helps establish the significance of your study. 
• Describe a puzzling scenario or incongruity . This involves highlighting an interesting quandary concerning the research problem or describing contradictory findings from prior studies about a topic. Posing what is essentially an unresolved intellectual riddle about the problem can engage the reader's interest in the study.
• Cite a stirring example or case study that illustrates why the research problem is important . Draw upon the findings of others to demonstrate the significance of the problem and to describe how your study builds upon or offers alternatives ways of investigating this prior research.

NOTE:   It is important that you choose only one of the suggested strategies for engaging your readers. This avoids giving an impression that your paper is more flash than substance and does not distract from the substance of your study.

Freedman, Leora  and Jerry Plotnick. Introductions and Conclusions. University College Writing Centre. University of Toronto; Introduction. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Introductions. The Writing Center. University of North Carolina; Introductions. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Introductions, Body Paragraphs, and Conclusions for an Argument Paper. The Writing Lab and The OWL. Purdue University; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Resources for Writers: Introduction Strategies. Program in Writing and Humanistic Studies. Massachusetts Institute of Technology; Sharpling, Gerald. Writing an Introduction. Centre for Applied Linguistics, University of Warwick; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Swales, John and Christine B. Feak. Academic Writing for Graduate Students: Essential Skills and Tasks . 2nd edition. Ann Arbor, MI: University of Michigan Press, 2004 ; Writing Your Introduction. Department of English Writing Guide. George Mason University.

Writing Tip

Avoid the "Dictionary" Introduction

Giving the dictionary definition of words related to the research problem may appear appropriate because it is important to define specific terminology that readers may be unfamiliar with. However, anyone can look a word up in the dictionary and a general dictionary is not a particularly authoritative source because it doesn't take into account the context of your topic and doesn't offer particularly detailed information. Also, placed in the context of a particular discipline, a term or concept may have a different meaning than what is found in a general dictionary. If you feel that you must seek out an authoritative definition, use a subject specific dictionary or encyclopedia [e.g., if you are a sociology student, search for dictionaries of sociology]. A good database for obtaining definitive definitions of concepts or terms is Credo Reference .

Saba, Robert. The College Research Paper. Florida International University; Introductions. The Writing Center. University of North Carolina.

Another Writing Tip

When Do I Begin?

A common question asked at the start of any paper is, "Where should I begin?" An equally important question to ask yourself is, "When do I begin?" Research problems in the social sciences rarely rest in isolation from history. Therefore, it is important to lay a foundation for understanding the historical context underpinning the research problem. However, this information should be brief and succinct and begin at a point in time that illustrates the study's overall importance. For example, a study that investigates coffee cultivation and export in West Africa as a key stimulus for local economic growth needs to describe the beginning of exporting coffee in the region and establishing why economic growth is important. You do not need to give a long historical explanation about coffee exports in Africa. If a research problem requires a substantial exploration of the historical context, do this in the literature review section. In your introduction, make note of this as part of the "roadmap" [see below] that you use to describe the organization of your paper.

Introductions. The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70.

Yet Another Writing Tip

Always End with a Roadmap

The final paragraph or sentences of your introduction should forecast your main arguments and conclusions and provide a brief description of the rest of the paper [the "roadmap"] that let's the reader know where you are going and what to expect. A roadmap is important because it helps the reader place the research problem within the context of their own perspectives about the topic. In addition, concluding your introduction with an explicit roadmap tells the reader that you have a clear understanding of the structural purpose of your paper. In this way, the roadmap acts as a type of promise to yourself and to your readers that you will follow a consistent and coherent approach to addressing the topic of inquiry. Refer to it often to help keep your writing focused and organized.

Cassuto, Leonard. “On the Dissertation: How to Write the Introduction.” The Chronicle of Higher Education , May 28, 2018; Radich, Michael. A Student's Guide to Writing in East Asian Studies . (Cambridge, MA: Harvard University Writing n. d.), pp. 35-37.

• << Previous: Executive Summary
• Next: The C.A.R.S. Model >>
• Last Updated: Apr 24, 2024 10:51 AM
• URL: https://libguides.usc.edu/writingguide

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

How To Write A Research Summary

It’s a common perception that writing a research summary is a quick and easy task. After all, how hard can jotting down 300 words be? But when you consider the weight those 300 words carry, writing a research summary as a part of your dissertation, essay or compelling draft for your paper instantly becomes daunting task.

A research summary requires you to synthesize a complex research paper into an informative, self-explanatory snapshot. It needs to portray what your article contains. Thus, writing it often comes at the end of the task list.

Regardless of when you’re planning to write, it is no less of a challenge, particularly if you’re doing it for the first time. This blog will take you through everything you need to know about research summary so that you have an easier time with it.

What is a Research Summary?

A research summary is the part of your research paper that describes its findings to the audience in a brief yet concise manner. A well-curated research summary represents you and your knowledge about the information written in the research paper.

While writing a quality research summary, you need to discover and identify the significant points in the research and condense it in a more straightforward form. A research summary is like a doorway that provides access to the structure of a research paper's sections.

Since the purpose of a summary is to give an overview of the topic, methodology, and conclusions employed in a paper, it requires an objective approach. No analysis or criticism.

Research summary or Abstract. What’s the Difference?

They’re both brief, concise, and give an overview of an aspect of the research paper. So, it’s easy to understand why many new researchers get the two confused. However, a research summary and abstract are two very different things with individual purpose. To start with, a research summary is written at the end while the abstract comes at the beginning of a research paper.

A research summary captures the essence of the paper at the end of your document. It focuses on your topic, methods, and findings. More like a TL;DR, if you will. An abstract, on the other hand, is a description of what your research paper is about. It tells your reader what your topic or hypothesis is, and sets a context around why you have embarked on your research.

Getting Started with a Research Summary

Before you start writing, you need to get insights into your research’s content, style, and organization. There are three fundamental areas of a research summary that you should focus on.

• While deciding the contents of your research summary, you must include a section on its importance as a whole, the techniques, and the tools that were used to formulate the conclusion. Additionally, there needs to be a short but thorough explanation of how the findings of the research paper have a significance.
• To keep the summary well-organized, try to cover the various sections of the research paper in separate paragraphs. Besides, how the idea of particular factual research came up first must be explained in a separate paragraph.
• As a general practice worldwide, research summaries are restricted to 300-400 words. However, if you have chosen a lengthy research paper, try not to exceed the word limit of 10% of the entire research paper.

How to Structure Your Research Summary

The research summary is nothing but a concise form of the entire research paper. Therefore, the structure of a summary stays the same as the paper. So, include all the section titles and write a little about them. The structural elements that a research summary must consist of are:

It represents the topic of the research. Try to phrase it so that it includes the key findings or conclusion of the task.

The abstract gives a context of the research paper. Unlike the abstract at the beginning of a paper, the abstract here, should be very short since you’ll be working with a limited word count.

Introduction

This is the most crucial section of a research summary as it helps readers get familiarized with the topic. You should include the definition of your topic, the current state of the investigation, and practical relevance in this part. Additionally, you should present the problem statement, investigative measures, and any hypothesis in this section.

Methodology

This section provides details about the methodology and the methods adopted to conduct the study. You should write a brief description of the surveys, sampling, type of experiments, statistical analysis, and the rationality behind choosing those particular methods.

Create a list of evidence obtained from the various experiments with a primary analysis, conclusions, and interpretations made upon that. In the paper research paper, you will find the results section as the most detailed and lengthy part. Therefore, you must pick up the key elements and wisely decide which elements are worth including and which are worth skipping.

This is where you present the interpretation of results in the context of their application. Discussion usually covers results, inferences, and theoretical models explaining the obtained values, key strengths, and limitations. All of these are vital elements that you must include in the summary.

Most research papers merge conclusion with discussions. However, depending upon the instructions, you may have to prepare this as a separate section in your research summary. Usually, conclusion revisits the hypothesis and provides the details about the validation or denial about the arguments made in the research paper, based upon how convincing the results were obtained.

The structure of a research summary closely resembles the anatomy of a scholarly article . Additionally, you should keep your research and references limited to authentic and  scholarly sources only.

Tips for Writing a Research Summary

The core concept behind undertaking a research summary is to present a simple and clear understanding of your research paper to the reader. The biggest hurdle while doing that is the number of words you have at your disposal. So, follow the steps below to write a research summary that sticks.

1. Read the parent paper thoroughly

You should go through the research paper thoroughly multiple times to ensure that you have a complete understanding of its contents. A 3-stage reading process helps.

a. Scan: In the first read, go through it to get an understanding of its basic concept and methodologies.

b. Read: For the second step, read the article attentively by going through each section, highlighting the key elements, and subsequently listing the topics that you will include in your research summary.

c. Skim: Flip through the article a few more times to study the interpretation of various experimental results, statistical analysis, and application in different contexts.

Sincerely go through different headings and subheadings as it will allow you to understand the underlying concept of each section. You can try reading the introduction and conclusion simultaneously to understand the motive of the task and how obtained results stay fit to the expected outcome.

2. Identify the key elements in different sections

While exploring different sections of an article, you can try finding answers to simple what, why, and how. Below are a few pointers to give you an idea:

• What is the research question and how is it addressed?
• Is there a hypothesis in the introductory part?
• What type of methods are being adopted?
• What is the sample size for data collection and how is it being analyzed?
• What are the most vital findings?
• Do the results support the hypothesis?

Discussion/Conclusion

• What is the final solution to the problem statement?
• What is the explanation for the obtained results?
• What is the drawn inference?
• What are the various limitations of the study?

3. Prepare the first draft

Now that you’ve listed the key points that the paper tries to demonstrate, you can start writing the summary following the standard structure of a research summary. Just make sure you’re not writing statements from the parent research paper verbatim.

Instead, try writing down each section in your own words. This will not only help in avoiding plagiarism but will also show your complete understanding of the subject. Alternatively, you can use a summarizing tool (AI-based summary generators) to shorten the content or summarize the content without disrupting the actual meaning of the article.

SciSpace Copilot is one such helpful feature! You can easily upload your research paper and ask Copilot to summarize it. You will get an AI-generated, condensed research summary. SciSpace Copilot also enables you to highlight text, clip math and tables, and ask any question relevant to the research paper; it will give you instant answers with deeper context of the article..

4. Include visuals

One of the best ways to summarize and consolidate a research paper is to provide visuals like graphs, charts, pie diagrams, etc.. Visuals make getting across the facts, the past trends, and the probabilistic figures around a concept much more engaging.

5. Double check for plagiarism

It can be very tempting to copy-paste a few statements or the entire paragraphs depending upon the clarity of those sections. But it’s best to stay away from the practice. Even paraphrasing should be done with utmost care and attention.

Also: QuillBot vs SciSpace: Choose the best AI-paraphrasing tool

6. Religiously follow the word count limit

You need to have strict control while writing different sections of a research summary. In many cases, it has been observed that the research summary and the parent research paper become the same length. If that happens, it can lead to discrediting of your efforts and research summary itself. Whatever the standard word limit has been imposed, you must observe that carefully.

7. Proofread your research summary multiple times

The process of writing the research summary can be exhausting and tiring. However, you shouldn’t allow this to become a reason to skip checking your academic writing several times for mistakes like misspellings, grammar, wordiness, and formatting issues. Proofread and edit until you think your research summary can stand out from the others, provided it is drafted perfectly on both technicality and comprehension parameters. You can also seek assistance from editing and proofreading services , and other free tools that help you keep these annoying grammatical errors at bay.

8. Watch while you write

Keep a keen observation of your writing style. You should use the words very precisely, and in any situation, it should not represent your personal opinions on the topic. You should write the entire research summary in utmost impersonal, precise, factually correct, and evidence-based writing.

9. Ask a friend/colleague to help

Once you are done with the final copy of your research summary, you must ask a friend or colleague to read it. You must test whether your friend or colleague could grasp everything without referring to the parent paper. This will help you in ensuring the clarity of the article.

Once you become familiar with the research paper summary concept and understand how to apply the tips discussed above in your current task, summarizing a research summary won’t be that challenging. While traversing the different stages of your academic career, you will face different scenarios where you may have to create several research summaries.

In such cases, you just need to look for answers to simple questions like “Why this study is necessary,” “what were the methods,” “who were the participants,” “what conclusions were drawn from the research,” and “how it is relevant to the wider world.” Once you find out the answers to these questions, you can easily create a good research summary following the standard structure and a precise writing style.

You might also like

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

How to Write a Great Synopsis for Thesis

A synopsis is a structured outline of a research thesis and the steps followed to answer the research question. The goal of writing a synopsis is to clearly and thoroughly explain the need to investigate a certain problem using particular practical methods to conduct the study. One of the main components of this written work is an extensive literature review containing strong evidence that the proposed research is feasible.

Establishing the Background

A supervisor may ask you to write a synopsis for one or more reasons:

• to help you improve your critical thinking and writing skills
• to help you understand how to design a comprehensive synopsis
• to encourage you to write a comprehensive literature review to make sure that the research problem has not been answered yet
• to make you conduct a logical analysis of the steps that should be followed to meet the objectives of the research

A synopsis should be coherent in terms of research design. Thus, you should ensure that the research problem, aims, and research methods are logically linked and well-considered. Note that all synopses should contain answers for several crucial questions:

• Why should research on the proposed problem be undertaken?
• What is expected to be achieved?
• What has been done by other researchers on the proposed topic?
• How will the objectives of the study be achieved?

The Writing Process

Before proceeding, consider answering the following questions:

• Why am I going to study this topic?
• Why do I consider it to be important?
• Have I conducted an extensive literature review on the topic?
• What problem will the research help to solve?
• How do I incorporate previous studies on the topic?

The structure of a synopsis should correspond to the structure of qualifying research work, and the word count should be 2,500–3,000 words (Balu 38). The basic elements of a synopsis include a title page, contents page, an introduction, background, literature review, objectives, methods, experiments and results, conclusions, and references.

Introduction

As this comprises the first part of the main text, the introduction should convince readers that the study addresses a relevant topic and that the expected outcomes will provide important insights. Also, this section should include a brief description of the methods that will be used to answer the research question. Usually, the introduction is written in 1–3 paragraphs and answers the following questions:

• What is the topic of the research?
• What is the research problem that needs to be meaningfully understood or investigated?
• Why is the problem important?
• How will the problem be studied?

In this section, you should set the scene and better introduce the research topic by proving its scientific legitimacy and relevance. It is important to establish a clear focus and avoid broad generalizations and vague statements. If necessary, you may explain key concepts or terms. Consider covering the following points in this section:

• Discuss how the research will contribute to the existing scientific knowledge.
• Provide a detailed description of the research problem and purpose of the research.
• Provide a rationale for the study.
• Explain how the research question will be answered.
• Be sure to discuss the methods chosen and anticipated implications of the research.

Literature Review

A review of existing literature is an important part of a synopsis, as it:

• gives a more detailed look at scientific information related to the topic
• familiarizes readers with research conducted by others on a similar subject
• gives insight into the difficulties faced by other researchers
• helps identify variables for the research based on similar studies
• helps double-check the feasibility of the research problem.

When writing the literature review, do not simply present a list of methods researchers have used and conclusions they have drawn. It is important to compare and contrast different opinions and be unafraid to criticize some of them. Pay attention to controversial issues and divergent approaches used to address similar problems. You may discuss which arguments are more persuasive and which methods and techniques seem to be more valid and reliable. In this section, you are expected not to summarize but analyze the previous research while remembering to link it to your own purpose.

Identify the objectives of the research based on the literature review. Provide an overall objective related to the scientific contribution of the study to the subject area. Also include a specific objective that can be measured at the end of the research.

When writing this section, consider that the aim of the research is to produce new knowledge regarding the topic chosen. Therefore, the research methodology forms the core of your project, and your goal is to convince readers that the research design and methods chosen will rationally answer the research questions and provide effective tools to interpret the results correctly. It may be appropriate to incorporate some examples from your literature review into the description of the overall research design.

When describing the research methodology, ensure that you specify the approaches and techniques that will be used to answer the research question. In addition, be specific about applying the chosen methods and what you expect to achieve. Keep in mind that the methods section allows readers to evaluate the validity and feasibility of the study. Therefore, be sure to explain your decision to adopt specific methods and procedures. It is also important to discuss the anticipated barriers and limitations of the study and how they will be addressed. Specify what kind of contribution to the existing knowledge on the topic is expected, and discuss any ethical considerations that are relevant to the research.

Experiments and Results

Logically present and analyze the results of the study using tables or figures.

In this section, you should again state the significance of the research and summarize the study. Be sure to mention the study objectives and methods used to answer the research questions. Also, discuss how the results of the study contribute to the current knowledge on the problem.

A synopsis should contain a list of all references used. Make sure the references are formatted according to the chosen citation style and each source presented in this section is mentioned within the body of the synopsis.

The purpose of writing a synopsis is to show a supervisor a clear picture of a proposed project and allow him or her to find any gaps that have not been considered previously. A concisely written synopsis will help you gain approval to proceed with the actual research. While no rigid rules for writing this type of paper have been established, a synopsis should be constructed in a manner to help a supervisor understand the proposed research at first glance.

Balu, R. “Writing a Good Ph.D Research Synopsis.” International Journal of Research in Science and Technology, vol. 5, no. 4, 2015, pp. 38–48.

Unfortunately, your browser is too old to work on this site.

For full functionality of this site it is necessary to enable JavaScript.

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game New
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• College University and Postgraduate
• Academic Writing
• Research Papers

How to Write a Research Introduction

Last Updated: December 6, 2023 Fact Checked

This article was co-authored by Megan Morgan, PhD . Megan Morgan is a Graduate Program Academic Advisor in the School of Public & International Affairs at the University of Georgia. She earned her PhD in English from the University of Georgia in 2015. There are 7 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 2,652,280 times.

The introduction to a research paper can be the most challenging part of the paper to write. The length of the introduction will vary depending on the type of research paper you are writing. An introduction should announce your topic, provide context and a rationale for your work, before stating your research questions and hypothesis. Well-written introductions set the tone for the paper, catch the reader's interest, and communicate the hypothesis or thesis statement.

Introducing the Topic of the Paper

• In scientific papers this is sometimes known as an "inverted triangle", where you start with the broadest material at the start, before zooming in on the specifics. [2] X Research source
• The sentence "Throughout the 20th century, our views of life on other planets have drastically changed" introduces a topic, but does so in broad terms.
• It provides the reader with an indication of the content of the essay and encourages them to read on.

• For example, if you were writing a paper about the behaviour of mice when exposed to a particular substance, you would include the word "mice", and the scientific name of the relevant compound in the first sentences.
• If you were writing a history paper about the impact of the First World War on gender relations in Britain, you should mention those key words in your first few lines.

• This is especially important if you are attempting to develop a new conceptualization that uses language and terminology your readers may be unfamiliar with.

• If you use an anecdote ensure that is short and highly relevant for your research. It has to function in the same way as an alternative opening, namely to announce the topic of your research paper to your reader.
• For example, if you were writing a sociology paper about re-offending rates among young offenders, you could include a brief story of one person whose story reflects and introduces your topic.
• This kind of approach is generally not appropriate for the introduction to a natural or physical sciences research paper where the writing conventions are different.

Establishing the Context for Your Paper

• It is important to be concise in the introduction, so provide an overview on recent developments in the primary research rather than a lengthy discussion.
• You can follow the "inverted triangle" principle to focus in from the broader themes to those to which you are making a direct contribution with your paper.
• A strong literature review presents important background information to your own research and indicates the importance of the field.

• By making clear reference to existing work you can demonstrate explicitly the specific contribution you are making to move the field forward.
• You can identify a gap in the existing scholarship and explain how you are addressing it and moving understanding forward.

• For example, if you are writing a scientific paper you could stress the merits of the experimental approach or models you have used.
• Stress what is novel in your research and the significance of your new approach, but don't give too much detail in the introduction.
• A stated rationale could be something like: "the study evaluates the previously unknown anti-inflammatory effects of a topical compound in order to evaluate its potential clinical uses".

Specifying Your Research Questions and Hypothesis

• The research question or questions generally come towards the end of the introduction, and should be concise and closely focused.
• The research question might recall some of the key words established in the first few sentences and the title of your paper.
• An example of a research question could be "what were the consequences of the North American Free Trade Agreement on the Mexican export economy?"
• This could be honed further to be specific by referring to a particular element of the Free Trade Agreement and the impact on a particular industry in Mexico, such as clothing manufacture.
• A good research question should shape a problem into a testable hypothesis.

• If possible try to avoid using the word "hypothesis" and rather make this implicit in your writing. This can make your writing appear less formulaic.
• In a scientific paper, giving a clear one-sentence overview of your results and their relation to your hypothesis makes the information clear and accessible. [10] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
• An example of a hypothesis could be "mice deprived of food for the duration of the study were expected to become more lethargic than those fed normally".

• This is not always necessary and you should pay attention to the writing conventions in your discipline.
• In a natural sciences paper, for example, there is a fairly rigid structure which you will be following.
• A humanities or social science paper will most likely present more opportunities to deviate in how you structure your paper.

Research Introduction Help

Community Q&A

• Use your research papers' outline to help you decide what information to include when writing an introduction. Thanks Helpful 0 Not Helpful 1
• Consider drafting your introduction after you have already completed the rest of your research paper. Writing introductions last can help ensure that you don't leave out any major points. Thanks Helpful 0 Not Helpful 0

• Avoid emotional or sensational introductions; these can create distrust in the reader. Thanks Helpful 50 Not Helpful 12
• Generally avoid using personal pronouns in your introduction, such as "I," "me," "we," "us," "my," "mine," or "our." Thanks Helpful 31 Not Helpful 7
• Don't overwhelm the reader with an over-abundance of information. Keep the introduction as concise as possible by saving specific details for the body of your paper. Thanks Helpful 24 Not Helpful 14

You Might Also Like

• ↑ https://library.sacredheart.edu/c.php?g=29803&p=185916
• ↑ https://www.aresearchguide.com/inverted-pyramid-structure-in-writing.html
• ↑ https://libguides.usc.edu/writingguide/introduction
• ↑ https://writing.wisc.edu/Handbook/PlanResearchPaper.html
• ↑ https://dept.writing.wisc.edu/wac/writing-an-introduction-for-a-scientific-paper/
• ↑ https://writing.wisc.edu/handbook/assignments/planresearchpaper/
• ↑ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3178846/

About This Article

To introduce your research paper, use the first 1-2 sentences to describe your general topic, such as “women in World War I.” Include and define keywords, such as “gender relations,” to show your reader where you’re going. Mention previous research into the topic with a phrase like, “Others have studied…”, then transition into what your contribution will be and why it’s necessary. Finally, state the questions that your paper will address and propose your “answer” to them as your thesis statement. For more information from our English Ph.D. co-author about how to craft a strong hypothesis and thesis, keep reading! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Abdulrahman Omar

Oct 5, 2018

Did this article help you?

May 9, 2021

Lavanya Gopakumar

Oct 1, 2016

Dengkai Zhang

May 14, 2018

Leslie Mae Cansana

Sep 22, 2016

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Don’t miss out! Sign up for

wikiHow’s newsletter

• Current Students
• News & Press
• Exam Technique for In-Person Exams
• Revising for 24 Hour Take Home Exams
• Introduction to 24 Hour Take Home Exams
• Before the 24 Hour Take Home Exam
• Exam Technique for 24 Hour Take Home Exams
• Structuring a Literature Review
• Writing Coursework under Time Constraints
• Reflective Writing
• Writing a Synopsis
• Structuring a Science Report
• Presentations
• How the University works out your degree award
• Personal Extenuating Circumstances (PEC)
• Accessing your assignment feedback via Canvas
• Inspera Digital Exams
• Writing Introductions and Conclusions
• Paragraphing
• Reporting Verbs
• Signposting
• Proofreading
• Working with a Proofreader
• Writing Concisely
• The 1-Hour Writing Challenge
• Editing strategies
• Apostrophes
• Semi-colons
• Run-on sentences
• How to Improve your Grammar (native English)
• How to Improve your Grammar (non-native English)
• Independent Learning for Online Study
• Reflective Practice
• Academic Reading
• Strategic Reading Framework
• Note-taking Strategies
• Note-taking in Lectures
• Making Notes from Reading
• Using Evidence to Support your Argument
• Integrating Scholarship
• Managing Time and Motivation
• Dealing with Procrastination
• How to Paraphrase
• Quote or Paraphrase?
• How to Quote
• Referencing
• Artificial Intelligence and Academic Integrity
• Use and limitations of generative AI
• Acknowledging use of AI
• Numeracy, Maths & Statistics
• Library Search
• Search Techniques
• Keeping up to date
• Evaluating Information
• Managing Information
• Thinking Critically about AI
• Using Information generated by AI
• Digital Capabilities
• SensusAccess
• Develop Your Digital Skills
• Digital Tools to Help You Study

Learn how to prepare and write a synopsis assignment.

• Newcastle University
• Academic Skills Kit
• Assignment Types

A synopsis is a brief summary which gives readers an overview of the main points. In an academic context, this is usually a summary of a text (a journal article, book, report etc) but in some instances you might be writing a synopsis of a talk, film or other form of presentation. A synopsis is a neutral summary, objectively capturing the main points, rather than your own perspective or critique, and it focusses directly on the text you’re summarising rather than being a wider discussion of a topic, as an essay might be.

A synopsis aims to give the reader a full, if brief, account of the whole text so that they can follow its main points without having to read it themselves. It’s not a ‘trailer’ designed to tempt your audience to read the text itself, so you don’t have to worry about ‘hooking’ them in with hints and high points or ‘spoiling the ending’ - give the whole text equal coverage, including the conclusions. You could add some commentary which gives the reader a bit of context about the text, including the authors and circumstances it was written in (for example, if it is part of a debate, particular school of thought or its significance and what impact it’s had).

Writing a good synopsis is a skill, and there are a number of challenges: 

• Separating the main points from the minor detail
• Knowing what to leave out as well as what to include
• Giving a sense of the overall narrative as well as listing the key points
• Covering the whole text within a small word limit
• Knowing how closely to stick to the original, especially in terms of the wording
• Whether to give all key points equal treatment, or cover some more briefly, even combining them
• Rephrasing things concisely without losing the meaning or misrepresenting it
• Not leaving out anything crucial to understanding the whole overall message

A good synopsis will allow the reader to feel as if they’d skimread the whole text themselves, understanding the overall gist and highlighting what they need to know. A poor synopsis will get bogged down in detail, giving a confused account of the whole story by just listing points, miss out major points or give an inaccurate or one-sided account or stick so closely to the original that it becomes plagiarism without demonstrating a real understanding by the person summarising it.  

How to prepare a synopsis

Boiling down the key points and overall narrative of the original means good reading and note-taking skills which aim to identify and boil down key points to their essence. You could try some of the following approaches: 

• Read the whole text, and afterwards, without re-reading, jot down your first initial summary in 50 words to capture its overall point. You can check it back for accuracy or anything you left out, but stick within ca 50 words
• Read the introduction and first line of each paragraph to get a sense of the overall structure and key points within it
• Highlight one sentence in each paragraph that you think is essential detail to understanding that section
• Alternatively, with a marker pen, cross out anything that isn’t essential to an understanding of the whole section or text 
• Jot down only key words as a summary of each point rather than whole sentences
• Read each paragraph and summarise it without looking, in one sentence of your own 
• Consider how many points you can make within your word count, and reduce or combine your list of summarised points down to this number

You could start small, identifying just keywords or sentences at first and then work them up into phrases, bullet points and sentences as a rough plan or draft, or you could start big with the original text and reduce each section, paragraph and sentence summary again and again until you have boiled it down to its essence.  

When you start to prepare your first plan or draft, try to use your notes or memory and step away from the original as much as you can. You can go back and check it afterwards, but you need to create some distance to be able to create your own account and have confidence in the points you have identified as essential.

Writing a synopsis

The main decisions facing you as you write up your summary are about how closely to stick to the original in terms of structure and style, and how much attention to give to each point. 

• You could begin your synopsis with a brief context, explaining who the authors are, the context and significance of their work, as well as anything you think might help the reader to understand the following summary
• The most common structure is to follow that of the original text, to give a sense of its narrative flow as well as the key points within it. You could choose to depart from it a little though, perhaps glossing over some points faster than others, combining two sections which go together or aren’t enough in their own right, possibly even changing the order a little where it helps to combine two similar points. Careful use of signposting language will help the reader clearly follow the structure (and note anywhere you’ve changed it from the original) so they can identify the bit you’re talking about in the original if they want to
• The style will naturally be strongly influenced by the original wording, but you should phrase it in your own words wherever possible. It’s harder to nibble away words from a much longer original than it is to start again and use your own concise phrasing, and you want to demonstrate your own understanding to the reader. You could use the odd original phrase or quotation here or there, but the synopsis needs to be more than a collage of quotations; it’s a thing in its own right rather than a cut-down version of the original
• You can also show your own response to the text in the way you use language to guide the reader to what you feel are the key points and (briefly) why. Your own voice doesn’t need to be very obvious in the synopsis, as it’s about the text rather than your reaction to it, but you have made analytical decisions about what is important, and might want to explain to the reader why these points are significant in understanding the whole
• What is the main purpose of this text? What did it aim to discover, explain or prove?
• Why was this research done? How significant is it?
• How was the research conducted? What kind of research is it?
• What were the three (or four, five) main things I should be aware of from this paper?
• What is their line of argument?
• What is their overall conclusion, recommendation, finding? Why is that important?

Managing word count

The trick to writing a concise synopsis which keeps within your word limit is not to start from the much bigger original text, but from your own boiled down notes. If you’re over the word count, you could start cutting out words that don’t seem essential, but if you go too far, you end up with a text which does not read well and doesn’t hang together. It might be better to remove whole sentences and perhaps whole points, than nibble away at words here and there.

Download this guide as a PDF

Learn how to prepare and write a synopsis assignment. **PDF Download**

How to Write a Synopsis of an Article: A Step-by-Step Guide

Feeling behind on ai.

You're not alone. The Neuron is a daily AI newsletter that tracks the latest AI trends and tools you need to know. Join 400,000+ professionals from top companies like Microsoft, Apple, Salesforce and more. 100% FREE.

Have you ever been tasked with writing a synopsis of an article and had no idea where to begin? Don't worry, you're not alone. A synopsis is a brief summary of an article, and can be an essential tool when trying to convey the main points of a lengthy piece of writing. In this guide, we'll walk you through the steps of creating a strong synopsis that effectively communicates the article's key takeaways.

Understanding the Purpose of a Synopsis

Before we dive into the specifics of writing a synopsis, it's important to first understand why they are so important. Synopses serve as a quick reference for busy readers who are unable to read the entire article. They also help to clarify the article's purpose and make it easier to analyze the author's arguments.

When it comes to reading articles or research papers, time is of the essence. Many readers are looking for specific information and don't have the luxury of reading an entire article from start to finish. This is where a synopsis comes in handy. It provides a brief overview of the article's main points, allowing readers to quickly determine whether or not the article is worth their time.

Why Synopses are Important

Synopses provide a concise summary of an article's main points, making it easier for readers to quickly grasp the author's intended message. They are also useful for researchers who are looking for specific information, as a synopsis can help them determine whether or not an article is relevant to their needs.

Moreover, synopses are essential for professionals who are constantly on the go. Business executives, for instance, may not have the time to read an entire report, but they need to be informed about the key takeaways. A synopsis provides them with a quick and easy way to get up to speed.

Different Types of Synopses

There are several different types of synopses, each catering to a different audience. For example, an executive summary is a type of synopsis that is aimed at business professionals, while an abstract is a synopsis that is typically used in academic writing. Regardless of the type of synopsis that you are writing, the same basic principles apply.

One type of synopsis that is gaining popularity is the social media synopsis. With the rise of social media, many readers are looking for bite-sized pieces of information that they can easily share with their followers. A social media synopsis provides a concise summary of an article's main points, making it easy for readers to share the information with their network.

In conclusion, synopses are an essential part of effective communication. They provide readers with a quick and easy way to understand an article's main points, making it easier for them to determine whether or not the article is relevant to their needs. By understanding the purpose and importance of synopses, you can create effective summaries that will engage and inform your readers.

Preparing to Write Your Synopsis

Now that we've covered the importance of synopses, let's dive into the steps involved in creating one.

Read the entire article thoroughly

Before you can begin writing your synopsis, you need to thoroughly read the article that you are summarizing. It's important to understand the author's intended message and the supporting arguments that are used to make that message. Take notes as you read, highlighting key points and information that will be useful when writing your synopsis.

Identify the main points and arguments

Once you've read the article, you need to identify the main points and arguments that the author is making. These will typically be found in the introduction and conclusion of the article, but you may also find them throughout the body of the text. It's important to identify all of the main points so that you can ensure that your synopsis accurately represents the author's message.

Take notes and outline the article's structure

In addition to identifying the main points, you should also take notes on the article's structure. This includes identifying subheadings and sections, as well as any transitions or supporting evidence that the author uses. By organizing your notes in this way, you can ensure that your synopsis accurately reflects the structure of the original article.

Writing a Strong Introduction for Your Synopsis

Now that you've prepared for writing your synopsis, it's time to dive into actually writing it. The beginning is a crucial aspect of your synopsis, as it sets the tone for the rest of the summary.

Hook the reader with a compelling opening

Just like a full-length article, the introduction of your synopsis should hook the reader and make them want to continue reading. This can be done by using a surprising statistic, an interesting anecdote, or a thought-provoking quote. Whatever method you choose, make sure that it grabs the reader's attention.

Introduce the article's main topic and purpose

After you've hooked the reader, it's important to provide context for the article. This means introducing the topic and purpose of the original article, as well as the main arguments that the author makes. By providing this information up front, you can ensure that the reader has a basic understanding of the article's message before diving deeper into the details.

Provide context and background information

Finally, it's important to provide context and background information for the article. This may include information on the author, the publication where the article appeared, and any relevant historical or societal context that helps to explain the article's message.

Summarizing the Article's Main Points

Once you've written a strong introduction for your synopsis, it's time to dive into the details. This is where you'll summarize the article's main points in a clear and concise manner.

Be concise and clear

When summarizing the article, it's important to be concise and clear. Use your notes from the article to identify the main points and supporting arguments, and present them in a way that accurately represents the original author's message. Avoid using lengthy quotes or unnecessarily wordy descriptions, as this can detract from the clarity of your summary.

Use your own words

While it's important to accurately represent the author's message, it's also important to use your own words when summarizing the article. This means avoiding copying entire sections of the article word for word, and instead rephrasing the author's arguments in a way that is both accurate and concise.

Maintain the original article's tone and style

Finally, it's important to maintain the tone and style of the original article when writing your synopsis. This means using the same type of language, voice, and style as the author, so that the reader can get a sense of the author's intended message.

ChatGPT Prompt for Writing a Synopsis of an Article

Use the following prompt in an AI chatbot . Below each prompt, be sure to provide additional details about your situation. These could be scratch notes, what you'd like to say or anything else that guides the AI model to write a certain way.

Please compose a concise and thorough summary of a written piece, including all relevant information and main points, in order to provide a clear understanding of the article's content.

[ADD ADDITIONAL CONTEXT. CAN USE BULLET POINTS.]

In conclusion, writing a synopsis of an article may seem like a daunting task, but by following these simple steps, you can create a summary that accurately represents the author's message and purpose. Remember to thoroughly read the article, identify the main points and arguments, and present them in a concise and clear manner. By doing so, you can create a synopsis that effectively communicates the article's key takeaways, and ensures that your readers are able to quickly and easily understand the author's intended message.

You Might Also Like...

How to write a travel article: a step-by-step guide, how to write a winning gofundme page.

Our approach

• Responsibility
• Infrastructure
• Try Meta AI

RECOMMENDED READS

• 5 Steps to Getting Started with Llama 2
• The Llama Ecosystem: Past, Present, and Future
• Introducing Code Llama, a state-of-the-art large language model for coding
• Meta and Microsoft Introduce the Next Generation of Llama
• Today, we’re introducing Meta Llama 3, the next generation of our state-of-the-art open source large language model.
• Llama 3 models will soon be available on AWS, Databricks, Google Cloud, Hugging Face, Kaggle, IBM WatsonX, Microsoft Azure, NVIDIA NIM, and Snowflake, and with support from hardware platforms offered by AMD, AWS, Dell, Intel, NVIDIA, and Qualcomm.
• We’re dedicated to developing Llama 3 in a responsible way, and we’re offering various resources to help others use it responsibly as well. This includes introducing new trust and safety tools with Llama Guard 2, Code Shield, and CyberSec Eval 2.
• In the coming months, we expect to introduce new capabilities, longer context windows, additional model sizes, and enhanced performance, and we’ll share the Llama 3 research paper.
• Meta AI, built with Llama 3 technology, is now one of the world’s leading AI assistants that can boost your intelligence and lighten your load—helping you learn, get things done, create content, and connect to make the most out of every moment. You can try Meta AI here .

Today, we’re excited to share the first two models of the next generation of Llama, Meta Llama 3, available for broad use. This release features pretrained and instruction-fine-tuned language models with 8B and 70B parameters that can support a broad range of use cases. This next generation of Llama demonstrates state-of-the-art performance on a wide range of industry benchmarks and offers new capabilities, including improved reasoning. We believe these are the best open source models of their class, period. In support of our longstanding open approach, we’re putting Llama 3 in the hands of the community. We want to kickstart the next wave of innovation in AI across the stack—from applications to developer tools to evals to inference optimizations and more. We can’t wait to see what you build and look forward to your feedback.

Our goals for Llama 3

With Llama 3, we set out to build the best open models that are on par with the best proprietary models available today. We wanted to address developer feedback to increase the overall helpfulness of Llama 3 and are doing so while continuing to play a leading role on responsible use and deployment of LLMs. We are embracing the open source ethos of releasing early and often to enable the community to get access to these models while they are still in development. The text-based models we are releasing today are the first in the Llama 3 collection of models. Our goal in the near future is to make Llama 3 multilingual and multimodal, have longer context, and continue to improve overall performance across core LLM capabilities such as reasoning and coding.

State-of-the-art performance

Our new 8B and 70B parameter Llama 3 models are a major leap over Llama 2 and establish a new state-of-the-art for LLM models at those scales. Thanks to improvements in pretraining and post-training, our pretrained and instruction-fine-tuned models are the best models existing today at the 8B and 70B parameter scale. Improvements in our post-training procedures substantially reduced false refusal rates, improved alignment, and increased diversity in model responses. We also saw greatly improved capabilities like reasoning, code generation, and instruction following making Llama 3 more steerable.

*Please see evaluation details for setting and parameters with which these evaluations are calculated.

In the development of Llama 3, we looked at model performance on standard benchmarks and also sought to optimize for performance for real-world scenarios. To this end, we developed a new high-quality human evaluation set. This evaluation set contains 1,800 prompts that cover 12 key use cases: asking for advice, brainstorming, classification, closed question answering, coding, creative writing, extraction, inhabiting a character/persona, open question answering, reasoning, rewriting, and summarization. To prevent accidental overfitting of our models on this evaluation set, even our own modeling teams do not have access to it. The chart below shows aggregated results of our human evaluations across of these categories and prompts against Claude Sonnet, Mistral Medium, and GPT-3.5.

Preference rankings by human annotators based on this evaluation set highlight the strong performance of our 70B instruction-following model compared to competing models of comparable size in real-world scenarios.

Our pretrained model also establishes a new state-of-the-art for LLM models at those scales.

To develop a great language model, we believe it’s important to innovate, scale, and optimize for simplicity. We adopted this design philosophy throughout the Llama 3 project with a focus on four key ingredients: the model architecture, the pretraining data, scaling up pretraining, and instruction fine-tuning.

Model architecture

In line with our design philosophy, we opted for a relatively standard decoder-only transformer architecture in Llama 3. Compared to Llama 2, we made several key improvements. Llama 3 uses a tokenizer with a vocabulary of 128K tokens that encodes language much more efficiently, which leads to substantially improved model performance. To improve the inference efficiency of Llama 3 models, we’ve adopted grouped query attention (GQA) across both the 8B and 70B sizes. We trained the models on sequences of 8,192 tokens, using a mask to ensure self-attention does not cross document boundaries.

Training data

To train the best language model, the curation of a large, high-quality training dataset is paramount. In line with our design principles, we invested heavily in pretraining data. Llama 3 is pretrained on over 15T tokens that were all collected from publicly available sources. Our training dataset is seven times larger than that used for Llama 2, and it includes four times more code. To prepare for upcoming multilingual use cases, over 5% of the Llama 3 pretraining dataset consists of high-quality non-English data that covers over 30 languages. However, we do not expect the same level of performance in these languages as in English.

To ensure Llama 3 is trained on data of the highest quality, we developed a series of data-filtering pipelines. These pipelines include using heuristic filters, NSFW filters, semantic deduplication approaches, and text classifiers to predict data quality. We found that previous generations of Llama are surprisingly good at identifying high-quality data, hence we used Llama 2 to generate the training data for the text-quality classifiers that are powering Llama 3.

We also performed extensive experiments to evaluate the best ways of mixing data from different sources in our final pretraining dataset. These experiments enabled us to select a data mix that ensures that Llama 3 performs well across use cases including trivia questions, STEM, coding, historical knowledge, etc.

Scaling up pretraining

To effectively leverage our pretraining data in Llama 3 models, we put substantial effort into scaling up pretraining. Specifically, we have developed a series of detailed scaling laws for downstream benchmark evaluations. These scaling laws enable us to select an optimal data mix and to make informed decisions on how to best use our training compute. Importantly, scaling laws allow us to predict the performance of our largest models on key tasks (for example, code generation as evaluated on the HumanEval benchmark—see above) before we actually train the models. This helps us ensure strong performance of our final models across a variety of use cases and capabilities.

We made several new observations on scaling behavior during the development of Llama 3. For example, while the Chinchilla-optimal amount of training compute for an 8B parameter model corresponds to ~200B tokens, we found that model performance continues to improve even after the model is trained on two orders of magnitude more data. Both our 8B and 70B parameter models continued to improve log-linearly after we trained them on up to 15T tokens. Larger models can match the performance of these smaller models with less training compute, but smaller models are generally preferred because they are much more efficient during inference.

To train our largest Llama 3 models, we combined three types of parallelization: data parallelization, model parallelization, and pipeline parallelization. Our most efficient implementation achieves a compute utilization of over 400 TFLOPS per GPU when trained on 16K GPUs simultaneously. We performed training runs on two custom-built 24K GPU clusters . To maximize GPU uptime, we developed an advanced new training stack that automates error detection, handling, and maintenance. We also greatly improved our hardware reliability and detection mechanisms for silent data corruption, and we developed new scalable storage systems that reduce overheads of checkpointing and rollback. Those improvements resulted in an overall effective training time of more than 95%. Combined, these improvements increased the efficiency of Llama 3 training by ~three times compared to Llama 2.

Instruction fine-tuning

To fully unlock the potential of our pretrained models in chat use cases, we innovated on our approach to instruction-tuning as well. Our approach to post-training is a combination of supervised fine-tuning (SFT), rejection sampling, proximal policy optimization (PPO), and direct preference optimization (DPO). The quality of the prompts that are used in SFT and the preference rankings that are used in PPO and DPO has an outsized influence on the performance of aligned models. Some of our biggest improvements in model quality came from carefully curating this data and performing multiple rounds of quality assurance on annotations provided by human annotators.

Learning from preference rankings via PPO and DPO also greatly improved the performance of Llama 3 on reasoning and coding tasks. We found that if you ask a model a reasoning question that it struggles to answer, the model will sometimes produce the right reasoning trace: The model knows how to produce the right answer, but it does not know how to select it. Training on preference rankings enables the model to learn how to select it.

Building with Llama 3

Our vision is to enable developers to customize Llama 3 to support relevant use cases and to make it easier to adopt best practices and improve the open ecosystem. With this release, we’re providing new trust and safety tools including updated components with both Llama Guard 2 and Cybersec Eval 2, and the introduction of Code Shield—an inference time guardrail for filtering insecure code produced by LLMs.

We’ve also co-developed Llama 3 with torchtune , the new PyTorch-native library for easily authoring, fine-tuning, and experimenting with LLMs. torchtune provides memory efficient and hackable training recipes written entirely in PyTorch. The library is integrated with popular platforms such as Hugging Face, Weights & Biases, and EleutherAI and even supports Executorch for enabling efficient inference to be run on a wide variety of mobile and edge devices. For everything from prompt engineering to using Llama 3 with LangChain we have a comprehensive getting started guide and takes you from downloading Llama 3 all the way to deployment at scale within your generative AI application.

A system-level approach to responsibility

We have designed Llama 3 models to be maximally helpful while ensuring an industry leading approach to responsibly deploying them. To achieve this, we have adopted a new, system-level approach to the responsible development and deployment of Llama. We envision Llama models as part of a broader system that puts the developer in the driver’s seat. Llama models will serve as a foundational piece of a system that developers design with their unique end goals in mind.

Instruction fine-tuning also plays a major role in ensuring the safety of our models. Our instruction-fine-tuned models have been red-teamed (tested) for safety through internal and external efforts. ​​Our red teaming approach leverages human experts and automation methods to generate adversarial prompts that try to elicit problematic responses. For instance, we apply comprehensive testing to assess risks of misuse related to Chemical, Biological, Cyber Security, and other risk areas. All of these efforts are iterative and used to inform safety fine-tuning of the models being released. You can read more about our efforts in the model card .

Llama Guard models are meant to be a foundation for prompt and response safety and can easily be fine-tuned to create a new taxonomy depending on application needs. As a starting point, the new Llama Guard 2 uses the recently announced MLCommons taxonomy, in an effort to support the emergence of industry standards in this important area. Additionally, CyberSecEval 2 expands on its predecessor by adding measures of an LLM’s propensity to allow for abuse of its code interpreter, offensive cybersecurity capabilities, and susceptibility to prompt injection attacks (learn more in our technical paper ). Finally, we’re introducing Code Shield which adds support for inference-time filtering of insecure code produced by LLMs. This offers mitigation of risks around insecure code suggestions, code interpreter abuse prevention, and secure command execution.

With the speed at which the generative AI space is moving, we believe an open approach is an important way to bring the ecosystem together and mitigate these potential harms. As part of that, we’re updating our Responsible Use Guide (RUG) that provides a comprehensive guide to responsible development with LLMs. As we outlined in the RUG, we recommend that all inputs and outputs be checked and filtered in accordance with content guidelines appropriate to the application. Additionally, many cloud service providers offer content moderation APIs and other tools for responsible deployment, and we encourage developers to also consider using these options.

Deploying Llama 3 at scale

Llama 3 will soon be available on all major platforms including cloud providers, model API providers, and much more. Llama 3 will be everywhere .

Our benchmarks show the tokenizer offers improved token efficiency, yielding up to 15% fewer tokens compared to Llama 2. Also, Group Query Attention (GQA) now has been added to Llama 3 8B as well. As a result, we observed that despite the model having 1B more parameters compared to Llama 2 7B, the improved tokenizer efficiency and GQA contribute to maintaining the inference efficiency on par with Llama 2 7B.

For examples of how to leverage all of these capabilities, check out Llama Recipes which contains all of our open source code that can be leveraged for everything from fine-tuning to deployment to model evaluation.

What’s next for Llama 3?

The Llama 3 8B and 70B models mark the beginning of what we plan to release for Llama 3. And there’s a lot more to come.

Our largest models are over 400B parameters and, while these models are still training, our team is excited about how they’re trending. Over the coming months, we’ll release multiple models with new capabilities including multimodality, the ability to converse in multiple languages, a much longer context window, and stronger overall capabilities. We will also publish a detailed research paper once we are done training Llama 3.

To give you a sneak preview for where these models are today as they continue training, we thought we could share some snapshots of how our largest LLM model is trending. Please note that this data is based on an early checkpoint of Llama 3 that is still training and these capabilities are not supported as part of the models released today.

We’re committed to the continued growth and development of an open AI ecosystem for releasing our models responsibly. We have long believed that openness leads to better, safer products, faster innovation, and a healthier overall market. This is good for Meta, and it is good for society. We’re taking a community-first approach with Llama 3, and starting today, these models are available on the leading cloud, hosting, and hardware platforms with many more to come.

Try Meta Llama 3 today

We’ve integrated our latest models into Meta AI, which we believe is the world’s leading AI assistant. It’s now built with Llama 3 technology and it’s available in more countries across our apps.

You can use Meta AI on Facebook, Instagram, WhatsApp, Messenger, and the web to get things done, learn, create, and connect with the things that matter to you. You can read more about the Meta AI experience here .

Visit the Llama 3 website to download the models and reference the Getting Started Guide for the latest list of all available platforms.

You’ll also soon be able to test multimodal Meta AI on our Ray-Ban Meta smart glasses.

As always, we look forward to seeing all the amazing products and experiences you will build with Meta Llama 3.

Our latest updates delivered to your inbox

Subscribe to our newsletter to keep up with Meta AI news, events, research breakthroughs, and more.

Join us in the pursuit of what’s possible with AI.

Product experiences

Foundational models

Latest news

Meta © 2024