javascript assignment operators return

Home » JavaScript Tutorial » JavaScript Assignment Operators

JavaScript Assignment Operators

Summary : in this tutorial, you will learn how to use JavaScript assignment operators to assign a value to a variable.

Introduction to JavaScript assignment operators

An assignment operator ( = ) assigns a value to a variable. The syntax of the assignment operator is as follows:

In this syntax, JavaScript evaluates the expression b first and assigns the result to the variable a .

The following example declares the counter variable and initializes its value to zero:

The following example increases the counter variable by one and assigns the result to the counter variable:

When evaluating the second statement, JavaScript evaluates the expression on the right-hand first ( counter + 1 ) and assigns the result to the counter variable. After the second assignment, the counter variable is 1 .

To make the code more concise, you can use the += operator like this:

In this syntax, you don’t have to repeat the counter variable twice in the assignment.

The following table illustrates assignment operators that are shorthand for another operator and the assignment:

Chaining JavaScript assignment operators

If you want to assign a single value to multiple variables, you can chain the assignment operators. For example:

In this example, JavaScript evaluates from right to left. Therefore, it does the following:

• Use the assignment operator ( = ) to assign a value to a variable.
• Chain the assignment operators if you want to assign a single value to multiple variables.

JS Tutorial

Js versions, js functions, js html dom, js browser bom, js web apis, js vs jquery, js graphics, js examples, js references, javascript assignment, javascript assignment operators.

Assignment operators assign values to JavaScript variables.

Shift Assignment Operators

Bitwise assignment operators, logical assignment operators, the = operator.

The Simple Assignment Operator assigns a value to a variable.

Simple Assignment Examples

The += operator.

The Addition Assignment Operator adds a value to a variable.

Addition Assignment Examples

The -= operator.

The Subtraction Assignment Operator subtracts a value from a variable.

Subtraction Assignment Example

The *= operator.

The Multiplication Assignment Operator multiplies a variable.

Multiplication Assignment Example

The **= operator.

The Exponentiation Assignment Operator raises a variable to the power of the operand.

Exponentiation Assignment Example

The /= operator.

The Division Assignment Operator divides a variable.

Division Assignment Example

The %= operator.

The Remainder Assignment Operator assigns a remainder to a variable.

Remainder Assignment Example

Advertisement

The <<= Operator

The Left Shift Assignment Operator left shifts a variable.

Left Shift Assignment Example

The >>= operator.

The Right Shift Assignment Operator right shifts a variable (signed).

Right Shift Assignment Example

The >>>= operator.

The Unsigned Right Shift Assignment Operator right shifts a variable (unsigned).

Unsigned Right Shift Assignment Example

The &= operator.

The Bitwise AND Assignment Operator does a bitwise AND operation on two operands and assigns the result to the the variable.

Bitwise AND Assignment Example

The |= operator.

The Bitwise OR Assignment Operator does a bitwise OR operation on two operands and assigns the result to the variable.

Bitwise OR Assignment Example

The ^= operator.

The Bitwise XOR Assignment Operator does a bitwise XOR operation on two operands and assigns the result to the variable.

Bitwise XOR Assignment Example

The &&= operator.

The Logical AND assignment operator is used between two values.

If the first value is true, the second value is assigned.

Logical AND Assignment Example

The &&= operator is an ES2020 feature .

The ||= Operator

The Logical OR assignment operator is used between two values.

If the first value is false, the second value is assigned.

Logical OR Assignment Example

The ||= operator is an ES2020 feature .

The ??= Operator

The Nullish coalescing assignment operator is used between two values.

If the first value is undefined or null, the second value is assigned.

Nullish Coalescing Assignment Example

The ??= operator is an ES2020 feature .

Test Yourself With Exercises

Use the correct assignment operator that will result in x being 15 (same as x = x + y ).

Start the Exercise

COLOR PICKER

Contact Sales

If you want to use W3Schools services as an educational institution, team or enterprise, send us an e-mail: [email protected]

Report Error

If you want to report an error, or if you want to make a suggestion, send us an e-mail: [email protected]

Top Tutorials

Top references, top examples, get certified.

JAVASCRIPT ASSIGNMENT OPERATORS

In this tutorial, you will learn about all the different assignment operators in javascript and how to use them in javascript.

Assignment Operators

In javascript, there are 16 different assignment operators that are used to assign value to the variable. It is shorthand of other operators which is recommended to use.

The assignment operators are used to assign value based on the right operand to its left operand.

The left operand must be a variable while the right operand may be a variable, number, boolean, string, expression, object, or combination of any other.

One of the most basic assignment operators is equal = , which is used to directly assign a value.

Assignment Operators List

Here is the list of all assignment operators in JavaScript:

In the following table if variable a is not defined then assume it to be 10.

Assignment operator

The assignment operator = is the simplest value assigning operator which assigns a given value to a variable.

The assignment operators support chaining, which means you can assign a single value in multiple variables in a single line.

Addition assignment operator

The addition assignment operator += is used to add the value of the right operand to the value of the left operand and assigns the result to the left operand.

On the basis of the data type of variable, the addition assignment operator may add or concatenate the variables.

Subtraction assignment operator

The subtraction assignment operator -= subtracts the value of the right operand from the value of the left operand and assigns the result to the left operand.

If the value can not be subtracted then it results in a NaN .

Multiplication assignment operator

The multiplication assignment operator *= assigns the result to the left operand after multiplying values of the left and right operand.

Division assignment operator

The division assignment operator /= divides the value of the left operand by the value of the right operand and assigns the result to the left operand.

Remainder assignment operator

The remainder assignment operator %= assigns the remainder to the left operand after dividing the value of the left operand by the value of the right operand.

Exponentiation assignment operator

The exponential assignment operator **= assigns the result of exponentiation to the left operand after exponentiating the value of the left operand by the value of the right operand.

Left shift assignment

The left shift assignment operator <<= assigns the result of the left shift to the left operand after shifting the value of the left operand by the value of the right operand.

Right shift assignment

The right shift assignment operator >>= assigns the result of the right shift to the left operand after shifting the value of the left operand by the value of the right operand.

Unsigned right shift assignment

The unsigned right shift assignment operator >>>= assigns the result of the unsigned right shift to the left operand after shifting the value of the left operand by the value of the right operand.

Bitwise AND assignment

The bitwise AND assignment operator &= assigns the result of bitwise AND to the left operand after ANDing the value of the left operand by the value of the right operand.

Bitwise OR assignment

The bitwise OR assignment operator |= assigns the result of bitwise OR to the left operand after ORing the value of left operand by the value of the right operand.

Bitwise XOR assignment

The bitwise XOR assignment operator ^= assigns the result of bitwise XOR to the left operand after XORing the value of the left operand by the value of the right operand.

Logical AND assignment

The logical AND assignment operator &&= assigns value to left operand only when it is truthy .

Note : A truthy value is a value that is considered true when encountered in a boolean context.

Logical OR assignment

The logical OR assignment operator ||= assigns value to left operand only when it is falsy .

Note : A falsy value is a value that is considered false when encountered in a boolean context.

Specifications

Browser compatibility.

An assignment operator assigns a value to its left operand based on the value of its right operand.

The source for this interactive example is stored in a GitHub repository. If you'd like to contribute to the interactive examples project, please clone https://github.com/mdn/interactive-examples and send us a pull request.

The basic assignment operator is equal ( = ), which assigns the value of its right operand to its left operand. That is, x = y assigns the value of y to x . The other assignment operators are usually shorthand for standard operations, as shown in the following definitions and examples.

Simple assignment operator is used to assign a value to a variable. The assignment operation evaluates to the assigned value. Chaining the assignment operator is possible in order to assign a single value to multiple variables. See the example.

Addition assignment

The addition assignment operator adds the value of the right operand to a variable and assigns the result to the variable. The types of the two operands determine the behavior of the addition assignment operator. Addition or concatenation is possible. See the addition operator for more details.

Subtraction assignment

The subtraction assignment operator subtracts the value of the right operand from a variable and assigns the result to the variable. See the subtraction operator for more details.

Multiplication assignment

The multiplication assignment operator multiplies a variable by the value of the right operand and assigns the result to the variable. See the multiplication operator for more details.

Division assignment

The division assignment operator divides a variable by the value of the right operand and assigns the result to the variable. See the division operator for more details.

Remainder assignment

The remainder assignment operator divides a variable by the value of the right operand and assigns the remainder to the variable. See the remainder operator for more details.

Exponentiation assignment

The exponentiation assignment operator evaluates to the result of raising first operand to the power second operand. See the exponentiation operator for more details.

Left shift assignment

The left shift assignment operator moves the specified amount of bits to the left and assigns the result to the variable. See the left shift operator for more details.

Right shift assignment

The right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the right shift operator for more details.

Unsigned right shift assignment

The unsigned right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the unsigned right shift operator for more details.

Bitwise AND assignment

The bitwise AND assignment operator uses the binary representation of both operands, does a bitwise AND operation on them and assigns the result to the variable. See the bitwise AND operator for more details.

Bitwise XOR assignment

The bitwise XOR assignment operator uses the binary representation of both operands, does a bitwise XOR operation on them and assigns the result to the variable. See the bitwise XOR operator for more details.

Bitwise OR assignment

The bitwise OR assignment operator uses the binary representation of both operands, does a bitwise OR operation on them and assigns the result to the variable. See the bitwise OR operator for more details.

Left operand with another assignment operator

In unusual situations, the assignment operator (e.g. x += y ) is not identical to the meaning expression (here x = x + y ). When the left operand of an assignment operator itself contains an assignment operator, the left operand is evaluated only once. For example:

• Arithmetic operators

Document Tags and Contributors

• JavaScript basics
• JavaScript first steps
• JavaScript building blocks
• Introducing JavaScript objects
• Introduction
• Grammar and types
• Control flow and error handling
• Loops and iteration
• Expressions and operators
• Numbers and dates
• Text formatting
• Regular expressions
• Indexed collections
• Keyed collections
• Working with objects
• Details of the object model
• Using promises
• Iterators and generators
• Meta programming
• JavaScript modules
• Client-side web APIs
• A re-introduction to JavaScript
• JavaScript data structures
• Equality comparisons and sameness
• Inheritance and the prototype chain
• Strict mode
• JavaScript typed arrays
• Memory Management
• Concurrency model and Event Loop
• References:
• ArrayBuffer
• AsyncFunction
• Float32Array
• Float64Array
• GeneratorFunction
• InternalError
• Intl.Collator
• Intl.DateTimeFormat
• Intl.ListFormat
• Intl.Locale
• Intl.NumberFormat
• Intl.PluralRules
• Intl.RelativeTimeFormat
• ReferenceError
• SharedArrayBuffer
• SyntaxError
• Uint16Array
• Uint32Array
• Uint8ClampedArray
• WebAssembly
• decodeURI()
• decodeURIComponent()
• encodeURI()
• encodeURIComponent()
• parseFloat()
• Array comprehensions
• Bitwise operators
• Comma operator
• Comparison operators
• Conditional (ternary) operator
• Destructuring assignment
• Expression closures
• Generator comprehensions
• Grouping operator
• Legacy generator function expression
• Logical operators
• Object initializer
• Operator precedence
• (currently at stage 1) pipes the value of an expression into a function. This allows the creation of chained function calls in a readable manner. The result is syntactic sugar in which a function call with a single argument can be written like this:">Pipeline operator
• Property accessors
• Spread syntax
• async function expression
• class expression
• delete operator
• function expression
• function* expression
• in operator
• new operator
• void operator
• Legacy generator function
• async function
• for await...of
• for each...in
• function declaration
• import.meta
• try...catch
• Arrow functions
• Default parameters
• Method definitions
• Rest parameters
• The arguments object
• constructor
• element loaded from a different domain for which you violated the same-origin policy.">Error: Permission denied to access property "x"
• InternalError: too much recursion
• RangeError: argument is not a valid code point
• RangeError: invalid array length
• RangeError: invalid date
• RangeError: precision is out of range
• RangeError: radix must be an integer
• RangeError: repeat count must be less than infinity
• RangeError: repeat count must be non-negative
• ReferenceError: "x" is not defined
• ReferenceError: assignment to undeclared variable "x"
• ReferenceError: can't access lexical declaration`X' before initialization
• ReferenceError: deprecated caller or arguments usage
• ReferenceError: invalid assignment left-hand side
• ReferenceError: reference to undefined property "x"
• SyntaxError: "0"-prefixed octal literals and octal escape seq. are deprecated
• SyntaxError: "use strict" not allowed in function with non-simple parameters
• SyntaxError: "x" is a reserved identifier
• SyntaxError: JSON.parse: bad parsing
• SyntaxError: Malformed formal parameter
• SyntaxError: Unexpected token
• SyntaxError: Using //@ to indicate sourceURL pragmas is deprecated. Use //# instead
• SyntaxError: a declaration in the head of a for-of loop can't have an initializer
• SyntaxError: applying the 'delete' operator to an unqualified name is deprecated
• SyntaxError: for-in loop head declarations may not have initializers
• SyntaxError: function statement requires a name
• SyntaxError: identifier starts immediately after numeric literal
• SyntaxError: illegal character
• SyntaxError: invalid regular expression flag "x"
• SyntaxError: missing ) after argument list
• SyntaxError: missing ) after condition
• SyntaxError: missing : after property id
• SyntaxError: missing ; before statement
• SyntaxError: missing = in const declaration
• SyntaxError: missing ] after element list
• SyntaxError: missing formal parameter
• SyntaxError: missing name after . operator
• SyntaxError: missing variable name
• SyntaxError: missing } after function body
• SyntaxError: missing } after property list
• SyntaxError: redeclaration of formal parameter "x"
• SyntaxError: return not in function
• SyntaxError: test for equality (==) mistyped as assignment (=)?
• SyntaxError: unterminated string literal
• TypeError: "x" has no properties
• TypeError: "x" is (not) "y"
• TypeError: "x" is not a constructor
• TypeError: "x" is not a function
• TypeError: "x" is not a non-null object
• TypeError: "x" is read-only
• TypeError: 'x' is not iterable
• TypeError: More arguments needed
• TypeError: Reduce of empty array with no initial value
• TypeError: can't access dead object
• TypeError: can't access property "x" of "y"
• TypeError: can't assign to property "x" on "y": not an object
• TypeError: can't define property "x": "obj" is not extensible
• TypeError: can't delete non-configurable array element
• TypeError: can't redefine non-configurable property "x"
• TypeError: cannot use 'in' operator to search for 'x' in 'y'
• TypeError: cyclic object value
• TypeError: invalid 'instanceof' operand 'x'
• TypeError: invalid Array.prototype.sort argument
• TypeError: invalid arguments
• TypeError: invalid assignment to const "x"
• TypeError: property "x" is non-configurable and can't be deleted
• TypeError: setting getter-only property "x"
• TypeError: variable "x" redeclares argument
• URIError: malformed URI sequence
• Warning: -file- is being assigned a //# sourceMappingURL, but already has one
• Warning: 08/09 is not a legal ECMA-262 octal constant
• Warning: Date.prototype.toLocaleFormat is deprecated
• Warning: JavaScript 1.6's for-each-in loops are deprecated
• Warning: String.x is deprecated; use String.prototype.x instead
• Warning: expression closures are deprecated
• Warning: unreachable code after return statement
• X.prototype.y called on incompatible type
• JavaScript technologies overview
• Lexical grammar
• Enumerability and ownership of properties
• Iteration protocols
• Transitioning to strict mode
• Template literals
• Deprecated features
• ECMAScript 2015 support in Mozilla
• ECMAScript 5 support in Mozilla
• Firefox JavaScript changelog
• New in JavaScript 1.1
• New in JavaScript 1.2
• New in JavaScript 1.3
• New in JavaScript 1.4
• New in JavaScript 1.5
• New in JavaScript 1.6
• New in JavaScript 1.7
• New in JavaScript 1.8
• New in JavaScript 1.8.1
• New in JavaScript 1.8.5
• Documentation:
• All pages index
• Methods index
• Properties index
• Pages tagged "JavaScript"
• JavaScript doc status
• The MDN project

Learn the best of web development

Get the latest and greatest from MDN delivered straight to your inbox.

Thanks! Please check your inbox to confirm your subscription.

If you haven’t previously confirmed a subscription to a Mozilla-related newsletter you may have to do so. Please check your inbox or your spam filter for an email from us.