university essay font size

Essay writing: Formatting

• Introductions
• Conclusions
• Analysing questions
• Planning & drafting
• Revising & editing
• Proofreading
• Essay writing videos

Jump to content on this page:

Essays are formal documents and should look professional Advice from the Skills Team

Whilst there are no hard rules about how you format essays, there are some conventions and common practices that are best to follow. If you use the settings on this page, you will produce an acceptably formatted essay.

Document layout

Margins - between 2 cm and 2.54 cm (1 inch) all around.

Line spacing - either 1.5 or double-line spacing.

Paragraph spacing - either 1 clear line between or at least 8 pt space after each paragraph (more if double-line spaced)

Alignment - left aligned (fully justified with a straight right-edge is not recommended as this reduces readability and accessibility). Some longer essays may require subheadings which should also be left-aligned.

Indents - no indents on first lines of paragraphs are needed.

It is also good practice to put your student number and module number in the header of the document and a page number at the bottom of the page.

Text formatting

Font - the default font that comes with MS Word (currently Calibri) is fine for academic work. You may see persistent advice in handbooks that suggests you should use Times New Roman or Arial. If you prefer these, you can change it - but this is no longer a requirement.

Font size - fonts should be 11 or 12 point.

Font style - headings and subheadings, if they are required (most essays will not use them), are usually formatted in bold and should be at least 2 point sizes larger than the standard text. Underlining should be avoided as this is seen as rather dated. Some text can be formatted in italics - see our page  Italics, when to use them , for guidance.

Shorter quotations in the text do not need to be italicised and should have double-quotations marks "like this" to indicate they are direct quotations. Longer quotations (what counts as this differs depending on your referencing style) should be created in their own paragraph, single spaced and indented by 1cm from both left and right margins:

For example:

Graduate attributes for employability are described as:

a set of achievements – skills, understandings and personal attributes – that makes graduates more likely to gain employment and be successful in their chosen occupations, which benefits themselves, the workforce, the community and the economy. (Yorke, 2006)

The main change in this definition compared to the earlier definition of graduate attributes from Bowden (2000) is that that the attributes are no longer ...

UoH Harvard/APA

Your reference list should be in alphabetical order (by author surname) and single line spaced. There should be a clear line space (or at least 6 pt space) between each reference. All references should be left-aligned with no indentation. For information about how to format individual references, see the Harvard Hull Referencing Guide.

UoH Footnotes

Your reference list should be in alphabetical order (by first author surname) and single line spaced.  All references should be left-aligned and have a hanging indent (all but the first line are indented by approx. 1cm). For information about how to format individual references, see the  Footnotes Hull Referencing Guide.

Other referencing styles

Please see your individual departmental guidance.

We provide here a Microsoft Word template that can be used for your essays. It has the correct layout and formatting, including useful styles.

• Essay template

Download this template to somewhere you can access easily. When you click to open it, it will open a new document based on the template , leaving the original intact.

• << Previous: Conclusions
• Next: Analysing questions >>
• Last Updated: Jul 4, 2024 10:15 AM
• URL: https://libguides.hull.ac.uk/essays
• Login to LibApps
• Library websites Privacy Policy
• University of Hull privacy policy & cookies
• Website terms and conditions
• Accessibility
• Report a problem

• Peterborough

APA 7 Style: Formatting Guidelines

Common guidelines for apa-format papers.

APA 7 (2020) has introduced new guidelines for student papers that differ from the guidelines for professional papers being submitted for publication. Make sure to check with your professor or teaching assistant on whether they prefer that you use the student or professional format for your work.

Common Guidelines for All APA-Format Papers

Line Spacing

Paragraph alignment and indentation, page numbers.

• Figures and Tables

References Page

Guidelines Specific to Student Papers

Guidelines Specific to Professional Papers Being Submitted for Publication

• Headers with Running Head and Page Numbers

Guidelines for All APA-Format Papers

APA 7 (2020) accepts the use of a wider range of fonts than previous editions. Use a consistent font throughout the paper. While the size of the font in the text of the paper should confirm to one of the options below, figures may include a smaller or larger font size as needed.

Font options include:

• Times New Roman (12-point)
• Calibri (11-point)
• Arial (11-point)
• Lucinda (10-point)
• Sans Unicode (10-point)
• Georgia (11-point)
• Computer Modern (10-point)

The entire paper, including the title page, body of the paper, references and appendices, should be double-spaced. The bodies of figures and tables are excluded from this rule. Do not add extra line spaces between paragraphs or after a heading. 

Use 2.54 CM (1 inch) margins on all sides of the paper.

All paragraphs should be left-aligned (do not full-justify text). For each new paragraph indent five spaces or ½ inch.  Use the tab key to indent paragraphs.

All papers should have a page number in the top right corner of the header. Page numbers should be on every page of the paper, with the title page being page 1.

APA 7 (2020) recommends the use of headings in order to clarify the organization of papers. Note that a heading for the introduction is not needed or recommended. The number and level of headings required depend on the length and complexity of the paper.

• Level One headings are centred and bolded and use title case capitalization (all key words capitalized). The text of the paper begins on the next line as a new paragraph.
• Level 2 Headings are left-aligned and bolded and use title case capitalization (all key words capitalized). The text of the paper begins on the next line as a new paragraph.
• Level 3 Headings are left-aligned, bolded, and italicized . They use title case capitalization (all key words capitalized). The text of the paper begins on the next line as a new paragraph.
• Level 4 Headings are indented, bolded and use title case capitalization (all key words capitalized). There is a period at the end of a level 4 heading, and the text of the paragraph begins immediately after the period.
• Level 5 Headings are indented, bolded, and italicized . They use title case capitalization (all key words capitalized). There is a period at the end of a level 5 heading, and the text of the paragraph begins immediately after the period.

Sample Paper with Different Levels of Headers  

Tables and Figures

Label both tables and figures, numbering them consecutively in the order that they are discussed in the text. 

Tables include a numbered label, such as “Table 1”, and this bolded label is placed above the title. Below the label, insert a table title in italics; this title should briefly identify the data in the table that follows the label.

Figures can include maps, graphs, charts or other images. Place a label, such as "Figure 1", above the figure; this label is in bold. Below the label, insert a figure title using title case and italics. Below the image, place a caption to offer more detailed information on the figure.

Refer to all tables and figures in the text of your paper by their label: “In Table 1, it is clear that . . .” or “. . . area is separated into five geographically distinct sections (see Figure 2).

APA 7 (2020) offers two options for the placement of tables and figures. They can either be integrated into the text of the paper soon after it is first mentioned in the text. Or, tables and figures can be included after the references. If you choose to position tables and figures after the references page, each table should be positioned on a separate page followed by each figure positioned on a separate page.

More advice on figures and tables from the APA Style website

• APA (2020) recommends that you ask your professor or the editor to which you are submitting a manuscript for publication whether they have a preference as to whether figures and tables be integrated into the text or included on separate pages after the references.

All sources cited in the paper (except for personal communications) should be included in a references list. Begin the references page on a separate page, following the conclusion on the text of the paper. On the top line of the references page, the word References should be centred and bolded. The first reference begins on the next line of the reference page.

For further information on how to format the references page, see APA 7 Style: References . 

Sample References Page

Appendices 

An appendix includes relevant, supplementary information to the paper. Appendices should be placed after the references page and tables and figures (if relevant).

• Each appendix should begin on a separate page and should have a label and title.
• The appendix label and title should be centred and bolded. Write the label on one line and then the title on the next line.
• If you have only one appendix, label it Appendix.
• If you have more than one appendix, label them Appendix A, Appendix B, or Appendix C etc. in the order that it is discussed in the text of the paper.
• You must refer to all appendices in the text of your paper by their label (see Appendix) or (see Appendix A).

Sample Appendix 

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

What is the standard/recommended font to use in papers?

I looked around but did not find that anyone has asked this before, but what are the fonts that are standard/recommended while writing academic reports/papers?

• publications

• 19 No need to search for the perfect font. You just download the latex/word template that the journal / conference provides and you stick to it. –  Alexandros Commented Aug 7, 2014 at 10:12
• 3 In my case there isn't a template, that is the problem. –  Man Commented Aug 7, 2014 at 10:12
• 1 @O.R.Mapper yes very true, although I assume if the OP was looking for the standard font of every language in the world for academic publishing, we could close it as "too broad" –  user-2147482637 Commented Aug 7, 2014 at 15:35
• 10 People stick with the Computer Modern default in LaTeX so much that I once had someone tell me a paper where I intentionally chose a different serif font "looked unprofessional." –  Matt Reece Commented Aug 7, 2014 at 17:32
• 3 Please do not be "that person" who has the only paper in the journal or proceedings with a different font from the others. –  Max Commented Aug 8, 2014 at 8:42

4 Answers 4

If there's no template, then the choice is yours. However, you should make sure to pick a font that's easy to read. The usual standards in academia tend to be the Times, Helvetica/Arial, and Computer Modern families. This doesn't restrict you from using fonts like Book Antiqua, Myriad Pro, Goudy Old Style, or Garamond, but they're definitely not standard.

• 9 As to Helvetica/Arial: I think conventional wisdom is that serif fonts are preferred for large bodies of text, while sans serif should be reserved for short chunks like labels, headings, etc. I've certainly never seen a published paper set entirely in Helvetica. Then again, in my field everyone uses LaTeX, so unless you make a special effort, everything comes out in Computer Modern. –  Nate Eldredge Commented Aug 7, 2014 at 15:52
• @NateEldredge: You are correct that serif fonts are easier to handle in large doses, but Helvetica is the "default" font for most "official" documents and reports throughout most of Europe. And this extends to preprints when not done in LaTeX. –  aeismail Commented Aug 7, 2014 at 15:56
• 14 Eurghhhhhhhhhhh. –  Nate Eldredge Commented Aug 7, 2014 at 16:14
• @NateEldredge: This is not undisputed. @ aeismail: It’s rather Arial due that popular operating system (which does not make this any better; not because of serif vs. sans-serif, but because I do not want to see that font anymore to the extent that I tweaked my browser to auto-replace any resembling fonts). –  Wrzlprmft ♦ Commented Aug 8, 2014 at 8:35
• @Wrzlprmft: True, it is normally Arial that is specified; fortunately the differences are small enough that I use Helvetica and no one complains. (And actually I'm starting to see more references to Helvetica nowadays.) –  aeismail Commented Aug 8, 2014 at 12:00

For an academic paper each publisher journal have their standards. These do not affect or are affected by the manuscripts sent in to the journal. Some journals specify fonts, commonly standard Times Roman, for their manuscripts. If the journal specifies something, follow that specification. Otherwise use a font that is easy to read. There is no need to use anything but a standard font for whatever typesetting/word processor system.

There isn't any.

Focus on the content, write using your favorite writing software's default font, and let the journal's typesetting staff worry about the looks of the published version.

For the subset of journals that do not take care of typesetting, first make sure they are legitimate, then use the template they provide.

If no template is provided discuss with your supervisor and colleagues whether the journal is really worth your time, if it is then use your favorite software's default font.

As others have mentioned, the standard font varies, but is usually a serif font such as Times New Roman, although sans serif fonts such as Arial and Helvetica seem to be gaining traction as well. Their is major disagreement over which is easier to read--serif or sans serif fonts, with no clear consensus on the outcome. For example, see this paper .

Font size is typically twelve point. Follow the guidelines on this one, and make sure to keep your font consistent. Nothing is more likely to get you minus points than some obvious monkeying with the font size, whether to lengthen your manuscript (most commonly seen in undergrad papers) or to fit your text into the page limit (the rest of us!).

You must log in to answer this question.

Not the answer you're looking for browse other questions tagged publications writing formatting ..

• Featured on Meta
• Bringing clarity to status tag usage on meta sites
• We've made changes to our Terms of Service & Privacy Policy - July 2024
• Announcing a change to the data-dump process

Hot Network Questions

• LED as a power source
• DIN Rail Logic Gate
• Are there jurisdictions where an uninvolved party can appeal a court decision?
• Can't figure out this multi-wire branch circuit
• Conditional environment using package option
• Can a Statute of Limitations claim be rejected by the court?
• Short story about a committee planning to eliminate 1 in 10 people
• Would several years of appointment as a lecturer hurt you when you decide to go for a tenure-track position later on?
• Where is the 6D-QSAR software Quasar(X) available?
• A burning devil shape rises into the sky like a sun
• The minimal Anti-Sudoku
• How are USB-C cables so thin?
• AGPL/Commercial software
• Lookup value between two dates in excel
• Fisher claims Σ(x - λ)²/λ is chi-squared when x is Poisson – how is that?
• I submitted a paper and later realised one reference was missing, although I had written the authors in the body text. What could happen?
• If there is no free will, doesn't that provide a framework for an ethical model?
• Confused about topographic data in base map using QGIS
• How can I cross an overpass in "Street View" without being dropped to the roadway below?
• Making blackberry Jam with fully-ripe blackberries
• Connector's number of mating cycles
• Smallest natural number unrepresentable by fifty letters
• Word to classify what powers a god is associated with?
• Looking for a book from 25 ish years ago, Aliens mined Earth and made Humans their slaves, but a human bombs the alien homeworld,

A variety of fonts are permitted in APA Style papers. Font options include the following:

• sans serif fonts such as 11-point Calibri, 11-point Arial, or 10-point Lucida Sans Unicode
• serif fonts such as 12-point Times New Roman, 11-point Georgia, or normal (10-point) Computer Modern (the default font for LaTeX)

We recommend these fonts because they are legible and widely available and because they include special characters such as math symbols and Greek letters. Historically, sans serif fonts have been preferred for online works and serif fonts for print works; however, modern screen resolutions can typically accommodate either type of font, and people who use assistive technologies can adjust font settings to their preferences. For more on how font relates to accessibility, visit the page on the accessibility of APA Style .

Use the same font throughout your paper, with the following exceptions:

• figures: Within figure images, use a sans serif font with a type size between 8 and 14 points.
• computer code: To present computer code, use a monospace font such as 10-point Lucida Console or 10-point Courier New.
• footnotes: When inserting footnotes with the footnotes function of your word-processing program, use the default font settings. The footnote font might be smaller than the text font (and have different line spacing), and it is not necessary to change it.

Instructors and publishers vary in how they specify length requirements. Different fonts take up different amounts of space on the page; thus, we recommend using word count rather than page count to gauge paper length if possible.

Font is covered in the seventh edition APA Style manuals in the Publication Manual Section 2.19 and the Concise Guide Section 1.18

Related handout

• Student Paper Setup Guide (PDF, 3MB)

From the APA Style blog

APA Style student papers webinar

A new APA Style webinar, “A Step-by-Step Guide for APA Style Student Papers,” taking place on September 10, 2020, will provide detailed guidance on creating, formatting, and organizing APA Style student papers.

• Color Palettes
• Superhero Fonts
• Gaming Fonts
• Brand Fonts
• Fonts from Movies
• Similar Fonts
• What’s That Font
• Photoshop Resources
• Slide Templates
• Fast Food Logos
• Superhero logos
• Tech company logos
• Shoe Brand Logos
• Motorcycle Logos
• Grocery Store Logos
• Pharmaceutical Logos
• Graphic Design Basics
• Beer Brand Ads
• Car Brand Ads
• Fashion Brand Ads
• Fast Food Brand Ads
• Shoe Brand Ads
• Tech Company Ads
• Motion graphics
• Infographics
• Design Roles
• Tools and apps
• CSS & HTML
• Program interfaces
• Drawing tutorials

What is Emphasis in Graphic Design:

Seattle Mariners Colors – Hex, RGB,

The SV Darmstadt 98 Logo History,

What is Baseline in Graphic Design

Design Your Way is a brand owned by SBC Design Net SRL Str. Caminului 30, Bl D3, Sc A Bucharest, Romania Registration number RO32743054 But you’ll also find us on Blvd. Ion Mihalache 15-17 at Mindspace Victoriei

[email protected]

Academic Appeal: The 11 Best Fonts for Academic Papers

• BY Bogdan Sandu
• 26 February 2024

Imagine settling into the rhythm of crafting your academic magnum opus—the words flow, ideas chime, yet it all hinges on how your prose meets the reader’s eye. You’re well aware that  the best fonts for academic papers  don’t just whisper to the intellect; they shout to the discerning critic in each evaluator. Here unfolds a narrative, not merely of  typography  but your academic saga’s silent ambassador.

In forging this guide, I’ve honed focus on one pivotal, often underestimated player in the academic arena:  font selection .

Navigate through this roadmap and emerge with a treasure trove of  legible typefaces  and format tips that ensure your paper stands hallmark to clarity and professionalism.

Absorb insights—from the revered  Times New Roman  to the understated elegance of  Arial —paired with indispensable  formatting nuggets  that transcend mere compliance with  university guidelines .

Dive deep, and by article’s end, unlock a dossier of sage advice, setting your documents a class apart in the scrutinous world of academic scrutiny. Here’s to  typography  serving not just as a vessel but as your ally in the scholarly discourse.

The Best Fonts for Academic Papers

Traditional Choices and Their Limitations

Times new roman : ubiquity and readability vs. overuse.

Times New Roman’s historical significance and widespread use

And then there’s Times New Roman. The OG of academic fonts. It’s got history, it’s got style, and yes, it’s everywhere, but that’s because it works. It’s like the classic blue jeans of fonts – you just can’t go wrong with it.

FAQ On The Best Fonts For Academic Papers

What’s the best font for readability in academic papers.

Serif fonts  rule the academic roost for legibility.  Times New Roman  stands out; it’s visually comfortable for long reads—your thesis panel will thank you. Serifs guide the reader’s eye along lines of text, a scholarly norm.

Can I use sans-serif fonts for my dissertation?

Most committees nod approval at  sans-serif fonts  for figures and tables. Think  Arial  or  Calibri —crisp for data presentation. Main text? Stick to serifs. Sans-serifs are modern, sure, but tradition wins in dissertation style.

Is there an ideal font size for academic documents?

Size 12 strikes a balance—neither squint-inducing nor space-hogging. It’s the go-to for  MLA and APA guidelines . Exceptions exist; footnotes and figure text often shrink to  size 10  without side-eye from the scholarly crowd.

Does line spacing matter in academic papers?

Absolutely. Double-spacing is your friend here. It allows breathing room for annotations and comments—a courtesy to readers and graders. Plus,  formatting guidelines  generally mandate it for everything except block quotations, footnotes, and bibliographic entries.

Should I use different fonts for headings and subheadings?

Consistency  is key but differentiate hierarchically. Use  bold or italics  for distinction, maintaining the same font family. This unifies the document while subtly navigating readers through your paper’s structure.

What’s the most accepted font for academic journal submissions?

Journals often have  publisher requirements — Times New Roman, 12-point  font frequently tops the list. When in doubt, consult the submission guidelines to avoid the faux pas of using a non-standard font.

What are some lesser-known fonts suitable for academic writing?

Branch out with  Garamond —it’s elegant and legible.  Book Antiqua  also offers that classic vibe without being overused. Exploring beyond  Microsoft Word’s  default list can distinguish your work subtly yet effectively.

How crucial is font choice in peer-reviewed papers?

Font choice is your paper’s handshakes—first impressions matter.  Legible typefaces  support peer reviewers in engaging thoroughly with content. Underestimating font’s impact is akin to ignoring the dress code at a gala—noticeable and potentially distracting.

Do different academic fields prefer specific fonts?

Indeed, fields pivot on tradition. Humanities often herald  Times New Roman ; STEM fields lean into  Arial’s clean lines  for clarity in data-driven documents. Match your font to the field’s ethos.

Can I be creative with fonts in my academic paper?

Creativity in academics lives in content, less in formatting. Keep the font choice within the bounds of  readability  and  academic institution guidelines . Let your research shout, not your typeface. Originality lands in your discoveries, not font escapades.

Stepping back, eyeing the canvas of our discourse on  the best fonts for academic papers , it’s clear:  Typography  wields quiet power—shaping perception, ensuring clarity, the unsung hero in the story of academic success.  Serif fonts —with Times New Roman at the helm—have held the baton in traditional scholarly compositions, swaying with the rhythm of  legibility  and  convention .

Yet, amidst the staccato of intellectual exchange, the modern beats of  Arial  and  Calibri  press forth—bringing sleekness to tables and lucidity to data. Foreground this takeaway: your words, the intense research, the hypotheses—they’re the protagonists.  Fonts , however, set the stage, inviting eyes to linger longer, to comprehend without strain.

So, equip your arsenal with the  typographic titans  treasured in these halls of learning. Their silent echo underscores your voice, bearing it aloft through the critical gaze of peers and mentors. With this map in hand, chart a course through the vast sea of academia—poised to make your indelible mark.

If you liked this article about  the best fonts for academic papers , you should check out this article about  the best fonts for accessibility .

There are also similar articles discussing  the best fonts for children’s books ,  the best fonts for neon signs ,  the best fonts for vinyl lettering , and  the best fonts for invitations .

And let’s not forget about articles on  the best fonts for Google Slides ,  the best fonts for mobile apps ,  the best fonts for blogs , and  the best fonts for magazines .

Also, you can check here the version of this article about fonts for academic papers in German .

• Recent Posts

The Pittsburgh Penguins Logo History, Colors, Font, And Meaning

The dallas stars logo history, colors, font, and meaning.

You may also like

Ad Impact: The 19 Best Fonts for Advertising

• Bogdan Sandu
• 20 December 2023

T-Shirt Typography: 30 Best Fonts for T-Shirts

• 21 December 2023

• 301 Academic Skills Centre
• Study skills online

Formatting your assignments

Illustrated step-by-step guides to help you understand the formatting and presentation expectations of university assignments.

Introduction 

Although formatting your essay, report or dissertation can feel like a lesser priority than the process of research and writing itself, it is an important way to ensure your ideas are given the spotlight through visually accessible, professional presentation. Formatting can be a minefield, especially when you’re formatting at the last minute; it’s important to leave a few days at the end of your essay writing process for working on your formatting, and to spend some time familiarising yourself with the different aspects of formatting.

301 Recommends:

Our Essay Structure and Planning workshop will outline how to analyse your essay question, discuss approaches logically structure all your ideas, help you make your introductions and conclusions more effective, and teach how to link your ideas and ensure all essay content flows logically from the introduction.

Below, you will find some general introductions to the key areas. 

Action: know the rules 

Because formatting rules can vary greatly depending on your department or assignment, it’s crucial to check the formatting specifications in your assignment description/rubric, and any general departmental presentation standards, as a first port of call. Many referencing systems also have specific rules about how to format your work, so make sure to familiarise yourself with the university library’s referencing guides . Many referencing systems also have more detailed style guides available via their websites.

Formatting key information  

Assignment cover sheets .

In some departments, you may be expected to include a cover sheet on the front page of your assignment. This is a page including key information about your assignment, such as your module number, student registration number, essay title, and submission date.

You may be asked to submit a plagiarism declaration and to make your markers aware of any disabilities through the yellow sticker system . If you are asked to include a cover sheet in your assignment, your department should make you aware of where you can access this.

Assignment titles

Place your assignment title at the top of your first page, either centre or left aligned, in bold font. At university, you may be assigned a pre-designed essay title/question, or asked to select from several possible titles. You may also be asked to design your own essay title. Here are some top tips on designing your own title:

• To bring focus to your essay, draft a working title at the essay planning stage. You can come back and review this title in light of your finished essay draft.
• Make sure to use action words in your essay title that reflect the skills your assessors are looking for, both in the assignment description and the marking criteria you have been given. For example, if heavy emphasis is placed on critical analysis, you could use a title like ‘Analyse the effect of…’ See this glossary of essay terms , containing examples that you can use in your own titles. 
• The action words you choose can also help you to reflect the structure of the essay in your question. For example, an essay using the action word ‘Discuss’ might use a for/against/conclusion or advantages/disadvantages/conclusion structure, or an essay using the term ‘Analyse’ might break an issue down into parts, e.g. into key themes, to understand its meaning as a whole. Think about the type of essay you want to write: do you want it to be comparative, look at several topics equally, or do you have a clear argument that you want to put forward? You can then create a question that gives you the opportunity to approach the topic from your own perspective.
• Make sure to include the main terminology you are working with in your assignment title.
• Make sure your question has a realistic scope, without being so broad that you cannot answer it within the limitations of your essay. To limit your question, you could include any limiting factors you are working with, such as specific time periods, geographical regions or sub-themes within the overall topic area. For example, in the title ‘Evaluate the proposition that a global monoculture will destroy diversity and difference’, the broad topic of global monoculture is limited down through a specific sub-focus on diversity and difference.

Stating word counts 

Depending on the instructions you have been given, you may be asked to state your word count, either on your cover sheet or at the beginning of your essay. If you are asked to include this information, make sure your word count accurately reflects the assessment guidance: for example, are references included in your word count?

Visual clarity  

Line spacing .

Most assignment descriptions specify that you should increase the space between each line on the page, from the standard 1.0 spacing to either 1.5 or 2.0 spacing. You are asked to do this to make the essay more visually accessible and easier to read, by breaking up the number of lines on each page. 

Download this step-by-step illustrated guide to line spacing in Microsoft Word and Google Docs.

Fonts 

All non-examination based assignments should be word processed rather than handwritten. Most assignment descriptions will specify that for visual clarity, and to ensure a professional appearance, you should use a plain, sans-serif font such as Arial. For readability, this should be in 11 or 12 point size. Check your departmental or assignment guidance for any specific rules about font choices. 

Page numbering, headers and footers  

Including page numbers in your assignments makes them more accessible. Depending on the departmental guidance you have been given, you may be asked to include these in either the header or the footer of your essay (the blank space above and below where the text would go on a normal page in a word processor). It may also be helpful to include your registration number and the module code of the essay in the same header or footers that specify the page number. 

Download this step-by-step illustrated guide to adding page numbers and using headers and footers in Microsoft Word and Google Docs. 

Page layout   

Margins .

A margin is the amount of blank space on either side of a paragraph in a normal word processor. Traditionally, assignment descriptions specified that the margins should be made wider at the binding edge (the left hand side) of the page, to allow for easier reading of printed essays. However, with the shift to online essays, you might not be asked to do this any more and the default settings on your word processor are likely to be sufficiently wide.

For printed dissertations and theses, you may receive specific guidance about the suitable layout of margins, as these are more likely to be printed: see this university guide on formatting PhD theses . 

Download this step-by-step illustrated guide to adjusting margins in Microsoft Word and Google Docs.

Paragraph alignment 

Most formatting instructions specify that paragraphs should be lined up in a straight line (aligned) on the left hand edge, but left jagged on the right hand edge (like this page). This is called left alignment, or flush-left style, and should be the default alignment setting for your word processor. This style can be helpful for visual accessibility, but check any specific instructions you have been given by your department to see which style of alignment you have been asked to use. 

Download this step-by-step illustrated guide to adjusting paragraph alignment in Microsoft Word and Google Docs.  

Paragraph indentation

You may be asked to add indents to your paragraphs: an indent is an additional small gap between the margin and the beginning of a paragraph (it makes a ‘dent’ in the first line of your paragraph). Indents are used to provide extra clarification that the reader is starting a new paragraph after finishing the last one: therefore, they should not be used in the first paragraph of your essay. Indents are not always required, and whether you are expected to use them may depend on your referencing style , and any formatting instructions you have been given by your department.

Download this step-by-step illustrated guide to indenting paragraphs in Microsoft Word and Google Docs.

Formatting referenced material 

Footnotes and endnotes .

Some referencing systems require you to use footnotes or endnotes to format your references (make sure to check the library’s referencing guide to familiarise yourself with the expected format of your referencing style). Inserting a footnote into your word document when you have cited from a source adds a superscript number (a number formatted in a smaller font) to the sentence. It creates a note with a matching number at the bottom of the page you are working on (in the footer), which you can add the reference information to.

Endnotes work in the same way, but instead of appearing at the bottom of the page, the reference list appears at the end of the document.

Download this step-by-step illustrated guide to manually inserting footnotes and endnotes in Microsoft Word and Google Docs.  

References and bibliographies  

Instead of, or alongside footnotes/endnotes, some referencing systems ask you to include a bibliography and/or a reference list at the end of the essay (make sure to check the library’s referencing guide to familiarise yourself with the expected format of your referencing style). A reference list is a list of all the sources you have directly referred to in the essay, which could be ordered numerically or alphabetically, depending on your referencing style.

A bibliography could be used alongside, or instead of, a reference list, depending on your referencing style; here, you list all the sources you have consulted that have influenced your ideas, whether they are included in the essay or not. The way this is ordered also depends on your referencing style. 

If you auto-generate your citations in Microsoft Word or Google Docs, you can auto-generate your bibliography instead of creating it manually: instructions for doing so are in the resource below. If you use a different reference manager, such as Mendeley, Zotero, or Endnote, these have their own specific instructions for auto-generating bibliographies. See the reference management resources offered by the university. 

Download this step-by-step illustrated guide to manually or automatically formatting a bibliography or reference list in Microsoft Word and Google Docs.

Block quotations  

When you need to include a quotation in your essay that is three or more lines long, you can add this as a block quotation. A block quotation appears on a separate line to the other parts of the paragraph, and is indented (i.e. there is a wider gap between a block quotation and the left-hand margin than there is between the rest of the paragraph and the left-hand margin). Block quotations aren’t placed in quotation marks, so the indentation is used to indicate that you are using a quotation.

Check your referencing guide and any departmental guidance to learn more about the specific rules on formatting block quotations in your department. Because they take up large chunks of your word count, and break up the flow of your texts, make sure to use block quotations sparingly: they are especially helpful when you are going to perform close analysis of a large section of text. For more information on different types of quotation and how to use them, see our workshop on paraphrasing and using academic sources.

Download this step-by-step illustrated guide to formatting block quotations in Microsoft Word and Google Docs.

Advanced formatting 

Headings and contents tables .

Most standard short essays do not include headings, other than the essay title and reference list and/or bibliography. Section headings may be required for some longer or more structured types of academic writing, such as reports; reports often follow a very closely prescribed structure, so it is essential to pay very careful attention to the specific guidelines issued with your brief. Make sure that any system you use for numbering your headings and subheadings is consistently applied throughout the document.

Depending on the advice you have been given, and the length and complexity of a lab report, you may also be required to include a table of contents to help the reader navigate between headings. Contents tables are generally standard practice in longer assignments such as dissertations and theses. Make sure to check any departmental guidance you have been given about formatting reports.

Download this step-by-step illustrated guide to formatting headings and contents tables in Microsoft Word and Google Docs.

301 Recommends: Scientific Writing and Lab Reports Workshop

This workshop  will help you to familiarise yourself with some of the specific expectations associated with this assignment format.

Figures and tables 

Some kinds of essays, dissertations and reports will require you to make use of figures (pictures, diagrams, and graphs) and tables (any data in a table format). Figures and tables are normally numbered in sequence, e.g. ‘Table 1’, ‘Figure 4’, and are directly referred to in the text according to their number, rather than according to their location on the page (e.g. ‘as shown in Table 2’ rather than ‘as shown below’). 

If your text is of dissertation or thesis length, or if your text has several figures, it may also be helpful to include a list of figures immediately after the table of contents. Some referencing guides have specific rules about presenting and referencing tables and figures, so make sure to familiarise yourself with these and carefully read any specific instructions about figures and tables in your assignment brief. 

Download this step-by-step illustrated guide to inserting figures and tables and creating lists of figures/tables in Microsoft Word and Google Docs.

Top tips for formatting tables and figures:

• Make sure that any tables or figures you use are placed below the paragraph where you refer to them, and that you have directly referred to all figures and tables in the text of the essay.
• The caption for a table usually acts as its title, so this is placed above the table in the document. The caption for a figure is usually placed underneath the figure. Do not include unnecessary additional titles in the graph image itself, if the title is already included in your image caption. 
• Make sure to label your captions consistently, choosing between ‘Fig.’ or ‘Figure’ and consistently using either a full stop or a colon after the label (i.e. ‘Figure 1:’ or ‘Fig. 1.’) 
• Your caption should clearly and succinctly explain what the figure or table is. If the figure is taken from an external source, you must provide a reference that accurately reflects its copyright status (see these university library guides to inserting and attributing images and figures in university work). 
• Make sure to include legends in any charts you use (a key that helps to explain the data in the chart). Any data series you use should be clearly distinguishable from each other (e.g. avoid printing a report with coloured graphs in black and white!) If you are only using one series of data, a legend is not always necessary. 
• Make sure tables are clear and easy to read, using sans serif fonts, a readable font size, and avoiding unnecessary use of colour. 
• Make sure graphs are clear and easy to read, with clearly and appropriately labelled axes. Be wary of 3D effects that may obscure the clarity of a graph.
• Make sure to avoid presenting the same information in a graph and a table.
• Images and figures in printed essays, such as dissertations and theses, should be large enough for the text and numbers to be legible on the printed copy. Make sure they do not extend beyond the print margins of the document. 

301 Recommends: Displaying Data in Graphs and Tables Workshop

This workshop will provide more technical advice on using graphs and tables in your work. See also this Engineering department guidance on formatting graphs and tables in Engineering lab reports.

Appendices 

Appendices commonly appear in dissertations, theses, and lab reports. An appendix provides supporting information that gives the reader a better understanding of the essay, but that might be too long, detailed or awkward to insert into the main body of the essay without breaking up its flow. Interview questions or transcripts, sample questionnaires, raw data, figures, photographs, large/complex datasets, and diagrams are all examples of information that could be included in an appendix, if it is relevant to do so.

The reader should be able to understand the essay without reference to this supporting information, as all the most important and relevant information needed to answer the question should be included in the body (i.e., the appendix should not be used to make room for content that doesn’t fit within your word count). Your appendices must be clearly signposted and explained in the body of your report, highlighting any information that is essential for your reader to understand. Do not include any appendices that are not referenced in the text itself.

The appendices should be placed in numerical or alphabetical order, and signposted according to this specific system (e.g. ‘Appendix B indicates that…’) They should be clearly labelled, using headings that match up to the in-text reference. Appendices usually appear at the very end of the assignment, after your references/bibliography. Make sure to list any appendices used in your table of contents; if you have been instructed to do so by your department or within your referencing system, you could include a list of appendices separate to your contents list. 

The specific format of the appendix heading, and the reference made to the appendix in the text, depends on your referencing style , so make sure to carefully review this information before you design your appendices.

Download this step-by-step illustrated guide to inserting appendices and creating lists of appendices in Microsoft Word and Google Docs.

Tips and resources

• Use this 301 proofreading checklist to check over your work when you are finished.
• Use the University Library referencing guide for advice about referencing and formatting that is specific to your referencing style. If you need extra clarification about formatting rules, it is often possible to download an extended style guide from the official website for a specific referencing system. 
• For further training on referencing, using reference generators, and using images in your work, see the University Library workshop programme .

Related information

Academic Writing

Proofreading

Essay structure and planning

Scientific writing and lab reports

Creating accessible Word documents

Summer support

Are you getting ready to start a new academic year? Or preparing for summer resits?

We have a whole host of support ready for you to access whenever you need it. Our online resources allow you to develop your academic skills at your own pace, building on your existing skills ready for whatever you are facing next.

Take advantage of our curated Level Up Your Skills packages and start working through resources for your upcoming level of study, or use study skills online to find specific topics you want to work on.

Dr. Mark Womack

What Font Should I Use?

The Modern Language Association (MLA) provides explicit, specific recommendations for the margins and spacing of academic papers. (See: Document Format .) But their advice on font selection is less precise: “Always choose an easily readable typeface (e.g. Times New Roman) in which the regular style contrasts clearly with the italic, and set it to a standard size (e.g. 12 point)” ( MLA Handbook , 7th ed., §4.2).

So which fonts are “easily readable” and have “clearly” contrasting italics? And what exactly is a “standard” size?

For academic papers, an “easily readable typeface” means a serif font, and a “standard” type size is between 10 and 12 point.

Use A Serif Font

Serifs are the tiny strokes at the end of a letter’s main strokes. Serif fonts have these extra strokes; sans serif fonts do not. ( Sans is French for “without.”) Serif fonts also vary the thickness of the letter strokes more than sans serifs, which have more uniform lines.

Books, newspapers, and magazines typically set their main text in a serif font because they make paragraphs and long stretches of text easier to read. Sans serifs (Arial, Calibri, Helvetica, Gill Sans, Verdana, and so on) work well for single lines of text, like headings or titles, but they rarely make a good choice for body text.

Moreover, most sans serifs don’t have a true italic style. Their “italics” are really just “obliques,” where the letters slant slightly to the right but keep the same shape and spacing. Most serifs, on the other hand, do have a true italic style, with distinctive letter forms and more compact spacing.

Since they’re more readable for long passages and have sharper contrast in their italics, you should always use a serif font for the text of an academic paper.

Use A Readable Type Size

The standard unit for measuring type size is the point . A point is 1 / 72 of an inch, roughly one pixel on a computer screen. The point size of a font tells you the size of the “em square” in which your computer displays each letter of the typeface. How tall or wide any given letter is depends on how the type designer drew it within the em square, thus a font’s height and width can vary greatly depending on the design of the typeface. That’s why if you set two fonts at the same point size, one usually looks bigger than the other.

Compare the following paragraphs, both set at 12 point but in different fonts:

For body text in academic papers, type sizes below 10 point are usually too small to read easily, while type sizes above 12 point tend to look oversized and bulky. So keep the text of your paper between 10 and 12 point .

Some teachers may require you to set your whole text at 12 point. Yet virtually every book, magazine, or newspaper ever printed for visually unimpaired grown-ups sets its body type smaller than 12 point. Newspapers use even smaller type sizes. The New York Times , for example, sets its body text in a perfectly legible 8.7 point font. So with proper spacing and margins, type sizes of 11 or 10 point can be quite comfortable to read.

Font Recommendations

I usually ask my students to use Century Schoolbook or Palatino for their papers. If your teacher requires you to submit your papers in a particular font, do so. (Unless they require you to use Arial , in which case drop the class.)

One thing to consider when choosing a font is how you submit your essay. When you submit a hard copy or a PDF, your reader will see the text in whatever typeface you use. Most electronic submission formats, on the other hand, can only use the fonts available on the reader’s computer. So if you submit the paper electronically, be sure to use a font your instructor has.

What follows is a list of some widely available, highly legible serif fonts well-suited for academic papers. I’ve divided them into four categories: Microsoft Word Fonts, Mac OS Fonts, Google Fonts, and Universal Fonts.

Microsoft Word Fonts

Microsoft Word comes with lots of fonts of varying quality. If your teacher asks you to submit your paper in Word format, you can safely assume they have Word and all the fonts that go with it.

Morris Fuller Benton designed Century Schoolbook in 1923 for elementary-school textbooks, so it’s a highly readable font. It’s one of the best fonts available with Microsoft Word. Because it’s so legible, U. S. Supreme Court Rule 33.1.b madates that all legal documents submitted to the Court be set in Century Schoolbook or a similar Century-style font.

Hermann Zapf designed Palatino in 1948 for titles and headings, but its elegant proportions make it a good font for body text. Named for Renaissance calligrapher Giambattista Palatino, this font has the beauty, harmony, and grace of fine handwriting. Palatino Linotype is the name of the font included with Microsoft Word; Mac OS includes a version of the same typeface called simply Palatino.

Microsoft Word includes several other fonts that can work well for academic essays: Bell MT , Californian FB , Calisto MT , Cambria , Garamond , and Goudy Old Style .

Mac OS Fonts

Apple has a well-deserved reputation for design excellence which extends to its font library. But you can’t count on any of these Mac OS fonts being on a computer that runs Windows.

Finding his inspiration in the typography of Pierre Simon Fournier, Matthew Carter designed Charter in 1987 to look good even on crappy mid-80s fax machines and printers. Its ability to hold up even in low resolution makes Charter work superbly well on screen. Bitstream released Charter under an open license, so you can add it to your font arsenal for free. You can download Charter here .

In 1991 Apple commissioned Jonathan Hoefler to design a font that could show off the Mac’s ability to handle complex typography. The result was Hoefler Text , included with every Mac since then. The bold weight of Hoefler Text on the Mac is excessively heavy, but otherwise it’s a remarkable font: compact without being cramped, formal without being stuffy, and distinctive without being obtrusive. If you have a Mac, start using it.

Other Mac OS fonts you might consider are Baskerville and Palatino .

Google Fonts

When you submit a paper using Google Docs, you can access Google’s vast library of free fonts knowing that anyone who opens it in Google Docs will have those same fonts. Unfortunately, most of those free fonts are worth exactly what you paid for them, so choose wisely.

IBM Plex is a super-family of typefaces designed by Mike Abbink and the Bold Monday type foundry for — you guessed it — IBM. Plex serif is a solid, legible font that borrows features from Janson and Bodoni in its design. Plex is, not surprisingly, a thoroughly corporate font that aims for and achieves a bland neutrality suitable for most research papers.

John Baskerville originally designed this typeface in the 1850s, employing new techniques to make sharper contrasts between thin and thick strokes in the letter forms. The crisp, elegant design has inspired dozens of subsequent versions. Libre Baskerville is based on the American Type Founder’s 1941 version, modified to make it better for on-screen reading.

Unfortunately. Google Fonts has few really good serif fonts. Some others you might consider are Crimson Pro and Spectral .

Universal Fonts

Anyone you send your document to will have these fonts because they’re built in to both Windows and Mac OS.

Matthew Carter designed Georgia in 1993 for maximum legibility on computer screens. Georgia looks very nice on web sites, but in print it can look a bit clunky, especially when set at 12 point. Like Times New Roman, it’s on every computer and is quite easy to read. The name “Georgia” comes from a tabloid headline: “Alien Heads Found in Georgia.”

Times New Roman is, for better or worse, the standard font for academic manuscripts. Many teachers require it because it’s a solid, legible, and universally available font. Stanley Morison designed it in 1931 for The Times newspaper of London, so it’s a very efficient font and legible even at very small sizes. Times New Roman is always a safe choice. But unless your instructor requires it, you should probably use something a bit less overworked.

How Should I Format My University Essay ?

Share this article

How should i format my university essay.

Students are often unsure of exactly how they should format their essays, assignments and reports for university if they haven’t been given specific or precise guidelines by their lecturers or tutors.

Luckily, there is a standard way to format essays for university that is generally accepted across Australian and New Zealand universities. This article will explain what you need to do to follow those most commonly accepted guidelines.

Your font should be Times New Roman or Arial. Don’t use anything fancy, and avoid Calibri and Cambria. Even though Word has set these as the default fonts, they are generally not the preferred font to use at university.

Your essay should be at least 1.5 line spaced, and often double spacing is preferred. This is to give your grader enough room to make corrections or write comments for you in the spaces in between, if they are grading on hard copy. If they are grading electronically, that spacing just makes the document easier to read on screen.

For an essay or assignment, in which you might only have one to three levels of headings, you might follow these guidelines:

Heading 1 (Centred, bold, size 14)

Heading 2 (left aligned, bold, size 12)

Heading 3 (left aligned, bold and italics, size 12)

Paragraphing

You can either use a first-line indent of 1.27 cm at the start of each paragraph or you can use a line space between each paragraph, but don’t use both.

Page Margins

Keep your margins set as the default used by Word, or at a minimum 2.54 cm all around. If your tutor or lecturer is grading on paper, they might appreciate a 4 cm left-hand margin so they have more room to write comments for you in the margins.

If you need any further assistance with essay editing, you can read more about our professional editing service . Capstone Editing is always here to help.

Capstone Editing

Recent articles.

• New ways to pick our expert brains
• 2023 Winner of the Capstone Editing Laptop Grant for Postgrad Coursework Students
• Winner of the 2023 Early Career Academic Research Grant for Women
• How to Use Conditional Sentences Correctly

Subscribe to our Blog

To receive informative articles and tailored advice for academics and students, as well as updates about our exciting grant and scholarship opportunities, please subscribe to our blog.