writing a scientific dissertation

How To Write A Dissertation Or Thesis

8 straightforward steps to craft an a-grade dissertation.

By: Derek Jansen (MBA) Expert Reviewed By: Dr Eunice Rautenbach | June 2020

Writing a dissertation or thesis is not a simple task. It takes time, energy and a lot of will power to get you across the finish line. It’s not easy – but it doesn’t necessarily need to be a painful process. If you understand the big-picture process of how to write a dissertation or thesis, your research journey will be a lot smoother.  

In this post, I’m going to outline the big-picture process of how to write a high-quality dissertation or thesis, without losing your mind along the way. If you’re just starting your research, this post is perfect for you. Alternatively, if you’ve already submitted your proposal, this article which covers how to structure a dissertation might be more helpful.

How To Write A Dissertation: 8 Steps

• Clearly understand what a dissertation (or thesis) is
• Find a unique and valuable research topic
• Craft a convincing research proposal
• Write up a strong introduction chapter
• Review the existing literature and compile a literature review
• Design a rigorous research strategy and undertake your own research
• Present the findings of your research
• Draw a conclusion and discuss the implications

Step 1: Understand exactly what a dissertation is

This probably sounds like a no-brainer, but all too often, students come to us for help with their research and the underlying issue is that they don’t fully understand what a dissertation (or thesis) actually is.

So, what is a dissertation?

At its simplest, a dissertation or thesis is a formal piece of research , reflecting the standard research process . But what is the standard research process, you ask? The research process involves 4 key steps:

• Ask a very specific, well-articulated question (s) (your research topic)
• See what other researchers have said about it (if they’ve already answered it)
• If they haven’t answered it adequately, undertake your own data collection and analysis in a scientifically rigorous fashion
• Answer your original question(s), based on your analysis findings

In short, the research process is simply about asking and answering questions in a systematic fashion . This probably sounds pretty obvious, but people often think they’ve done “research”, when in fact what they have done is:

• Started with a vague, poorly articulated question
• Not taken the time to see what research has already been done regarding the question
• Collected data and opinions that support their gut and undertaken a flimsy analysis
• Drawn a shaky conclusion, based on that analysis

If you want to see the perfect example of this in action, look out for the next Facebook post where someone claims they’ve done “research”… All too often, people consider reading a few blog posts to constitute research. Its no surprise then that what they end up with is an opinion piece, not research. Okay, okay – I’ll climb off my soapbox now.

The key takeaway here is that a dissertation (or thesis) is a formal piece of research, reflecting the research process. It’s not an opinion piece , nor a place to push your agenda or try to convince someone of your position. Writing a good dissertation involves asking a question and taking a systematic, rigorous approach to answering it.

If you understand this and are comfortable leaving your opinions or preconceived ideas at the door, you’re already off to a good start!

Step 2: Find a unique, valuable research topic

As we saw, the first step of the research process is to ask a specific, well-articulated question. In other words, you need to find a research topic that asks a specific question or set of questions (these are called research questions ). Sounds easy enough, right? All you’ve got to do is identify a question or two and you’ve got a winning research topic. Well, not quite…

A good dissertation or thesis topic has a few important attributes. Specifically, a solid research topic should be:

Let’s take a closer look at these:

Attribute #1: Clear

Your research topic needs to be crystal clear about what you’re planning to research, what you want to know, and within what context. There shouldn’t be any ambiguity or vagueness about what you’ll research.

Here’s an example of a clearly articulated research topic:

An analysis of consumer-based factors influencing organisational trust in British low-cost online equity brokerage firms.

As you can see in the example, its crystal clear what will be analysed (factors impacting organisational trust), amongst who (consumers) and in what context (British low-cost equity brokerage firms, based online).

Need a helping hand?

Attribute #2:   Unique

Your research should be asking a question(s) that hasn’t been asked before, or that hasn’t been asked in a specific context (for example, in a specific country or industry).

For example, sticking organisational trust topic above, it’s quite likely that organisational trust factors in the UK have been investigated before, but the context (online low-cost equity brokerages) could make this research unique. Therefore, the context makes this research original.

One caveat when using context as the basis for originality – you need to have a good reason to suspect that your findings in this context might be different from the existing research – otherwise, there’s no reason to warrant researching it.

Attribute #3: Important

Simply asking a unique or original question is not enough – the question needs to create value. In other words, successfully answering your research questions should provide some value to the field of research or the industry. You can’t research something just to satisfy your curiosity. It needs to make some form of contribution either to research or industry.

For example, researching the factors influencing consumer trust would create value by enabling businesses to tailor their operations and marketing to leverage factors that promote trust. In other words, it would have a clear benefit to industry.

So, how do you go about finding a unique and valuable research topic? We explain that in detail in this video post – How To Find A Research Topic . Yeah, we’ve got you covered 😊

Step 3: Write a convincing research proposal

Once you’ve pinned down a high-quality research topic, the next step is to convince your university to let you research it. No matter how awesome you think your topic is, it still needs to get the rubber stamp before you can move forward with your research. The research proposal is the tool you’ll use for this job.

So, what’s in a research proposal?

The main “job” of a research proposal is to convince your university, advisor or committee that your research topic is worthy of approval. But convince them of what? Well, this varies from university to university, but generally, they want to see that:

• You have a clearly articulated, unique and important topic (this might sound familiar…)
• You’ve done some initial reading of the existing literature relevant to your topic (i.e. a literature review)
• You have a provisional plan in terms of how you will collect data and analyse it (i.e. a methodology)

At the proposal stage, it’s (generally) not expected that you’ve extensively reviewed the existing literature , but you will need to show that you’ve done enough reading to identify a clear gap for original (unique) research. Similarly, they generally don’t expect that you have a rock-solid research methodology mapped out, but you should have an idea of whether you’ll be undertaking qualitative or quantitative analysis , and how you’ll collect your data (we’ll discuss this in more detail later).

Long story short – don’t stress about having every detail of your research meticulously thought out at the proposal stage – this will develop as you progress through your research. However, you do need to show that you’ve “done your homework” and that your research is worthy of approval .

So, how do you go about crafting a high-quality, convincing proposal? We cover that in detail in this video post – How To Write A Top-Class Research Proposal . We’ve also got a video walkthrough of two proposal examples here .

Step 4: Craft a strong introduction chapter

Once your proposal’s been approved, its time to get writing your actual dissertation or thesis! The good news is that if you put the time into crafting a high-quality proposal, you’ve already got a head start on your first three chapters – introduction, literature review and methodology – as you can use your proposal as the basis for these.

Handy sidenote – our free dissertation & thesis template is a great way to speed up your dissertation writing journey.

What’s the introduction chapter all about?

The purpose of the introduction chapter is to set the scene for your research (dare I say, to introduce it…) so that the reader understands what you’ll be researching and why it’s important. In other words, it covers the same ground as the research proposal in that it justifies your research topic.

What goes into the introduction chapter?

This can vary slightly between universities and degrees, but generally, the introduction chapter will include the following:

• A brief background to the study, explaining the overall area of research
• A problem statement , explaining what the problem is with the current state of research (in other words, where the knowledge gap exists)
• Your research questions – in other words, the specific questions your study will seek to answer (based on the knowledge gap)
• The significance of your study – in other words, why it’s important and how its findings will be useful in the world

As you can see, this all about explaining the “what” and the “why” of your research (as opposed to the “how”). So, your introduction chapter is basically the salesman of your study, “selling” your research to the first-time reader and (hopefully) getting them interested to read more.

How do I write the introduction chapter, you ask? We cover that in detail in this post .

Step 5: Undertake an in-depth literature review

As I mentioned earlier, you’ll need to do some initial review of the literature in Steps 2 and 3 to find your research gap and craft a convincing research proposal – but that’s just scratching the surface. Once you reach the literature review stage of your dissertation or thesis, you need to dig a lot deeper into the existing research and write up a comprehensive literature review chapter.

What’s the literature review all about?

There are two main stages in the literature review process:

Literature Review Step 1: Reading up

The first stage is for you to deep dive into the existing literature (journal articles, textbook chapters, industry reports, etc) to gain an in-depth understanding of the current state of research regarding your topic. While you don’t need to read every single article, you do need to ensure that you cover all literature that is related to your core research questions, and create a comprehensive catalogue of that literature , which you’ll use in the next step.

Reading and digesting all the relevant literature is a time consuming and intellectually demanding process. Many students underestimate just how much work goes into this step, so make sure that you allocate a good amount of time for this when planning out your research. Thankfully, there are ways to fast track the process – be sure to check out this article covering how to read journal articles quickly .

Literature Review Step 2: Writing up

Once you’ve worked through the literature and digested it all, you’ll need to write up your literature review chapter. Many students make the mistake of thinking that the literature review chapter is simply a summary of what other researchers have said. While this is partly true, a literature review is much more than just a summary. To pull off a good literature review chapter, you’ll need to achieve at least 3 things:

• You need to synthesise the existing research , not just summarise it. In other words, you need to show how different pieces of theory fit together, what’s agreed on by researchers, what’s not.
• You need to highlight a research gap that your research is going to fill. In other words, you’ve got to outline the problem so that your research topic can provide a solution.
• You need to use the existing research to inform your methodology and approach to your own research design. For example, you might use questions or Likert scales from previous studies in your your own survey design .

As you can see, a good literature review is more than just a summary of the published research. It’s the foundation on which your own research is built, so it deserves a lot of love and attention. Take the time to craft a comprehensive literature review with a suitable structure .

But, how do I actually write the literature review chapter, you ask? We cover that in detail in this video post .

Step 6: Carry out your own research

Once you’ve completed your literature review and have a sound understanding of the existing research, its time to develop your own research (finally!). You’ll design this research specifically so that you can find the answers to your unique research question.

There are two steps here – designing your research strategy and executing on it:

1 – Design your research strategy

The first step is to design your research strategy and craft a methodology chapter . I won’t get into the technicalities of the methodology chapter here, but in simple terms, this chapter is about explaining the “how” of your research. If you recall, the introduction and literature review chapters discussed the “what” and the “why”, so it makes sense that the next point to cover is the “how” –that’s what the methodology chapter is all about.

In this section, you’ll need to make firm decisions about your research design. This includes things like:

• Your research philosophy (e.g. positivism or interpretivism )
• Your overall methodology (e.g. qualitative , quantitative or mixed methods)
• Your data collection strategy (e.g. interviews , focus groups, surveys)
• Your data analysis strategy (e.g. content analysis , correlation analysis, regression)

If these words have got your head spinning, don’t worry! We’ll explain these in plain language in other posts. It’s not essential that you understand the intricacies of research design (yet!). The key takeaway here is that you’ll need to make decisions about how you’ll design your own research, and you’ll need to describe (and justify) your decisions in your methodology chapter.

2 – Execute: Collect and analyse your data

Once you’ve worked out your research design, you’ll put it into action and start collecting your data. This might mean undertaking interviews, hosting an online survey or any other data collection method. Data collection can take quite a bit of time (especially if you host in-person interviews), so be sure to factor sufficient time into your project plan for this. Oftentimes, things don’t go 100% to plan (for example, you don’t get as many survey responses as you hoped for), so bake a little extra time into your budget here.

Once you’ve collected your data, you’ll need to do some data preparation before you can sink your teeth into the analysis. For example:

• If you carry out interviews or focus groups, you’ll need to transcribe your audio data to text (i.e. a Word document).
• If you collect quantitative survey data, you’ll need to clean up your data and get it into the right format for whichever analysis software you use (for example, SPSS, R or STATA).

Once you’ve completed your data prep, you’ll undertake your analysis, using the techniques that you described in your methodology. Depending on what you find in your analysis, you might also do some additional forms of analysis that you hadn’t planned for. For example, you might see something in the data that raises new questions or that requires clarification with further analysis.

The type(s) of analysis that you’ll use depend entirely on the nature of your research and your research questions. For example:

• If your research if exploratory in nature, you’ll often use qualitative analysis techniques .
• If your research is confirmatory in nature, you’ll often use quantitative analysis techniques
• If your research involves a mix of both, you might use a mixed methods approach

Again, if these words have got your head spinning, don’t worry! We’ll explain these concepts and techniques in other posts. The key takeaway is simply that there’s no “one size fits all” for research design and methodology – it all depends on your topic, your research questions and your data. So, don’t be surprised if your study colleagues take a completely different approach to yours.

Step 7: Present your findings

Once you’ve completed your analysis, it’s time to present your findings (finally!). In a dissertation or thesis, you’ll typically present your findings in two chapters – the results chapter and the discussion chapter .

What’s the difference between the results chapter and the discussion chapter?

While these two chapters are similar, the results chapter generally just presents the processed data neatly and clearly without interpretation, while the discussion chapter explains the story the data are telling  – in other words, it provides your interpretation of the results.

For example, if you were researching the factors that influence consumer trust, you might have used a quantitative approach to identify the relationship between potential factors (e.g. perceived integrity and competence of the organisation) and consumer trust. In this case:

• Your results chapter would just present the results of the statistical tests. For example, correlation results or differences between groups. In other words, the processed numbers.
• Your discussion chapter would explain what the numbers mean in relation to your research question(s). For example, Factor 1 has a weak relationship with consumer trust, while Factor 2 has a strong relationship.

Depending on the university and degree, these two chapters (results and discussion) are sometimes merged into one , so be sure to check with your institution what their preference is. Regardless of the chapter structure, this section is about presenting the findings of your research in a clear, easy to understand fashion.

Importantly, your discussion here needs to link back to your research questions (which you outlined in the introduction or literature review chapter). In other words, it needs to answer the key questions you asked (or at least attempt to answer them).

For example, if we look at the sample research topic:

In this case, the discussion section would clearly outline which factors seem to have a noteworthy influence on organisational trust. By doing so, they are answering the overarching question and fulfilling the purpose of the research .

For more information about the results chapter , check out this post for qualitative studies and this post for quantitative studies .

Step 8: The Final Step Draw a conclusion and discuss the implications

Last but not least, you’ll need to wrap up your research with the conclusion chapter . In this chapter, you’ll bring your research full circle by highlighting the key findings of your study and explaining what the implications of these findings are.

What exactly are key findings? The key findings are those findings which directly relate to your original research questions and overall research objectives (which you discussed in your introduction chapter). The implications, on the other hand, explain what your findings mean for industry, or for research in your area.

Sticking with the consumer trust topic example, the conclusion might look something like this:

Key findings

This study set out to identify which factors influence consumer-based trust in British low-cost online equity brokerage firms. The results suggest that the following factors have a large impact on consumer trust:

While the following factors have a very limited impact on consumer trust:

Notably, within the 25-30 age groups, Factors E had a noticeably larger impact, which may be explained by…

Implications

The findings having noteworthy implications for British low-cost online equity brokers. Specifically:

The large impact of Factors X and Y implies that brokers need to consider….

The limited impact of Factor E implies that brokers need to…

As you can see, the conclusion chapter is basically explaining the “what” (what your study found) and the “so what?” (what the findings mean for the industry or research). This brings the study full circle and closes off the document.

Let’s recap – how to write a dissertation or thesis

You’re still with me? Impressive! I know that this post was a long one, but hopefully you’ve learnt a thing or two about how to write a dissertation or thesis, and are now better equipped to start your own research.

To recap, the 8 steps to writing a quality dissertation (or thesis) are as follows:

• Understand what a dissertation (or thesis) is – a research project that follows the research process.
• Find a unique (original) and important research topic
• Craft a convincing dissertation or thesis research proposal
• Write a clear, compelling introduction chapter
• Undertake a thorough review of the existing research and write up a literature review
• Undertake your own research
• Present and interpret your findings

Once you’ve wrapped up the core chapters, all that’s typically left is the abstract , reference list and appendices. As always, be sure to check with your university if they have any additional requirements in terms of structure or content.  

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

20 Comments

thankfull >>>this is very useful

Thank you, it was really helpful

unquestionably, this amazing simplified way of teaching. Really , I couldn’t find in the literature words that fully explicit my great thanks to you. However, I could only say thanks a-lot.

Great to hear that – thanks for the feedback. Good luck writing your dissertation/thesis.

This is the most comprehensive explanation of how to write a dissertation. Many thanks for sharing it free of charge.

Very rich presentation. Thank you

Thanks Derek Jansen|GRADCOACH, I find it very useful guide to arrange my activities and proceed to research!

Thank you so much for such a marvelous teaching .I am so convinced that am going to write a comprehensive and a distinct masters dissertation

It is an amazing comprehensive explanation

This was straightforward. Thank you!

I can say that your explanations are simple and enlightening – understanding what you have done here is easy for me. Could you write more about the different types of research methods specific to the three methodologies: quan, qual and MM. I look forward to interacting with this website more in the future.

Thanks for the feedback and suggestions 🙂

Hello, your write ups is quite educative. However, l have challenges in going about my research questions which is below; *Building the enablers of organisational growth through effective governance and purposeful leadership.*

Very educating.

Just listening to the name of the dissertation makes the student nervous. As writing a top-quality dissertation is a difficult task as it is a lengthy topic, requires a lot of research and understanding and is usually around 10,000 to 15000 words. Sometimes due to studies, unbalanced workload or lack of research and writing skill students look for dissertation submission from professional writers.

Thank you 💕😊 very much. I was confused but your comprehensive explanation has cleared my doubts of ever presenting a good thesis. Thank you.

thank you so much, that was so useful

Hi. Where is the excel spread sheet ark?

could you please help me look at your thesis paper to enable me to do the portion that has to do with the specification

my topic is “the impact of domestic revenue mobilization.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation

How to Write a Dissertation | A Guide to Structure & Content

A dissertation or thesis is a long piece of academic writing based on original research, submitted as part of an undergraduate or postgraduate degree.

The structure of a dissertation depends on your field, but it is usually divided into at least four or five chapters (including an introduction and conclusion chapter).

The most common dissertation structure in the sciences and social sciences includes:

• An introduction to your topic
• A literature review that surveys relevant sources
• An explanation of your methodology
• An overview of the results of your research
• A discussion of the results and their implications
• A conclusion that shows what your research has contributed

Dissertations in the humanities are often structured more like a long essay , building an argument by analysing primary and secondary sources . Instead of the standard structure outlined here, you might organise your chapters around different themes or case studies.

Other important elements of the dissertation include the title page , abstract , and reference list . If in doubt about how your dissertation should be structured, always check your department’s guidelines and consult with your supervisor.

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Acknowledgements, table of contents, list of figures and tables, list of abbreviations, introduction, literature review / theoretical framework, methodology, reference list.

The very first page of your document contains your dissertation’s title, your name, department, institution, degree program, and submission date. Sometimes it also includes your student number, your supervisor’s name, and the university’s logo. Many programs have strict requirements for formatting the dissertation title page .

The title page is often used as cover when printing and binding your dissertation .

Prevent plagiarism, run a free check.

The acknowledgements section is usually optional, and gives space for you to thank everyone who helped you in writing your dissertation. This might include your supervisors, participants in your research, and friends or family who supported you.

The abstract is a short summary of your dissertation, usually about 150-300 words long. You should write it at the very end, when you’ve completed the rest of the dissertation. In the abstract, make sure to:

• State the main topic and aims of your research
• Describe the methods you used
• Summarise the main results
• State your conclusions

Although the abstract is very short, it’s the first part (and sometimes the only part) of your dissertation that people will read, so it’s important that you get it right. If you’re struggling to write a strong abstract, read our guide on how to write an abstract .

In the table of contents, list all of your chapters and subheadings and their page numbers. The dissertation contents page gives the reader an overview of your structure and helps easily navigate the document.

All parts of your dissertation should be included in the table of contents, including the appendices. You can generate a table of contents automatically in Word.

If you have used a lot of tables and figures in your dissertation, you should itemise them in a numbered list . You can automatically generate this list using the Insert Caption feature in Word.

If you have used a lot of abbreviations in your dissertation, you can include them in an alphabetised list of abbreviations so that the reader can easily look up their meanings.

If you have used a lot of highly specialised terms that will not be familiar to your reader, it might be a good idea to include a glossary . List the terms alphabetically and explain each term with a brief description or definition.

In the introduction, you set up your dissertation’s topic, purpose, and relevance, and tell the reader what to expect in the rest of the dissertation. The introduction should:

• Establish your research topic , giving necessary background information to contextualise your work
• Narrow down the focus and define the scope of the research
• Discuss the state of existing research on the topic, showing your work’s relevance to a broader problem or debate
• Clearly state your objectives and research questions , and indicate how you will answer them
• Give an overview of your dissertation’s structure

Everything in the introduction should be clear, engaging, and relevant to your research. By the end, the reader should understand the what , why and how of your research. Not sure how? Read our guide on how to write a dissertation introduction .

Before you start on your research, you should have conducted a literature review to gain a thorough understanding of the academic work that already exists on your topic. This means:

• Collecting sources (e.g. books and journal articles) and selecting the most relevant ones
• Critically evaluating and analysing each source
• Drawing connections between them (e.g. themes, patterns, conflicts, gaps) to make an overall point

In the dissertation literature review chapter or section, you shouldn’t just summarise existing studies, but develop a coherent structure and argument that leads to a clear basis or justification for your own research. For example, it might aim to show how your research:

• Addresses a gap in the literature
• Takes a new theoretical or methodological approach to the topic
• Proposes a solution to an unresolved problem
• Advances a theoretical debate
• Builds on and strengthens existing knowledge with new data

The literature review often becomes the basis for a theoretical framework , in which you define and analyse the key theories, concepts and models that frame your research. In this section you can answer descriptive research questions about the relationship between concepts or variables.

The methodology chapter or section describes how you conducted your research, allowing your reader to assess its validity. You should generally include:

• The overall approach and type of research (e.g. qualitative, quantitative, experimental, ethnographic)
• Your methods of collecting data (e.g. interviews, surveys, archives)
• Details of where, when, and with whom the research took place
• Your methods of analysing data (e.g. statistical analysis, discourse analysis)
• Tools and materials you used (e.g. computer programs, lab equipment)
• A discussion of any obstacles you faced in conducting the research and how you overcame them
• An evaluation or justification of your methods

Your aim in the methodology is to accurately report what you did, as well as convincing the reader that this was the best approach to answering your research questions or objectives.

Next, you report the results of your research . You can structure this section around sub-questions, hypotheses, or topics. Only report results that are relevant to your objectives and research questions. In some disciplines, the results section is strictly separated from the discussion, while in others the two are combined.

For example, for qualitative methods like in-depth interviews, the presentation of the data will often be woven together with discussion and analysis, while in quantitative and experimental research, the results should be presented separately before you discuss their meaning. If you’re unsure, consult with your supervisor and look at sample dissertations to find out the best structure for your research.

In the results section it can often be helpful to include tables, graphs and charts. Think carefully about how best to present your data, and don’t include tables or figures that just repeat what you have written  –  they should provide extra information or usefully visualise the results in a way that adds value to your text.

Full versions of your data (such as interview transcripts) can be included as an appendix .

The discussion  is where you explore the meaning and implications of your results in relation to your research questions. Here you should interpret the results in detail, discussing whether they met your expectations and how well they fit with the framework that you built in earlier chapters. If any of the results were unexpected, offer explanations for why this might be. It’s a good idea to consider alternative interpretations of your data and discuss any limitations that might have influenced the results.

The discussion should reference other scholarly work to show how your results fit with existing knowledge. You can also make recommendations for future research or practical action.

The dissertation conclusion should concisely answer the main research question, leaving the reader with a clear understanding of your central argument. Wrap up your dissertation with a final reflection on what you did and how you did it. The conclusion often also includes recommendations for research or practice.

In this section, it’s important to show how your findings contribute to knowledge in the field and why your research matters. What have you added to what was already known?

You must include full details of all sources that you have cited in a reference list (sometimes also called a works cited list or bibliography). It’s important to follow a consistent reference style . Each style has strict and specific requirements for how to format your sources in the reference list.

The most common styles used in UK universities are Harvard referencing and Vancouver referencing . Your department will often specify which referencing style you should use – for example, psychology students tend to use APA style , humanities students often use MHRA , and law students always use OSCOLA . M ake sure to check the requirements, and ask your supervisor if you’re unsure.

To save time creating the reference list and make sure your citations are correctly and consistently formatted, you can use our free APA Citation Generator .

Your dissertation itself should contain only essential information that directly contributes to answering your research question. Documents you have used that do not fit into the main body of your dissertation (such as interview transcripts, survey questions or tables with full figures) can be added as appendices .

Is this article helpful?

Other students also liked.

• What Is a Dissertation? | 5 Essential Questions to Get Started
• What is a Literature Review? | Guide, Template, & Examples
• How to Write a Dissertation Proposal | A Step-by-Step Guide

More interesting articles

• Checklist: Writing a dissertation
• Dissertation & Thesis Outline | Example & Free Templates
• Dissertation binding and printing
• Dissertation Table of Contents in Word | Instructions & Examples
• Dissertation title page
• Example Theoretical Framework of a Dissertation or Thesis
• Figure & Table Lists | Word Instructions, Template & Examples
• How to Choose a Dissertation Topic | 8 Steps to Follow
• How to Write a Discussion Section | Tips & Examples
• How to Write a Results Section | Tips & Examples
• How to Write a Thesis or Dissertation Conclusion
• How to Write a Thesis or Dissertation Introduction
• How to Write an Abstract | Steps & Examples
• How to Write Recommendations in Research | Examples & Tips
• List of Abbreviations | Example, Template & Best Practices
• Operationalisation | A Guide with Examples, Pros & Cons
• Prize-Winning Thesis and Dissertation Examples
• Relevance of Your Dissertation Topic | Criteria & Tips
• Research Paper Appendix | Example & Templates
• Thesis & Dissertation Acknowledgements | Tips & Examples
• Thesis & Dissertation Database Examples
• What is a Dissertation Preface? | Definition & Examples
• What is a Glossary? | Definition, Templates, & Examples
• What Is a Research Methodology? | Steps & Tips
• What is a Theoretical Framework? | A Step-by-Step Guide
• What Is a Thesis? | Ultimate Guide & Examples