the case study method of conducting research is justifiably criticized because

Chapter 11 Case Research

Case research, also called case study, is a method of intensively studying a phenomenon over time within its natural setting in one or a few sites. Multiple methods of data collection, such as interviews, observations, prerecorded documents, and secondary data, may be employed and inferences about the phenomenon of interest tend to be rich, detailed, and contextualized. Case research can be employed in a positivist manner for the purpose of theory testing or in an interpretive manner for theory building. This method is more popular in business research than in other social science disciplines.

Case research has several unique strengths over competing research methods such as experiments and survey research. First, case research can be used for either theory building or theory testing, while positivist methods can be used for theory testing only. In interpretive case research, the constructs of interest need not be known in advance, but may emerge from the data as the research progresses. Second, the research questions can be modified during the research process if the original questions are found to be less relevant or salient. This is not possible in any positivist method after the data is collected. Third, case research can help derive richer, more contextualized, and more authentic interpretation of the phenomenon of interest than most other research methods by virtue of its ability to capture a rich array of contextual data. Fourth, the phenomenon of interest can be studied from the perspectives of multiple participants and using multiple levels of analysis (e.g., individual and organizational).

At the same time, case research also has some inherent weaknesses. Because it involves no experimental control, internal validity of inferences remain weak. Of course, this is a common problem for all research methods except experiments. However, as described later, the problem of controls may be addressed in case research using “natural controls”. Second, the quality of inferences derived from case research depends heavily on the integrative powers of the researcher. An experienced researcher may see concepts and patterns in case data that a novice researcher may miss. Hence, the findings are sometimes criticized as being subjective. Finally, because the inferences are heavily contextualized, it may be difficult to generalize inferences from case research to other contexts or other organizations.

It is important to recognize that case research is different from case descriptions such as Harvard case studies discussed in business classes. While case descriptions typically describe an organizational problem in rich detail with the goal of stimulating classroom discussion and critical thinking among students, or analyzing how well an organization handled a specific problem, case research is a formal research technique that involves a scientific method to derive explanations of organizational phenomena.

Case research is a difficult research method that requires advanced research skills on the part of the researcher, and is therefore, often prone to error. Benbasat et al. (1987) [8] describe five problems frequently encountered in case research studies. First, many case research studies start without specific research questions, and therefore end up without having any specific answers or insightful inferences. Second, case sites are often chosen based on access and convenience, rather than based on the fit with the research questions, and are therefore cannot adequately address the research questions of interest. Third, researchers often do not validate or triangulate data collected using multiple means, which may lead to biased interpretation based on responses from biased interviewees. Fourth, many studies provide very little details on how data was collected (e.g., what interview questions were used, which documents were examined, what are the organizational positions of each interviewee, etc.) or analyzed, which may raise doubts about the reliability of the inferences. Finally, despite its strength as a longitudinal research method, many case research studies do not follow through a phenomenon in a longitudinal manner, and hence present only a cross-sectional and limited view of organizational processes and phenomena that are temporal in nature.

Key Decisions in Case Research

Several key decisions must be made by a researcher when considering a case research method. First, is this the right method for the research questions being studied? The case research method is particularly appropriate for exploratory studies for discovering relevant constructs in areas where theory building at the formative stages, for studies where the experiences of participants and context of actions are critical, and for studies aimed at understanding complex, temporal processes (why and how of a phenomenon) rather than factors or causes (what). This method is well-suited for studying complex organizational processes that involve multiple participants and interacting sequences of events, such as organizational change and large-scale technology implementation projects.

Second, what is the appropriate unit of analysis for a case research study? Since case research can simultaneously examine multiple units of analyses, the researcher must decide whether she wishes to study a phenomenon at the individual, group, and organizational level or at multiple levels. For instance, a study of group decision making or group work may combine individual-level constructs such as individual participation in group activities with group-level constructs, such as group cohesion and group leadership, to derive richer understanding than that can be achieved from a single level of analysis.

Third, should the researcher employ a single-case or multiple-case design? The single case design is more appropriate at the outset of theory generation, if the situation is unique or extreme, if it is revelatory (i.e., the situation was previously inaccessible for scientific investigation), or if it represents a critical or contrary case for testing a well-formulated theory. The multiple case design is more appropriate for theory testing, for establishing generalizability of inferences, and for developing richer and more nuanced interpretations of a phenomenon. Yin (1984) [9] recommends the use of multiple case sites with replication logic, viewing each case site as similar to one experimental study, and following rules of scientific rigor similar to that used in positivist research.

Fourth, what sites should be chosen for case research? Given the contextualized nature of inferences derived from case research, site selection is a particularly critical issue because selecting the wrong site may lead to the wrong inferences. If the goal of the research is to test theories or examine generalizability of inferences, then dissimilar case sites should be selected to increase variance in observations. For instance, if the goal of the research is to understand the process of technology implementation in firms, a mix of large, mid-sized, and small firms should be selected to examine whether the technology implementation process differs with firm size. Site selection should not be opportunistic or based on convenience, but rather based on the fit with research questions through a process called “theoretical sampling.”

Fifth, what techniques of data collection should be used in case research? Although interview (either open-ended/unstructured or focused/structured) is by far the most popular data collection technique for case research, interview data can be supplemented or corroborated with other techniques such as direct observation (e.g., attending executive meetings, briefings, and planning sessions), documentation (e.g., internal reports, presentations, and memoranda, as well as external accounts such as newspaper reports), archival records (e.g., organization charts, financial records, etc.), and physical artifacts (e.g., devices, outputs, tools). Furthermore, the researcher should triangulate or validate observed data by comparing responses between interviewees.

Conducting Case Research

Most case research studies tend to be interpretive in nature. Interpretive case research is an inductive technique where evidence collected from one or more case sites is systematically analyzed and synthesized to allow concepts and patterns to emerge for the purpose of building new theories or expanding existing ones. Eisenhardt (1989) [10] propose a “roadmap” for building theories from case research, a slightly modified version of which is described below. For positivist case research, some of the following stages may need to be rearranged or modified; however sampling, data collection, and data analytic techniques should generally remain the same.

Define research questions. Like any other scientific research, case research must also start with defining research questions that are theoretically and practically interesting, and identifying some intuitive expectations about possible answers to those research questions or preliminary constructs to guide initial case design. In positivist case research, the preliminary constructs are based on theory, while no such theory or hypotheses should be considered ex ante in interpretive research. These research questions and constructs may be changed in interpretive case research later on, if needed, but not in positivist case research.

Select case sites. The researcher should use a process of “theoretical sampling” (not random sampling) to identify case sites. In this approach, case sites are chosen based on theoretical, rather than statistical, considerations, for instance, to replicate previous cases, to extend preliminary theories, or to fill theoretical categories or polar types. Care should be taken to ensure that the selected sites fit the nature of research questions, minimize extraneous variance or noise due to firm size, industry effects, and so forth, and maximize variance in the dependent variables of interest. For instance, if the goal of the research is to examine how some firms innovate better than others, the researcher should select firms of similar size within the same industry to reduce industry or size effects, and select some more innovative and some less innovative firms to increase variation in firm innovation. Instead of cold-calling or writing to a potential site, it is better to contact someone at executive level inside each firm who has the authority to approve the project or someone who can identify a person of authority. During initial conversations, the researcher should describe the nature and purpose of the project, any potential benefits to the case site, how the collected data will be used, the people involved in data collection (other researchers, research assistants, etc.), desired interviewees, and the amount of time, effort, and expense required of the sponsoring organization. The researcher must also assure confidentiality, privacy, and anonymity of both the firm and the individual respondents.

Create instruments and protocols. Since the primary mode of data collection in case research is interviews, an interview protocol should be designed to guide the interview process. This is essentially a list of questions to be asked. Questions may be open-ended (unstructured) or closed-ended (structured) or a combination of both. The interview protocol must be strictly followed, and the interviewer must not change the order of questions or skip any question during the interview process, although some deviations are allowed to probe further into respondent’s comments that are ambiguous or interesting. The interviewer must maintain a neutral tone, not lead respondents in any specific direction, say by agreeing or disagreeing with any response. More detailed interviewing techniques are discussed in the chapter on surveys. In addition, additional sources of data, such as internal documents and memorandums, annual reports, financial statements, newspaper articles, and direct observations should be sought to supplement and validate interview data.

Select respondents. Select interview respondents at different organizational levels, departments, and positions to obtain divergent perspectives on the phenomenon of interest. A random sampling of interviewees is most preferable; however a snowball sample is acceptable, as long as a diversity of perspectives is represented in the sample. Interviewees must be selected based on their personal involvement with the phenomenon under investigation and their ability and willingness to answer the researcher’s questions accurately and adequately, and not based on convenience or access.

Start data collection . It is usually a good idea to electronically record interviews for future reference. However, such recording must only be done with the interviewee’s consent. Even when interviews are being recorded, the interviewer should take notes to capture important comments or critical observations, behavioral responses (e.g., respondent’s body language), and the researcher’s personal impressions about the respondent and his/her comments. After each interview is completed, the entire interview should be transcribed verbatim into a text document for analysis.

Conduct within-case data analysis. Data analysis may follow or overlap with data collection. Overlapping data collection and analysis has the advantage of adjusting the data collection process based on themes emerging from data analysis, or to further probe into these themes. Data analysis is done in two stages. In the first stage (within-case analysis), the researcher should examine emergent concepts separately at each case site and patterns between these concepts to generate an initial theory of the problem of interest. The researcher can interview data subjectively to “make sense” of the research problem in conjunction with using her personal observations or experience at the case site. Alternatively, a coding strategy such as Glasser and Strauss’ (1967) grounded theory approach, using techniques such as open coding, axial coding, and selective coding, may be used to derive a chain of evidence and inferences. These techniques are discussed in detail in a later chapter. Homegrown techniques, such as graphical representation of data (e.g., network diagram) or sequence analysis (for longitudinal data) may also be used. Note that there is no predefined way of analyzing the various types of case data, and the data analytic techniques can be modified to fit the nature of the research project.

Conduct cross-case analysis. Multi-site case research requires cross-case analysis as the second stage of data analysis. In such analysis, the researcher should look for similar concepts and patterns between different case sites, ignoring contextual differences that may lead to idiosyncratic conclusions. Such patterns may be used for validating the initial theory, or for refining it (by adding or dropping concepts and relationships) to develop a more inclusive and generalizable theory. This analysis may take several forms. For instance, the researcher may select categories (e.g., firm size, industry, etc.) and look for within-group similarities and between-group differences (e.g., high versus low performers, innovators versus laggards). Alternatively, she can compare firms in a pair-wise manner listing similarities and differences across pairs of firms.

Build and test hypotheses. Based on emergent concepts and themes that are generalizable across case sites, tentative hypotheses are constructed. These hypotheses should be compared iteratively with observed evidence to see if they fit the observed data, and if not, the constructs or relationships should be refined. Also the researcher should compare the emergent constructs and hypotheses with those reported in the prior literature to make a case for their internal validity and generalizability. Conflicting findings must not be rejected, but rather reconciled using creative thinking to generate greater insight into the emergent theory. When further iterations between theory and data yield no new insights or changes in the existing theory, “theoretical saturation” is reached and the theory building process is complete.

Write case research report. In writing the report, the researcher should describe very clearly the detailed process used for sampling, data collection, data analysis, and hypotheses development, so that readers can independently assess the reasonableness, strength, and consistency of the reported inferences. A high level of clarity in research methods is needed to ensure that the findings are not biased by the researcher’s preconceptions.

Interpretive Case Research Exemplar

Perhaps the best way to learn about interpretive case research is to examine an illustrative example. One such example is Eisenhardt’s (1989) [11] study of how executives make decisions in high-velocity environments (HVE). Readers are advised to read the original paper published in Academy of Management Journal before reading the synopsis in this chapter. In this study, Eisenhardt examined how executive teams in some HVE firms make fast decisions, while those in other firms cannot, and whether faster decisions improve or worsen firm performance in such environments. HVE was defined as one where demand, competition, and technology changes so rapidly and discontinuously that the information available is often inaccurate, unavailable or obsolete. The implicit assumptions were that (1) it is hard to make fast decisions with inadequate information in HVE, and (2) fast decisions may not be efficient and may result in poor firm performance.

Reviewing the prior literature on executive decision -making, Eisenhardt found several patterns, although none of these patterns were specific to high-velocity environments. The literature suggested that in the interest of expediency, firms that make faster decisions obtain input from fewer sources, consider fewer alternatives, make limited analysis, restrict user participation in decision-making, centralize decision-making authority, and has limited internal conflicts. However, Eisenhardt contended that these views may not necessarily explain how decision makers make decisions in high-velocity environments, where decisions must be made quickly and with incomplete information, while maintaining high decision quality.

To examine this phenomenon, Eisenhardt conducted an inductive study of eight firms in the personal computing industry. The personal computing industry was undergoing dramatic changes in technology with the introduction of the UNIX operating system, RISC architecture, and 64KB random access memory in the 1980’s, increased competition with the entry of IBM into the personal computing business, and growing customer demand with double-digit demand growth, and therefore fit the profile of the high-velocity environment. This was a multiple case design with replication logic, where each case was expected to confirm or disconfirm inferences from other cases. Case sites were selected based on their access and proximity to the researcher; however, all of these firms operated in the high-velocity personal computing industry in California’s Silicon Valley area. The collocation of firms in the same industry and the same area ruled out any “noise” or variance in dependent variables (decision speed or performance) attributable to industry or geographic differences.

The study employed an embedded design with multiple levels of analysis: decision (comparing multiple strategic decisions within each firm), executive teams (comparing different teams responsible for strategic decisions), and the firm (overall firm performance). Data was collected from five sources:

• Initial interviews with Chief Executive Officers: CEOs were asked questions about their firm’s competitive strategy, distinctive competencies, major competitors, performance, and recent/ongoing major strategic decisions. Based on these interviews, several strategic decisions were selected in each firm for further investigation. Four criteria were used to select decisions: (1) the decisions involved the firm’s strategic positioning,

(2) the decisions had high stakes, (3) the decisions involved multiple functions, and (4) the decisions were representative of strategic decision-making process in that firm.

• Interviews with divisional heads: Each divisional head was asked sixteen open-ended questions, ranging from their firm’s competitive strategy, functional strategy, top management team members, frequency and nature of interaction with team, typical decision making processes, how each of the previously identified decision was made, and how long it took them to make those decisions. Interviews lasted between 1.5 and 2 hours, and sometimes extended to 4 hours. To focus on facts and actual events rather than respondents’ perceptions or interpretations, a “courtroom” style questioning was employed, such as when did this happen, what did you do, etc. Interviews were conducted by two people, and the data was validated by cross-checking facts and impressions made by the interviewer and note-taker. All interview data was recorded, however notes were also taken during each interview, which ended with the interviewer’s overall impressions. Using a “24-hour rule”, detailed field notes were completed within 24 hours of the interview, so that some data or impressions were not lost to recall.
• Questionnaires: Executive team members at each firm were completed a survey questionnaire that captured quantitative data on the extent of conflict and power distribution in their firm.
• Secondary data: Industry reports and internal documents such as demographics of the executive teams (responsible for strategic decisions), financial performance of firms, and so forth, were examined.
• Personal observation: Lastly, the researcher attended a 1-day strategy session and a weekly executive meeting at two firms in her sample.

Data analysis involved a combination of quantitative and qualitative techniques. Quantitative data on conflict and power were analyzed for patterns across firms/decisions. Qualitative interview data was combined into decision climate profiles, using profile traits (e.g., impatience) mentioned by more than one executive. For within-case analysis, decision stories were created for each strategic decision by combining executive accounts of the key decision events into a timeline. For cross-case analysis, pairs of firms were compared for similarities and differences, categorized along variables of interest such as decision speed and firm performance. Based on these analyses, tentative constructs and propositions were derived inductively from each decision story within firm categories. Each decision case was revisited to confirm the proposed relationships. The inferred propositions were compared with findings from the existing literature to reconcile examine differences with the extant literature and to generate new insights from the case findings. Finally, the validated propositions were synthesized into an inductive theory of strategic decision-making by firms in high-velocity environments.

Inferences derived from this multiple case research contradicted several decision-making patterns expected from the existing literature. First, fast decision makers in high-velocity environments used more information, and not less information as suggested by the previous literature. However, these decision makers used more real-time information (an insight not available from prior research), which helped them identify and respond to problems, opportunities, and changing circumstances faster. Second, fast decision makers examined more (not fewer) alternatives. However, they considered these multiple alternatives in a simultaneous manner, while slower decision makers examined fewer alternatives in a sequential manner. Third, fast decision makers did not centralize decision making or restrict inputs from others, as the literature suggested. Rather, these firms used a two-tiered decision process in which experienced counselors were asked for inputs in the first stage, following by a rapid comparison and decision selection in the second stage. Fourth, fast decision makers did not have less conflict, as expected from the literature, but employed better conflict resolution techniques to reduce conflict and improve decision-making speed. Finally, fast decision makers exhibited superior firm performance by virtue of their built-in cognitive, emotional, and political processes that led to rapid closure of major decisions.

Positivist Case Research Exemplar

Case research can also be used in a positivist manner to test theories or hypotheses. Such studies are rare, but Markus (1983) [12] provides an exemplary illustration in her study of technology implementation at the Golden Triangle Company (a pseudonym). The goal of this study was to understand why a newly implemented financial information system (FIS), intended to improve the productivity and performance of accountants at GTC was supported by accountants at GTC’s corporate headquarters but resisted by divisional accountants at GTC branches. Given the uniqueness of the phenomenon of interest, this was a single-case research study.

To explore the reasons behind user resistance of FIS, Markus posited three alternative explanations: (1) system-determined theory: resistance was caused by factors related to an inadequate system, such as its technical deficiencies, poor ergonomic design, or lack of user friendliness, (2) people-determined theory: resistance was caused by factors internal to users, such as the accountants’ cognitive styles or personality traits that were incompatible with using the system, and (3) interaction theory: resistance was not caused not by factors intrinsic to the system or the people, but by the interaction between the two set of factors. Specifically, interaction theory suggested that the FIS engendered a redistribution of intra-organizational power, and accountants who lost organizational status, relevance, or power as a result of FIS implementation resisted the system while those gaining power favored it.

In order to test the three theories, Markus predicted alternative outcomes expected from each theoretical explanation and analyzed the extent to which those predictions matched with her observations at GTC. For instance, the system-determined theory suggested that since user resistance was caused by an inadequate system, fixing the technical problems of the system would eliminate resistance. The computer running the FIS system was subsequently upgraded with a more powerful operating system, online processing (from initial batch processing, which delayed immediate processing of accounting information), and a simplified software for new account creation by managers. One year after these changes were made, the resistant users were still resisting the system and felt that it should be replaced. Hence, the system-determined theory was rejected.

The people-determined theory predicted that replacing individual resistors or co-opting them with less resistant users would reduce their resistance toward the FIS. Subsequently, GTC started a job rotation and mobility policy, moving accountants in and out of the resistant divisions, but resistance not only persisted, but in some cases increased! In one specific instance, one accountant, who was one of the system’s designers and advocates when he worked for corporate accounting, started resisting the system after he was moved to the divisional controller’s office. Failure to realize the predictions of the people-determined theory led to the rejection of this theory.

Finally, the interaction theory predicted that neither changing the system or the people (i.e., user education or job rotation policies) will reduce resistance as long as the power imbalance and redistribution from the pre-implementation phase were not addressed. Before FIS implementation, divisional accountants at GTC felt that they owned all accounting data related to their divisional operations. They maintained this data in thick, manual ledger books, controlled others’ access to the data, and could reconcile unusual accounting events before releasing those reports. Corporate accountants relied heavily on divisional accountants for access to the divisional data for corporate reporting and consolidation. Because the FIS system automatically collected all data at source and consolidated them into a single corporate database, it obviated the need for divisional accountants, loosened their control and autonomy over their division’s accounting data, and making their job somewhat irrelevant. Corporate accountants could now query the database and access divisional data directly without going through the divisional accountants, analyze and compare the performance of individual divisions, and report unusual patterns and activities to the executive committee, resulting in further erosion of the divisions’ power. Though Markus did not empirically test this theory, her observations about the redistribution of organizational power, coupled with the rejection of the two alternative theories, led to the justification of interaction theory.

Comparisons with Traditional Research

Positivist case research, aimed at hypotheses testing, is often criticized by natural science researchers as lacking in controlled observations, controlled deductions, replicability, and generalizability of findings – the traditional principles of positivist research. However, these criticisms can be overcome through appropriate case research designs. For instance, the problem of controlled observations refers to the difficulty of obtaining experimental or statistical control in case research. However, case researchers can compensate for such lack of controls by employing “natural controls.” This natural control in Markus’ (1983) study was the corporate accountant who was one of the system advocates initially, but started resisting it once he moved to controlling division. In this instance, the change in his behavior may be attributed to his new divisional position. However, such natural controls cannot be anticipated in advance, and case researchers may overlook then unless they are proactively looking for such controls. Incidentally, natural controls are also used in natural science disciplines such as astronomy, geology, and human biology, such as wait for comets to pass close enough to the earth in order to make inferences about comets and their composition.

The problem of controlled deduction refers to the lack of adequate quantitative evidence to support inferences, given the mostly qualitative nature of case research data. Despite the lack of quantitative data for hypotheses testing (e.g., t-tests), controlled deductions can still be obtained in case research by generating behavioral predictions based on theoretical considerations and testing those predictions over time. Markus employed this strategy in her study by generating three alternative theoretical hypotheses for user resistance, and rejecting two of those predictions when they did not match with actual observed behavior. In this case, the hypotheses were tested using logical propositions rather than using mathematical tests, which are just as valid as statistical inferences since mathematics is a subset of logic.

Third, the problem of replicability refers to the difficulty of observing the same phenomenon given the uniqueness and idiosyncrasy of a given case site. However, using Markus’ three theories as an illustration, a different researcher can test the same theories at a different case site, where three different predictions may emerge based on the idiosyncratic nature of the new case site, and the three resulting predictions may be tested accordingly. In other words, it is possible to replicate the inferences of case research, even if the case research site or context may not be replicable.

Fourth, case research tends to examine unique and non-replicable phenomena that may not be generalized to other settings. Generalizability in natural sciences is established through additional studies. Likewise, additional case studies conducted in different contexts with different predictions can establish generalizability of findings if such findings are observed to be consistent across studies.

Lastly, British philosopher Karl Popper described four requirements of scientific theories: (1) theories should be falsifiable, (2) they should be logically consistent, (3) they should have adequate predictive ability, and (4) they should provide better explanation than rival theories. In case research, the first three requirements can be increased by increasing the degrees of freedom of observed findings, such as by increasing the number of case sites, the number of alternative predictions, and the number of levels of analysis examined. This was accomplished in Markus’ study by examining the behavior of multiple groups (divisional accountants and corporate accountants) and providing multiple (three) rival explanations.

Popper’s fourth condition was accomplished in this study when one hypothesis was found to match observed evidence better than the two rival hypotheses.

[8] Benbasat, I., Goldstein, D. K., and Mead, M. (1987). “The Case Research Strategy in Studies of Information Systems,” MIS Quarterly (11:3), 369-386.

[9] Yin, R. K. (2002), Case Study Research: Design and Methods . Thousand Oaks, CA: Sage Publications.

[10] Eisenhardt, K. M. (1989). “Building Theories from Case Research,” Academy of Management Review

(14:4), 532-550.

[11] Eisenhardt, K. M. (1989). “Making Fast Strategic Decisions in High-Velocity Environments,” Academy of Management Journal (32:3), 543-576.

[12] Markus, M. L. (1983). “Power, Politics, and MIS Implementation,” Communications of the ACM (26:6), 430-444.

• Social Science Research: Principles, Methods, and Practices. Authored by : Anol Bhattacherjee. Provided by : University of South Florida. Located at : http://scholarcommons.usf.edu/oa_textbooks/3/ . License : CC BY-NC-SA: Attribution-NonCommercial-ShareAlike

Case Study Research Method in Psychology

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Case studies are in-depth investigations of a person, group, event, or community. Typically, data is gathered from various sources using several methods (e.g., observations & interviews).

The case study research method originated in clinical medicine (the case history, i.e., the patient’s personal history). In psychology, case studies are often confined to the study of a particular individual.

The information is mainly biographical and relates to events in the individual’s past (i.e., retrospective), as well as to significant events that are currently occurring in his or her everyday life.

The case study is not a research method, but researchers select methods of data collection and analysis that will generate material suitable for case studies.

Freud (1909a, 1909b) conducted very detailed investigations into the private lives of his patients in an attempt to both understand and help them overcome their illnesses.

This makes it clear that the case study is a method that should only be used by a psychologist, therapist, or psychiatrist, i.e., someone with a professional qualification.

There is an ethical issue of competence. Only someone qualified to diagnose and treat a person can conduct a formal case study relating to atypical (i.e., abnormal) behavior or atypical development.

 Famous Case Studies

• Anna O – One of the most famous case studies, documenting psychoanalyst Josef Breuer’s treatment of “Anna O” (real name Bertha Pappenheim) for hysteria in the late 1800s using early psychoanalytic theory.
• Little Hans – A child psychoanalysis case study published by Sigmund Freud in 1909 analyzing his five-year-old patient Herbert Graf’s house phobia as related to the Oedipus complex.
• Bruce/Brenda – Gender identity case of the boy (Bruce) whose botched circumcision led psychologist John Money to advise gender reassignment and raise him as a girl (Brenda) in the 1960s.
• Genie Wiley – Linguistics/psychological development case of the victim of extreme isolation abuse who was studied in 1970s California for effects of early language deprivation on acquiring speech later in life.
• Phineas Gage – One of the most famous neuropsychology case studies analyzes personality changes in railroad worker Phineas Gage after an 1848 brain injury involving a tamping iron piercing his skull.

Clinical Case Studies

• Studying the effectiveness of psychotherapy approaches with an individual patient
• Assessing and treating mental illnesses like depression, anxiety disorders, PTSD
• Neuropsychological cases investigating brain injuries or disorders

Child Psychology Case Studies

• Studying psychological development from birth through adolescence
• Cases of learning disabilities, autism spectrum disorders, ADHD
• Effects of trauma, abuse, deprivation on development

Types of Case Studies

• Explanatory case studies : Used to explore causation in order to find underlying principles. Helpful for doing qualitative analysis to explain presumed causal links.
• Exploratory case studies : Used to explore situations where an intervention being evaluated has no clear set of outcomes. It helps define questions and hypotheses for future research.
• Descriptive case studies : Describe an intervention or phenomenon and the real-life context in which it occurred. It is helpful for illustrating certain topics within an evaluation.
• Multiple-case studies : Used to explore differences between cases and replicate findings across cases. Helpful for comparing and contrasting specific cases.
• Intrinsic : Used to gain a better understanding of a particular case. Helpful for capturing the complexity of a single case.
• Collective : Used to explore a general phenomenon using multiple case studies. Helpful for jointly studying a group of cases in order to inquire into the phenomenon.

Where Do You Find Data for a Case Study?

There are several places to find data for a case study. The key is to gather data from multiple sources to get a complete picture of the case and corroborate facts or findings through triangulation of evidence. Most of this information is likely qualitative (i.e., verbal description rather than measurement), but the psychologist might also collect numerical data.

1. Primary sources

• Interviews – Interviewing key people related to the case to get their perspectives and insights. The interview is an extremely effective procedure for obtaining information about an individual, and it may be used to collect comments from the person’s friends, parents, employer, workmates, and others who have a good knowledge of the person, as well as to obtain facts from the person him or herself.
• Observations – Observing behaviors, interactions, processes, etc., related to the case as they unfold in real-time.
• Documents & Records – Reviewing private documents, diaries, public records, correspondence, meeting minutes, etc., relevant to the case.

2. Secondary sources

• News/Media – News coverage of events related to the case study.
• Academic articles – Journal articles, dissertations etc. that discuss the case.
• Government reports – Official data and records related to the case context.
• Books/films – Books, documentaries or films discussing the case.

3. Archival records

Searching historical archives, museum collections and databases to find relevant documents, visual/audio records related to the case history and context.

Public archives like newspapers, organizational records, photographic collections could all include potentially relevant pieces of information to shed light on attitudes, cultural perspectives, common practices and historical contexts related to psychology.

4. Organizational records

Organizational records offer the advantage of often having large datasets collected over time that can reveal or confirm psychological insights.

Of course, privacy and ethical concerns regarding confidential data must be navigated carefully.

However, with proper protocols, organizational records can provide invaluable context and empirical depth to qualitative case studies exploring the intersection of psychology and organizations.

• Organizational/industrial psychology research : Organizational records like employee surveys, turnover/retention data, policies, incident reports etc. may provide insight into topics like job satisfaction, workplace culture and dynamics, leadership issues, employee behaviors etc.
• Clinical psychology : Therapists/hospitals may grant access to anonymized medical records to study aspects like assessments, diagnoses, treatment plans etc. This could shed light on clinical practices.
• School psychology : Studies could utilize anonymized student records like test scores, grades, disciplinary issues, and counseling referrals to study child development, learning barriers, effectiveness of support programs, and more.

How do I Write a Case Study in Psychology?

Follow specified case study guidelines provided by a journal or your psychology tutor. General components of clinical case studies include: background, symptoms, assessments, diagnosis, treatment, and outcomes. Interpreting the information means the researcher decides what to include or leave out. A good case study should always clarify which information is the factual description and which is an inference or the researcher’s opinion.

1. Introduction

• Provide background on the case context and why it is of interest, presenting background information like demographics, relevant history, and presenting problem.
• Compare briefly to similar published cases if applicable. Clearly state the focus/importance of the case.

2. Case Presentation

• Describe the presenting problem in detail, including symptoms, duration,and impact on daily life.
• Include client demographics like age and gender, information about social relationships, and mental health history.
• Describe all physical, emotional, and/or sensory symptoms reported by the client.
• Use patient quotes to describe the initial complaint verbatim. Follow with full-sentence summaries of relevant history details gathered, including key components that led to a working diagnosis.
• Summarize clinical exam results, namely orthopedic/neurological tests, imaging, lab tests, etc. Note actual results rather than subjective conclusions. Provide images if clearly reproducible/anonymized.
• Clearly state the working diagnosis or clinical impression before transitioning to management.

3. Management and Outcome

• Indicate the total duration of care and number of treatments given over what timeframe. Use specific names/descriptions for any therapies/interventions applied.
• Present the results of the intervention,including any quantitative or qualitative data collected.
• For outcomes, utilize visual analog scales for pain, medication usage logs, etc., if possible. Include patient self-reports of improvement/worsening of symptoms. Note the reason for discharge/end of care.

4. Discussion

• Analyze the case, exploring contributing factors, limitations of the study, and connections to existing research.
• Analyze the effectiveness of the intervention,considering factors like participant adherence, limitations of the study, and potential alternative explanations for the results.
• Identify any questions raised in the case analysis and relate insights to established theories and current research if applicable. Avoid definitive claims about physiological explanations.
• Offer clinical implications, and suggest future research directions.

5. Additional Items

• Thank specific assistants for writing support only. No patient acknowledgments.
• References should directly support any key claims or quotes included.
• Use tables/figures/images only if substantially informative. Include permissions and legends/explanatory notes.
• Provides detailed (rich qualitative) information.
• Provides insight for further research.
• Permitting investigation of otherwise impractical (or unethical) situations.

Case studies allow a researcher to investigate a topic in far more detail than might be possible if they were trying to deal with a large number of research participants (nomothetic approach) with the aim of ‘averaging’.

Because of their in-depth, multi-sided approach, case studies often shed light on aspects of human thinking and behavior that would be unethical or impractical to study in other ways.

Research that only looks into the measurable aspects of human behavior is not likely to give us insights into the subjective dimension of experience, which is important to psychoanalytic and humanistic psychologists.

Case studies are often used in exploratory research. They can help us generate new ideas (that might be tested by other methods). They are an important way of illustrating theories and can help show how different aspects of a person’s life are related to each other.

The method is, therefore, important for psychologists who adopt a holistic point of view (i.e., humanistic psychologists ).

Limitations

• Lacking scientific rigor and providing little basis for generalization of results to the wider population.
• Researchers’ own subjective feelings may influence the case study (researcher bias).
• Difficult to replicate.
• Time-consuming and expensive.
• The volume of data, together with the time restrictions in place, impacted the depth of analysis that was possible within the available resources.

Because a case study deals with only one person/event/group, we can never be sure if the case study investigated is representative of the wider body of “similar” instances. This means the conclusions drawn from a particular case may not be transferable to other settings.

Because case studies are based on the analysis of qualitative (i.e., descriptive) data , a lot depends on the psychologist’s interpretation of the information she has acquired.

This means that there is a lot of scope for Anna O , and it could be that the subjective opinions of the psychologist intrude in the assessment of what the data means.

For example, Freud has been criticized for producing case studies in which the information was sometimes distorted to fit particular behavioral theories (e.g., Little Hans ).

This is also true of Money’s interpretation of the Bruce/Brenda case study (Diamond, 1997) when he ignored evidence that went against his theory.

Breuer, J., & Freud, S. (1895).  Studies on hysteria . Standard Edition 2: London.

Curtiss, S. (1981). Genie: The case of a modern wild child .

Diamond, M., & Sigmundson, K. (1997). Sex Reassignment at Birth: Long-term Review and Clinical Implications. Archives of Pediatrics & Adolescent Medicine , 151(3), 298-304

Freud, S. (1909a). Analysis of a phobia of a five year old boy. In The Pelican Freud Library (1977), Vol 8, Case Histories 1, pages 169-306

Freud, S. (1909b). Bemerkungen über einen Fall von Zwangsneurose (Der “Rattenmann”). Jb. psychoanal. psychopathol. Forsch ., I, p. 357-421; GW, VII, p. 379-463; Notes upon a case of obsessional neurosis, SE , 10: 151-318.

Harlow J. M. (1848). Passage of an iron rod through the head.  Boston Medical and Surgical Journal, 39 , 389–393.

Harlow, J. M. (1868).  Recovery from the Passage of an Iron Bar through the Head .  Publications of the Massachusetts Medical Society. 2  (3), 327-347.

Money, J., & Ehrhardt, A. A. (1972).  Man & Woman, Boy & Girl : The Differentiation and Dimorphism of Gender Identity from Conception to Maturity. Baltimore, Maryland: Johns Hopkins University Press.

Money, J., & Tucker, P. (1975). Sexual signatures: On being a man or a woman.

Further Information

• Case Study Approach
• Case Study Method
• Enhancing the Quality of Case Studies in Health Services Research
• “We do things together” A case study of “couplehood” in dementia
• Using mixed methods for evaluating an integrative approach to cancer care: a case study

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• BMC Med Res Methodol

The case study approach

Sarah crowe.

1 Division of Primary Care, The University of Nottingham, Nottingham, UK

Kathrin Cresswell

2 Centre for Population Health Sciences, The University of Edinburgh, Edinburgh, UK

Ann Robertson

3 School of Health in Social Science, The University of Edinburgh, Edinburgh, UK

Anthony Avery

Aziz sheikh.

The case study approach allows in-depth, multi-faceted explorations of complex issues in their real-life settings. The value of the case study approach is well recognised in the fields of business, law and policy, but somewhat less so in health services research. Based on our experiences of conducting several health-related case studies, we reflect on the different types of case study design, the specific research questions this approach can help answer, the data sources that tend to be used, and the particular advantages and disadvantages of employing this methodological approach. The paper concludes with key pointers to aid those designing and appraising proposals for conducting case study research, and a checklist to help readers assess the quality of case study reports.

Introduction

The case study approach is particularly useful to employ when there is a need to obtain an in-depth appreciation of an issue, event or phenomenon of interest, in its natural real-life context. Our aim in writing this piece is to provide insights into when to consider employing this approach and an overview of key methodological considerations in relation to the design, planning, analysis, interpretation and reporting of case studies.

The illustrative 'grand round', 'case report' and 'case series' have a long tradition in clinical practice and research. Presenting detailed critiques, typically of one or more patients, aims to provide insights into aspects of the clinical case and, in doing so, illustrate broader lessons that may be learnt. In research, the conceptually-related case study approach can be used, for example, to describe in detail a patient's episode of care, explore professional attitudes to and experiences of a new policy initiative or service development or more generally to 'investigate contemporary phenomena within its real-life context' [ 1 ]. Based on our experiences of conducting a range of case studies, we reflect on when to consider using this approach, discuss the key steps involved and illustrate, with examples, some of the practical challenges of attaining an in-depth understanding of a 'case' as an integrated whole. In keeping with previously published work, we acknowledge the importance of theory to underpin the design, selection, conduct and interpretation of case studies[ 2 ]. In so doing, we make passing reference to the different epistemological approaches used in case study research by key theoreticians and methodologists in this field of enquiry.

This paper is structured around the following main questions: What is a case study? What are case studies used for? How are case studies conducted? What are the potential pitfalls and how can these be avoided? We draw in particular on four of our own recently published examples of case studies (see Tables ​ Tables1, 1 , ​ ,2, 2 , ​ ,3 3 and ​ and4) 4 ) and those of others to illustrate our discussion[ 3 - 7 ].

Example of a case study investigating the reasons for differences in recruitment rates of minority ethnic people in asthma research[ 3 ]

Example of a case study investigating the process of planning and implementing a service in Primary Care Organisations[ 4 ]

Example of a case study investigating the introduction of the electronic health records[ 5 ]

Example of a case study investigating the formal and informal ways students learn about patient safety[ 6 ]

What is a case study?

A case study is a research approach that is used to generate an in-depth, multi-faceted understanding of a complex issue in its real-life context. It is an established research design that is used extensively in a wide variety of disciplines, particularly in the social sciences. A case study can be defined in a variety of ways (Table ​ (Table5), 5 ), the central tenet being the need to explore an event or phenomenon in depth and in its natural context. It is for this reason sometimes referred to as a "naturalistic" design; this is in contrast to an "experimental" design (such as a randomised controlled trial) in which the investigator seeks to exert control over and manipulate the variable(s) of interest.

Definitions of a case study

Stake's work has been particularly influential in defining the case study approach to scientific enquiry. He has helpfully characterised three main types of case study: intrinsic , instrumental and collective [ 8 ]. An intrinsic case study is typically undertaken to learn about a unique phenomenon. The researcher should define the uniqueness of the phenomenon, which distinguishes it from all others. In contrast, the instrumental case study uses a particular case (some of which may be better than others) to gain a broader appreciation of an issue or phenomenon. The collective case study involves studying multiple cases simultaneously or sequentially in an attempt to generate a still broader appreciation of a particular issue.

These are however not necessarily mutually exclusive categories. In the first of our examples (Table ​ (Table1), 1 ), we undertook an intrinsic case study to investigate the issue of recruitment of minority ethnic people into the specific context of asthma research studies, but it developed into a instrumental case study through seeking to understand the issue of recruitment of these marginalised populations more generally, generating a number of the findings that are potentially transferable to other disease contexts[ 3 ]. In contrast, the other three examples (see Tables ​ Tables2, 2 , ​ ,3 3 and ​ and4) 4 ) employed collective case study designs to study the introduction of workforce reconfiguration in primary care, the implementation of electronic health records into hospitals, and to understand the ways in which healthcare students learn about patient safety considerations[ 4 - 6 ]. Although our study focusing on the introduction of General Practitioners with Specialist Interests (Table ​ (Table2) 2 ) was explicitly collective in design (four contrasting primary care organisations were studied), is was also instrumental in that this particular professional group was studied as an exemplar of the more general phenomenon of workforce redesign[ 4 ].

What are case studies used for?

According to Yin, case studies can be used to explain, describe or explore events or phenomena in the everyday contexts in which they occur[ 1 ]. These can, for example, help to understand and explain causal links and pathways resulting from a new policy initiative or service development (see Tables ​ Tables2 2 and ​ and3, 3 , for example)[ 1 ]. In contrast to experimental designs, which seek to test a specific hypothesis through deliberately manipulating the environment (like, for example, in a randomised controlled trial giving a new drug to randomly selected individuals and then comparing outcomes with controls),[ 9 ] the case study approach lends itself well to capturing information on more explanatory ' how ', 'what' and ' why ' questions, such as ' how is the intervention being implemented and received on the ground?'. The case study approach can offer additional insights into what gaps exist in its delivery or why one implementation strategy might be chosen over another. This in turn can help develop or refine theory, as shown in our study of the teaching of patient safety in undergraduate curricula (Table ​ (Table4 4 )[ 6 , 10 ]. Key questions to consider when selecting the most appropriate study design are whether it is desirable or indeed possible to undertake a formal experimental investigation in which individuals and/or organisations are allocated to an intervention or control arm? Or whether the wish is to obtain a more naturalistic understanding of an issue? The former is ideally studied using a controlled experimental design, whereas the latter is more appropriately studied using a case study design.

Case studies may be approached in different ways depending on the epistemological standpoint of the researcher, that is, whether they take a critical (questioning one's own and others' assumptions), interpretivist (trying to understand individual and shared social meanings) or positivist approach (orientating towards the criteria of natural sciences, such as focusing on generalisability considerations) (Table ​ (Table6). 6 ). Whilst such a schema can be conceptually helpful, it may be appropriate to draw on more than one approach in any case study, particularly in the context of conducting health services research. Doolin has, for example, noted that in the context of undertaking interpretative case studies, researchers can usefully draw on a critical, reflective perspective which seeks to take into account the wider social and political environment that has shaped the case[ 11 ].

Example of epistemological approaches that may be used in case study research

How are case studies conducted?

Here, we focus on the main stages of research activity when planning and undertaking a case study; the crucial stages are: defining the case; selecting the case(s); collecting and analysing the data; interpreting data; and reporting the findings.

Defining the case

Carefully formulated research question(s), informed by the existing literature and a prior appreciation of the theoretical issues and setting(s), are all important in appropriately and succinctly defining the case[ 8 , 12 ]. Crucially, each case should have a pre-defined boundary which clarifies the nature and time period covered by the case study (i.e. its scope, beginning and end), the relevant social group, organisation or geographical area of interest to the investigator, the types of evidence to be collected, and the priorities for data collection and analysis (see Table ​ Table7 7 )[ 1 ]. A theory driven approach to defining the case may help generate knowledge that is potentially transferable to a range of clinical contexts and behaviours; using theory is also likely to result in a more informed appreciation of, for example, how and why interventions have succeeded or failed[ 13 ].

Example of a checklist for rating a case study proposal[ 8 ]

For example, in our evaluation of the introduction of electronic health records in English hospitals (Table ​ (Table3), 3 ), we defined our cases as the NHS Trusts that were receiving the new technology[ 5 ]. Our focus was on how the technology was being implemented. However, if the primary research interest had been on the social and organisational dimensions of implementation, we might have defined our case differently as a grouping of healthcare professionals (e.g. doctors and/or nurses). The precise beginning and end of the case may however prove difficult to define. Pursuing this same example, when does the process of implementation and adoption of an electronic health record system really begin or end? Such judgements will inevitably be influenced by a range of factors, including the research question, theory of interest, the scope and richness of the gathered data and the resources available to the research team.

Selecting the case(s)

The decision on how to select the case(s) to study is a very important one that merits some reflection. In an intrinsic case study, the case is selected on its own merits[ 8 ]. The case is selected not because it is representative of other cases, but because of its uniqueness, which is of genuine interest to the researchers. This was, for example, the case in our study of the recruitment of minority ethnic participants into asthma research (Table ​ (Table1) 1 ) as our earlier work had demonstrated the marginalisation of minority ethnic people with asthma, despite evidence of disproportionate asthma morbidity[ 14 , 15 ]. In another example of an intrinsic case study, Hellstrom et al.[ 16 ] studied an elderly married couple living with dementia to explore how dementia had impacted on their understanding of home, their everyday life and their relationships.

For an instrumental case study, selecting a "typical" case can work well[ 8 ]. In contrast to the intrinsic case study, the particular case which is chosen is of less importance than selecting a case that allows the researcher to investigate an issue or phenomenon. For example, in order to gain an understanding of doctors' responses to health policy initiatives, Som undertook an instrumental case study interviewing clinicians who had a range of responsibilities for clinical governance in one NHS acute hospital trust[ 17 ]. Sampling a "deviant" or "atypical" case may however prove even more informative, potentially enabling the researcher to identify causal processes, generate hypotheses and develop theory.

In collective or multiple case studies, a number of cases are carefully selected. This offers the advantage of allowing comparisons to be made across several cases and/or replication. Choosing a "typical" case may enable the findings to be generalised to theory (i.e. analytical generalisation) or to test theory by replicating the findings in a second or even a third case (i.e. replication logic)[ 1 ]. Yin suggests two or three literal replications (i.e. predicting similar results) if the theory is straightforward and five or more if the theory is more subtle. However, critics might argue that selecting 'cases' in this way is insufficiently reflexive and ill-suited to the complexities of contemporary healthcare organisations.

The selected case study site(s) should allow the research team access to the group of individuals, the organisation, the processes or whatever else constitutes the chosen unit of analysis for the study. Access is therefore a central consideration; the researcher needs to come to know the case study site(s) well and to work cooperatively with them. Selected cases need to be not only interesting but also hospitable to the inquiry [ 8 ] if they are to be informative and answer the research question(s). Case study sites may also be pre-selected for the researcher, with decisions being influenced by key stakeholders. For example, our selection of case study sites in the evaluation of the implementation and adoption of electronic health record systems (see Table ​ Table3) 3 ) was heavily influenced by NHS Connecting for Health, the government agency that was responsible for overseeing the National Programme for Information Technology (NPfIT)[ 5 ]. This prominent stakeholder had already selected the NHS sites (through a competitive bidding process) to be early adopters of the electronic health record systems and had negotiated contracts that detailed the deployment timelines.

It is also important to consider in advance the likely burden and risks associated with participation for those who (or the site(s) which) comprise the case study. Of particular importance is the obligation for the researcher to think through the ethical implications of the study (e.g. the risk of inadvertently breaching anonymity or confidentiality) and to ensure that potential participants/participating sites are provided with sufficient information to make an informed choice about joining the study. The outcome of providing this information might be that the emotive burden associated with participation, or the organisational disruption associated with supporting the fieldwork, is considered so high that the individuals or sites decide against participation.

In our example of evaluating implementations of electronic health record systems, given the restricted number of early adopter sites available to us, we sought purposively to select a diverse range of implementation cases among those that were available[ 5 ]. We chose a mixture of teaching, non-teaching and Foundation Trust hospitals, and examples of each of the three electronic health record systems procured centrally by the NPfIT. At one recruited site, it quickly became apparent that access was problematic because of competing demands on that organisation. Recognising the importance of full access and co-operative working for generating rich data, the research team decided not to pursue work at that site and instead to focus on other recruited sites.

Collecting the data

In order to develop a thorough understanding of the case, the case study approach usually involves the collection of multiple sources of evidence, using a range of quantitative (e.g. questionnaires, audits and analysis of routinely collected healthcare data) and more commonly qualitative techniques (e.g. interviews, focus groups and observations). The use of multiple sources of data (data triangulation) has been advocated as a way of increasing the internal validity of a study (i.e. the extent to which the method is appropriate to answer the research question)[ 8 , 18 - 21 ]. An underlying assumption is that data collected in different ways should lead to similar conclusions, and approaching the same issue from different angles can help develop a holistic picture of the phenomenon (Table ​ (Table2 2 )[ 4 ].

Brazier and colleagues used a mixed-methods case study approach to investigate the impact of a cancer care programme[ 22 ]. Here, quantitative measures were collected with questionnaires before, and five months after, the start of the intervention which did not yield any statistically significant results. Qualitative interviews with patients however helped provide an insight into potentially beneficial process-related aspects of the programme, such as greater, perceived patient involvement in care. The authors reported how this case study approach provided a number of contextual factors likely to influence the effectiveness of the intervention and which were not likely to have been obtained from quantitative methods alone.

In collective or multiple case studies, data collection needs to be flexible enough to allow a detailed description of each individual case to be developed (e.g. the nature of different cancer care programmes), before considering the emerging similarities and differences in cross-case comparisons (e.g. to explore why one programme is more effective than another). It is important that data sources from different cases are, where possible, broadly comparable for this purpose even though they may vary in nature and depth.

Analysing, interpreting and reporting case studies

Making sense and offering a coherent interpretation of the typically disparate sources of data (whether qualitative alone or together with quantitative) is far from straightforward. Repeated reviewing and sorting of the voluminous and detail-rich data are integral to the process of analysis. In collective case studies, it is helpful to analyse data relating to the individual component cases first, before making comparisons across cases. Attention needs to be paid to variations within each case and, where relevant, the relationship between different causes, effects and outcomes[ 23 ]. Data will need to be organised and coded to allow the key issues, both derived from the literature and emerging from the dataset, to be easily retrieved at a later stage. An initial coding frame can help capture these issues and can be applied systematically to the whole dataset with the aid of a qualitative data analysis software package.

The Framework approach is a practical approach, comprising of five stages (familiarisation; identifying a thematic framework; indexing; charting; mapping and interpretation) , to managing and analysing large datasets particularly if time is limited, as was the case in our study of recruitment of South Asians into asthma research (Table ​ (Table1 1 )[ 3 , 24 ]. Theoretical frameworks may also play an important role in integrating different sources of data and examining emerging themes. For example, we drew on a socio-technical framework to help explain the connections between different elements - technology; people; and the organisational settings within which they worked - in our study of the introduction of electronic health record systems (Table ​ (Table3 3 )[ 5 ]. Our study of patient safety in undergraduate curricula drew on an evaluation-based approach to design and analysis, which emphasised the importance of the academic, organisational and practice contexts through which students learn (Table ​ (Table4 4 )[ 6 ].

Case study findings can have implications both for theory development and theory testing. They may establish, strengthen or weaken historical explanations of a case and, in certain circumstances, allow theoretical (as opposed to statistical) generalisation beyond the particular cases studied[ 12 ]. These theoretical lenses should not, however, constitute a strait-jacket and the cases should not be "forced to fit" the particular theoretical framework that is being employed.

When reporting findings, it is important to provide the reader with enough contextual information to understand the processes that were followed and how the conclusions were reached. In a collective case study, researchers may choose to present the findings from individual cases separately before amalgamating across cases. Care must be taken to ensure the anonymity of both case sites and individual participants (if agreed in advance) by allocating appropriate codes or withholding descriptors. In the example given in Table ​ Table3, 3 , we decided against providing detailed information on the NHS sites and individual participants in order to avoid the risk of inadvertent disclosure of identities[ 5 , 25 ].

What are the potential pitfalls and how can these be avoided?

The case study approach is, as with all research, not without its limitations. When investigating the formal and informal ways undergraduate students learn about patient safety (Table ​ (Table4), 4 ), for example, we rapidly accumulated a large quantity of data. The volume of data, together with the time restrictions in place, impacted on the depth of analysis that was possible within the available resources. This highlights a more general point of the importance of avoiding the temptation to collect as much data as possible; adequate time also needs to be set aside for data analysis and interpretation of what are often highly complex datasets.

Case study research has sometimes been criticised for lacking scientific rigour and providing little basis for generalisation (i.e. producing findings that may be transferable to other settings)[ 1 ]. There are several ways to address these concerns, including: the use of theoretical sampling (i.e. drawing on a particular conceptual framework); respondent validation (i.e. participants checking emerging findings and the researcher's interpretation, and providing an opinion as to whether they feel these are accurate); and transparency throughout the research process (see Table ​ Table8 8 )[ 8 , 18 - 21 , 23 , 26 ]. Transparency can be achieved by describing in detail the steps involved in case selection, data collection, the reasons for the particular methods chosen, and the researcher's background and level of involvement (i.e. being explicit about how the researcher has influenced data collection and interpretation). Seeking potential, alternative explanations, and being explicit about how interpretations and conclusions were reached, help readers to judge the trustworthiness of the case study report. Stake provides a critique checklist for a case study report (Table ​ (Table9 9 )[ 8 ].

Potential pitfalls and mitigating actions when undertaking case study research

Stake's checklist for assessing the quality of a case study report[ 8 ]

Conclusions

The case study approach allows, amongst other things, critical events, interventions, policy developments and programme-based service reforms to be studied in detail in a real-life context. It should therefore be considered when an experimental design is either inappropriate to answer the research questions posed or impossible to undertake. Considering the frequency with which implementations of innovations are now taking place in healthcare settings and how well the case study approach lends itself to in-depth, complex health service research, we believe this approach should be more widely considered by researchers. Though inherently challenging, the research case study can, if carefully conceptualised and thoughtfully undertaken and reported, yield powerful insights into many important aspects of health and healthcare delivery.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

AS conceived this article. SC, KC and AR wrote this paper with GH, AA and AS all commenting on various drafts. SC and AS are guarantors.

Pre-publication history

The pre-publication history for this paper can be accessed here:

http://www.biomedcentral.com/1471-2288/11/100/prepub

Acknowledgements

We are grateful to the participants and colleagues who contributed to the individual case studies that we have drawn on. This work received no direct funding, but it has been informed by projects funded by Asthma UK, the NHS Service Delivery Organisation, NHS Connecting for Health Evaluation Programme, and Patient Safety Research Portfolio. We would also like to thank the expert reviewers for their insightful and constructive feedback. Our thanks are also due to Dr. Allison Worth who commented on an earlier draft of this manuscript.

• Yin RK. Case study research, design and method. 4. London: Sage Publications Ltd.; 2009. [ Google Scholar ]
• Keen J, Packwood T. Qualitative research; case study evaluation. BMJ. 1995; 311 :444–446. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Sheikh A, Halani L, Bhopal R, Netuveli G, Partridge M, Car J. et al. Facilitating the Recruitment of Minority Ethnic People into Research: Qualitative Case Study of South Asians and Asthma. PLoS Med. 2009; 6 (10):1–11. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Pinnock H, Huby G, Powell A, Kielmann T, Price D, Williams S, The process of planning, development and implementation of a General Practitioner with a Special Interest service in Primary Care Organisations in England and Wales: a comparative prospective case study. Report for the National Co-ordinating Centre for NHS Service Delivery and Organisation R&D (NCCSDO) 2008. http://www.sdo.nihr.ac.uk/files/project/99-final-report.pdf
• Robertson A, Cresswell K, Takian A, Petrakaki D, Crowe S, Cornford T. et al. Prospective evaluation of the implementation and adoption of NHS Connecting for Health's national electronic health record in secondary care in England: interim findings. BMJ. 2010; 41 :c4564. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Pearson P, Steven A, Howe A, Sheikh A, Ashcroft D, Smith P. the Patient Safety Education Study Group. Learning about patient safety: organisational context and culture in the education of healthcare professionals. J Health Serv Res Policy. 2010; 15 :4–10. doi: 10.1258/jhsrp.2009.009052. [ PubMed ] [ CrossRef ] [ Google Scholar ]
• van Harten WH, Casparie TF, Fisscher OA. The evaluation of the introduction of a quality management system: a process-oriented case study in a large rehabilitation hospital. Health Policy. 2002; 60 (1):17–37. doi: 10.1016/S0168-8510(01)00187-7. [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Stake RE. The art of case study research. London: Sage Publications Ltd.; 1995. [ Google Scholar ]
• Sheikh A, Smeeth L, Ashcroft R. Randomised controlled trials in primary care: scope and application. Br J Gen Pract. 2002; 52 (482):746–51. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• King G, Keohane R, Verba S. Designing Social Inquiry. Princeton: Princeton University Press; 1996. [ Google Scholar ]
• Doolin B. Information technology as disciplinary technology: being critical in interpretative research on information systems. Journal of Information Technology. 1998; 13 :301–311. doi: 10.1057/jit.1998.8. [ CrossRef ] [ Google Scholar ]
• George AL, Bennett A. Case studies and theory development in the social sciences. Cambridge, MA: MIT Press; 2005. [ Google Scholar ]
• Eccles M. the Improved Clinical Effectiveness through Behavioural Research Group (ICEBeRG) Designing theoretically-informed implementation interventions. Implementation Science. 2006; 1 :1–8. doi: 10.1186/1748-5908-1-1. [ PMC free article ] [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Netuveli G, Hurwitz B, Levy M, Fletcher M, Barnes G, Durham SR, Sheikh A. Ethnic variations in UK asthma frequency, morbidity, and health-service use: a systematic review and meta-analysis. Lancet. 2005; 365 (9456):312–7. [ PubMed ] [ Google Scholar ]
• Sheikh A, Panesar SS, Lasserson T, Netuveli G. Recruitment of ethnic minorities to asthma studies. Thorax. 2004; 59 (7):634. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Hellström I, Nolan M, Lundh U. 'We do things together': A case study of 'couplehood' in dementia. Dementia. 2005; 4 :7–22. doi: 10.1177/1471301205049188. [ CrossRef ] [ Google Scholar ]
• Som CV. Nothing seems to have changed, nothing seems to be changing and perhaps nothing will change in the NHS: doctors' response to clinical governance. International Journal of Public Sector Management. 2005; 18 :463–477. doi: 10.1108/09513550510608903. [ CrossRef ] [ Google Scholar ]
• Lincoln Y, Guba E. Naturalistic inquiry. Newbury Park: Sage Publications; 1985. [ Google Scholar ]
• Barbour RS. Checklists for improving rigour in qualitative research: a case of the tail wagging the dog? BMJ. 2001; 322 :1115–1117. doi: 10.1136/bmj.322.7294.1115. [ PMC free article ] [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Mays N, Pope C. Qualitative research in health care: Assessing quality in qualitative research. BMJ. 2000; 320 :50–52. doi: 10.1136/bmj.320.7226.50. [ PMC free article ] [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Mason J. Qualitative researching. London: Sage; 2002. [ Google Scholar ]
• Brazier A, Cooke K, Moravan V. Using Mixed Methods for Evaluating an Integrative Approach to Cancer Care: A Case Study. Integr Cancer Ther. 2008; 7 :5–17. doi: 10.1177/1534735407313395. [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Miles MB, Huberman M. Qualitative data analysis: an expanded sourcebook. 2. CA: Sage Publications Inc.; 1994. [ Google Scholar ]
• Pope C, Ziebland S, Mays N. Analysing qualitative data. Qualitative research in health care. BMJ. 2000; 320 :114–116. doi: 10.1136/bmj.320.7227.114. [ PMC free article ] [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Cresswell KM, Worth A, Sheikh A. Actor-Network Theory and its role in understanding the implementation of information technology developments in healthcare. BMC Med Inform Decis Mak. 2010; 10 (1):67. doi: 10.1186/1472-6947-10-67. [ PMC free article ] [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Malterud K. Qualitative research: standards, challenges, and guidelines. Lancet. 2001; 358 :483–488. doi: 10.1016/S0140-6736(01)05627-6. [ PubMed ] [ CrossRef ] [ Google Scholar ]
• Yin R. Case study research: design and methods. 2. Thousand Oaks, CA: Sage Publishing; 1994. [ Google Scholar ]
• Yin R. Enhancing the quality of case studies in health services research. Health Serv Res. 1999; 34 :1209–1224. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Green J, Thorogood N. Qualitative methods for health research. 2. Los Angeles: Sage; 2009. [ Google Scholar ]
• Howcroft D, Trauth E. Handbook of Critical Information Systems Research, Theory and Application. Cheltenham, UK: Northampton, MA, USA: Edward Elgar; 2005. [ Google Scholar ]
• Blakie N. Approaches to Social Enquiry. Cambridge: Polity Press; 1993. [ Google Scholar ]
• Doolin B. Power and resistance in the implementation of a medical management information system. Info Systems J. 2004; 14 :343–362. doi: 10.1111/j.1365-2575.2004.00176.x. [ CrossRef ] [ Google Scholar ]
• Bloomfield BP, Best A. Management consultants: systems development, power and the translation of problems. Sociological Review. 1992; 40 :533–560. [ Google Scholar ]
• Shanks G, Parr A. Proceedings of the European Conference on Information Systems. Naples; 2003. Positivist, single case study research in information systems: A critical analysis. [ Google Scholar ]

• On-schedule delivery
• Compliance with the provided brief
• Chat with your helper
• Ongoing 24/7 support
• Real-time alerts
• Free revisions
• Free quality check
• Free title page
• Free bibliography
• Any citation style

Finished Papers

Customer Reviews

Please fill the form correctly

Customer Reviews

If you can’t write your essay, then the best solution is to hire an essay helper. Since you need a 100% original paper to hand in without a hitch, then a copy-pasted stuff from the internet won’t cut it. To get a top score and avoid trouble, it’s necessary to submit a fully authentic essay. Can you do it on your own? No, I don’t have time and intention to write my essay now! In such a case, step on a straight road of becoming a customer of our academic helping platform where every student can count on efficient, timely, and cheap assistance with your research papers, namely the essays.

Finished Papers

Parents Are Welcome

No one cares about your academic progress more than your parents. That is exactly why thousands of them come to our essay writers service for an additional study aid for their children. By working with our essay writers, you can get a high-quality essay sample and use it as a template to help them succeed. Help your kids succeed and order a paper now!

• Our Listings
• Our Rentals
• Testimonials
• Tenant Portal

Please don't hesitate to contact us if you have any questions. Our support team will be more than willing to assist you.

Advocate Educational Integrity

Our service exists to help you grow as a student, and not to cheat your academic institution. We suggest you use our work as a study aid and not as finalized material. Order a personalized assignment to study from.

EssayService strives to deliver high-quality work that satisfies each and every customer, yet at times miscommunications happen and the work needs revisions. Therefore to assure full customer satisfaction we have a 30-day free revisions policy.

Our Service Is Kept Secret

We are here to help you with essays and not to expose your identity. Your anonymity is our priority as we know it is yours. No personal data is collected on our service and no third parties can snoop through your info. All our communication is encrypted and stays between you and your writer. You receive your work via email so no one will have access to it except you. We also use encrypted payment systems with secure gateways for extra security.

Finished Papers

Finished Papers

Testimonials

Customer Reviews

Finished Papers

offers a great selection of professional essay writing services. Take advantage of original, plagiarism-free essay writing. Also, separate editing and proofreading services are available, designed for those students who did an essay and seek professional help with polishing it to perfection. In addition, a number of additional essay writing services are available to boost your customer experience to the maximum!

Advanced writer

Add more quality to your essay or be able to obtain a new paper within a day by requesting a top or premium writer to work on your order. The option will increase the price of your order but the final result will be totally worth it.

Top order status

Every day, we receive dozens of orders. To process every order, we need time. If you’re in a great hurry or seek premium service, then choose this additional service. As a result, we’ll process your order and assign a great writer as soon as it’s placed. Maximize your time by giving your order a top status!

SMS updates

Have you already started to write my essay? When it will be finished? If you have occasional questions like that, then opt-in for SMS order status updates to be informed regarding every stage of the writing process. If you’re pressed for time, then we recommend adding this extra to your order.

Plagiarism report

Is my essay original? How do I know it’s Turnitin-ready? Very simple – order us to attach a detailed plagiarism report when work is done so you could rest assured the paper is authentic and can be uploaded to Turnitin without hesitating.

1-page summary

World’s peace isn’t riding on essay writing. If you don’t have any intent on reading the entire 2000-word essay that we did for you, add a 1-page summary to your order, which will be a short overview of your essay one paragraph long, just to be in the loop.

Finished Papers

Once your essay writing help request has reached our writers, they will place bids. To make the best choice for your particular task, analyze the reviews, bio, and order statistics of our writers. Once you select your writer, put the needed funds on your balance and we'll get started.

Final Paper

Essays service custom writing company - The key to success

Quality is the most important aspect in our work! 96% Return clients; 4,8 out of 5 average quality score; strong quality assurance - double order checking and plagiarism checking.

Customer Reviews

Charita Davis

Finished Papers

Jam Operasional (09.00-17.00)

+62 813-1717-0136 (Corporate)                                      +62 812-4458-4482 (Recruitment)

All our papers are written from scratch. To ensure high quality of writing, the pages number is limited for short deadlines. If you want to order more pages, please choose longer Deadline (Urgency).

Finished Papers

(415) 520-5258

If you can’t write your essay, then the best solution is to hire an essay helper. Since you need a 100% original paper to hand in without a hitch, then a copy-pasted stuff from the internet won’t cut it. To get a top score and avoid trouble, it’s necessary to submit a fully authentic essay. Can you do it on your own? No, I don’t have time and intention to write my essay now! In such a case, step on a straight road of becoming a customer of our academic helping platform where every student can count on efficient, timely, and cheap assistance with your research papers, namely the essays.

Customer Reviews

Megan Sharp

We do not tolerate any form of plagiarism and use modern software to detect any form of it