write dissertation abstract

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

Prevent plagiarism, run a free check.

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 6 May 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

• Features for Creative Writers
• Features for Work
• Features for Higher Education
• Features for Teachers
• Features for Non-Native Speakers
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Get started with ProWritingAid

Drop us a line or let's stay in touch via :

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Writing the Dissertation - Guides for Success: The Abstract

• Writing the Dissertation Homepage
• Overview and Planning
• The Literature Review
• The Methodology
• The Results and Discussion
• The Conclusion
• The Abstract
• An abstract is a brief summary of an academic text.
• Researchers use abstracts to make an informed decision of whether an article, dissertation or other academic text is relevant or applicable to their own work.
• Conventions for the content and structure of abstracts vary by field, so general guidance should be adjusted to match best practices of published writers in your discipline.

What is an abstract?

An  abstract  is a concise summary of an academic text such as a journal article, dissertation or thesis. It provides a 'snapshot' view of the overall text, from the research question through to the conclusion.

In thinking about how to write an abstract, it's helpful to consider why we  read  abstracts. We usually encounter abstracts while searching databases for articles to reference in our own research. Before we commit to reading the full-text of an article, we want to gauge whether that article will make a relevant contribution to our work or thinking. The abstract helps us make that decision by providing a quick, 'boiled down' preview of the entire piece.

In that sense, an abstract of an academic text can be likened to the trailer for a movie. Just as a movie trailer informs your choice to see or skip a certain film, an abstract can inform your choice to read or skip an academic text. However, unlike a movie trailer, an abstract  should  contain 'spoilers' (i.e., the key conclusions of the writing).

Standard criteria for an abstract

• Word count  –   The average abstract is about 200 words, but you should adjust this figure to match the context in which you are writing. For example, if submitting an article to a journal, you should follow that journal's publishing guidelines. Similarly, your school/faculty may suggest a word count for dissertation abstracts.
• Able to stand alone  – A reader should understand the key elements of your research or argument from the abstract itself. In other words, the abstract should make sense as an independent piece of writing even to those who haven't read the report/research that follows.
• Audience aware  – Because the main audience for your abstract will be other researchers in your field, you can use discipline-specific jargon or language as needed. You only need to 'rein in' the specialist language if you are writing for the general public rather than fellow researchers.

As a rule of thumb, the abstract will mirror the structure of the piece of writing that it is summarising. However, it will compress the 'main beats' into a single paragraph (rarely will an abstract be formatted as more than one paragraph). Therefore, one common structure for an abstract is as follows:

• Context  – Relevant research background (think of this like a literature review condensed into one or two sentences).
• Objective statement/research question  – What your research aims to do and/or what it sets out to answer.
• Methodology  – How your research was carried out (cut the minute detail and stick to broad strokes).
• Results  – What your methodology produced.
• Discussion  – Interpretation of your results, often in relation to the wider discourse or prior research.
• Implications/future research  – If relevant, an indication of your research's impact and/or suggestions for future study.
• Conclusion  – The takeaway or answer to the question, 'So what?'

Our Writing Abstracts video provides examples and explanations of how abstracts vary between academic disciplines (e.g. humanities, sciences, social sciences, arts, etc.), so please check it out to explore expectations in your subject area.  Our  Writing Across Subjects guide  provides further guidance for some fields.

The writing process

• Don't be afraid to overwrite, first.  You can always cut back, cut back, and cut back some more, so when writing your first draft of the abstract, don't worry about the word count.
• Pare anything superfluous.  Edit ruthlessly once you have that first draft. Treat adverbs with suspicion ('strongly suggests' = 'suggests', 'carefully analysed' = 'analysed', and so on). Use a thesaurus or phrase dictionary to find one-word substitutes for multi-word phrases. Be prepared to go through many rounds of culling!
• Share it.  Get someone unfamiliar with your research to read your abstract and then explain your project back to you. If this exercise goes well, you are on the right track.
• What/why/who/how?  You can produce a starting place for your abstract by answering these questions: what did you do; why did you do it; who else is doing similar things; how did you do it? Imagine someone has asked the questions in a lift – therefore, you have to keep your answers brief (i.e., a literal 'elevator pitch' of your work).

Abstracts for dissertations and theses

The above guidance all applies when writing the abstract for your dissertation or thesis. Remember to keep your subject area in mind and tailor your abstract to the expectations of your discipline.

The university provides Word templates to help you format your entire submission, including a dedicated page for your abstract. Access the dissertation template here, or access the  thesis template here.

For help producing the other sections of a long academic work, check out our Writing the Dissertation: Guides for Success resources,   which include guides, video workshops, checklists and more.

• << Previous: The Conclusion
• Last Updated: Apr 19, 2024 12:38 PM
• URL: https://library.soton.ac.uk/writing_the_dissertation

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

How to Write an Abstract for a Dissertation

At roughly 200 words, the abstract is the shortest part of the dissertation! Thankfully, it’s also one of the simplest to write – as long as you approach it sensibly…

The cardinal rule for writing an abstract is to leave it ‘til last. After all, the abstract is a summary of the entire dissertation, so it makes sense to leave it until the end.

Having said that, it’s a good idea to prepare yourself. If you learn how to write an abstract well ahead of time, there’ll be no last-minute panics. With that in mind, let’s run through the basics of writing a dissertation abstract.

What is the purpose of an abstract?

As mentioned, the abstract is essentially a summary of your dissertation. Think of it like a film synopsis or a book blurb. In roughly 200 words, it should tell the reader exactly what to expect from reading your dissertation.

A good abstract will also hint at the relevance and usefulness of the project. Indeed, in many ways, the abstract is an opportunity for you to ‘sell’ your project to the reader. The more compelling the abstract is, the more likely they are to read your dissertation.

What should an abstract include?

Later on, we’ll show you exactly how to structure an abstract. But first, it’s important to understand the elements of an abstract. In brief, an abstract should:

• Intrigue – In the first few sentences, you should introduce your topic to the reader, and highlight a key debate or issue that inspired the dissertation. If you can intrigue your reader in the opening sentence, they’re much more likely to continue reading!
• Convince – You’ll then need to convince your reader that your dissertation is necessary and worthwhile. Often, this is achieved by explaining how your dissertation extends or challenges the existing literature.
• Describe – You should describe the research methods very briefly but accurately.
• Inform – The abstract should be informative, particularly in relation to the findings of the study. It is not necessary to state all the findings, but you should highlight the key insights.
• Demonstrate relevance and usefulness – As mentioned, a good abstract finishes by saying who will find this research useful and why. Occasionally, it may also suggest directions for future research.

Remember, since the abstract is a summary of a project you’ve completed, it should be written in the present or past simple tense .

How should you structure an abstract?

The structure of an abstract can vary depending on the subject you are studying at university. Also, some universities have specific guidelines for writing an abstract, so always check with your tutor first. In particular, APA style has quite specific rules for formatting an abstract.

Though, generally speaking, the following structure is a good starting point for students in most subject areas:

1. Provide some background

The first 1-2 sentences should provide a very brief background to your topic of study. Remember, the aim is to intrigue here. These sentences are usually written in the present tense.

2. Refer to existing debates

Next, you should briefly explain the existing theory/research that has informed your chosen topic. If there are any key debates relevant to your topic, briefly mention them here. Try to limit this to 1-2 sentences and stick with the present or past tense.

3. Explain why the dissertation was worthwhile

In the next sentence or two, you’ll need to convince your reader that this study was worthwhile. Try to use the previous few sentences as a springboard, but explain why your study was unique.

4. State your research question

If it was not stated in the last section, the next sentence should clearly state your research question. You may have had more than one research question/research aim, but try to be as succinct as possible here.

5. State the methodology

In this sentence, you should clearly describe the methodology used . There is no need to explain why this method was chosen; just be as precise and succinct as possible.

6. State the key findings

The next sentence should explain the findings of your dissertation. Try not to be too technical here as your reader may be a novice. Also, there probably won’t be space to state all your findings, so present the ones that are most relevant and interesting. In fact, leaving a bit to the imagination is a good thing because it should intrigue the reader…

7. State who will find this research useful and why

In the last sentence, you should explain the usefulness and relevance of your dissertation. Consider: Who will benefit from this research? Does it have any practical applications?

8. List of keywords

Depending on your subject, you may be expected to provide a short list of keywords. This is common in Psychology research, for example. Check with your tutor if keywords are necessary. Remember, these should be listed in alphabetical order underneath the body of the abstract.

What’s the secret to writing a great abstract?

So, we’ve covered the basics of writing an abstract, but how can you write a first-class dissertation abstract? Well, we have two pieces of advice.

Firstly, be precise and succinct. Once you’ve written your abstract, you should set it aside for at least 24 hours, and then return to it with fresh eyes. As you read through it, cut out anything that’s not absolutely essential. Also, consider rewording sentences so that they are clear and readable. You can use our disseration writing services to help you with this.

Secondly, when you reveal your findings, try to find the right balance between revealing too much and revealing too little. It’s important to demonstrate that your study was interesting and relevant, but if you reveal too much, the reader may not want to bother reading your dissertation.

Indeed, writing a good dissertation is all about taking your reader on a journey and building momentum as you go. If you can manage this, you’ll keep your reader’s attention until the very last page! Creating this balance is not easy but it is a skill that can be developed through practice.

Common mistakes to avoid

So, we’ve reviewed the components of a good dissertation abstract. But what constitutes a bad abstract? Let’s finish by exploring some of the common mistakes students make when writing an abstract:

• Too long – Generally speaking, an abstract should be between 150 and 250 words, and it should fit on one page. If you make it too long, it won’t be compelling, and it’ll probably just confuse the reader.
• Lack of relevant keywords in the body of the abstract – Although an abstract should be written in reasonably non-technical language, it should include some relevant keywords. E.g. In the above example “Green marketing” and “Green purchasing behaviour” were pertinent keywords. Using appropriate keywords shows you’ve done wider reading and you understand where your project ‘fits in’ to the literature. Also, if your research were to be published, keywords would help other researchers to find it.
• Written in the wrong tense – A common mistake students make is that they write their abstract in the future tense (I.e. “This dissertation will explore the relationship between…”). The research has already been conducted, so it should be written in the past tense.
• Wrong positioning – The abstract should go after the title page and before the contents page.
• References and quotes – Generally speaking, an abstract should not contain references or quotations from other theorists. The only exception might be if your dissertation was solely focused on one particular theory/debate. In that case, keep quotes and references to an absolute minimum – your introduction and literature review will provide a comprehensive description of the theory!

You may also like

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings? In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 408 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• EXPLORE Random Article

How to Write a Dissertation Abstract

Last Updated: March 6, 2020 References

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 23,121 times.

An abstract is a small summary of a larger paper. A dissertation is a long research paper with an original argument that you must write to graduate with a Master’s degree or doctorate. An abstract helps give your reader a map of your paper before he or she reads it. It also helps researchers to know if your paper will be helpful to them before they expend time reading it. Therefore, you should try to write as clear an abstract as possible, in simple and concise language.

Including the Necessary Information

• Start with your main thesis at the top.
• Next, read each section of your paper. As you read, write a one-sentence summary of each major chapter or section. Keep them in order on your paper. Regardless of your discipline, take time to point out the key theorists in the discipline you’ll be exploring in your paper.
• Include a summary of your conclusions, as well.
• If you’re writing an abstract for a scientific dissertation, it’s not necessary to include all of your literature review; however, you might include a sentence on how your paper fits into the larger academic discussion.

• Discuss how your research fits into the larger academic discussion.
• Talk about your methodology.
• Include your conclusions.
• Take time to discuss how it could lead to further research.

• Include any major works you’re analyzing. In other words, provide a short discussion of the source material, whether it’s the diaries of a famous historical figure for a history dissertation, a work of literature, a piece of music, or a great work of art.
• Discuss the major theories you’re applying to make your argument.
• Cover your main argument.
• Talk about your conclusions.

• Include any methodology you used to conduct research.
• Provide an overview of any studies you conducted, including participants and the purpose of the study.
• Discuss major theories that you are using for analyzing your work, as well as how your research fits into the larger discussion. Remember to keep it brief.
• Don’t forget to discuss your conclusions, as well as how your research could lead to further research.

• Include major theories you are using to analyze your research.
• Talk about your research methods, especially if you are collecting data.
• Provide specifics if you are looking at a particular company or analyzing a particular model.
• Discuss your overall conclusions.

Writing Your Abstract

• The name of the article you have written.
• Publication information, if there is any.

• Remember, you’re just trying to give your reader an overview of your dissertation, not every detail.

• You should also include the sentence about your conclusion.

• Remember, you are not just summarizing your individual thoughts in your abstract, you are recreating the argument you make in your paper in a shortened form.

• For instance, if you’re an archaeologist, you need to reference your primary materials.
• If you’re a librarian, you should talk about the methods you’ve used to collect your research.
• If you’re a psychologist, talk about the way you conducted your study.

• Only include information that is in the paper; do not bring new ideas into the abstract.

• The way you implement your research in science includes methodology (how you carried out your experiment), but in a humanities paper, you’ll likely be talking about the theories you applied in your research (such as applying Foucault’s theories to a book like Wuthering Heights).

Expert Q&A

• If you wrote a scientific, sociological, or psychological dissertation (or any other type of dissertation requiring field research), be sure to include information on your methodology. Thanks Helpful 0 Not Helpful 0
• If you’re writing an abstract on a literature paper, be sure to include the major works you’re reviewing. Thanks Helpful 0 Not Helpful 0
• You can use some technical language if it is a technical paper. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ http://www.sciencebuddies.org/science-fair-projects/project_abstract.shtml
• ↑ http://writingcenter.unc.edu/handouts/abstracts/
• ↑ http://libguides.usc.edu/content.php?pid=83009&sid=621164
• ↑ http://librarybissell.act.edu/content.php?pid=136789&sid=1171531
• ↑ http://users.ece.cmu.edu/~koopman/essays/abstract.html
• ↑ https://owl.english.purdue.edu/owl/resource/656/01/

About this article

To write a dissertation abstract, start with a condensed version of your thesis that's no more than 1 sentence long. Then, include sentences about the methodology you used for your research and any major points or theories you analyzed. You should also include a sentence about the conclusions you drew based on your research. In general, try to keep your dissertation abstract between 100 and 200 words. To learn how to use an outline of your dissertation to write your abstract, keep reading! Did this summary help you? Yes No

Did this article help you?

• About wikiHow
• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

• How it works

How to Write an Abstract for a Dissertation

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

Dissertation Abstract – Definition

The abstract is regarded as the foremost component of a dissertation. It will be your first chance to set precise expectations for the supervisor, examiner or graduate committee members. An abstract for a dissertation is the first real significant narrative of your work and is placed at the beginning of the dissertation paper.

Presented in a shortened form, an abstract is a very brief overview of your research .

In this article, we will uncover every piece of information you need to know to write an abstract.  

According to the online archives of Simon Fraser University research database, “an abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there are insufficient time and space for the full text. ”

Do I Need to Write an Abstract?

You will be required to include an abstract at the beginning of your paper if you are working on your thesis, dissertation, research paper, or publishing a paper in any academic journal.

Even though the abstract appears right at the start of a dissertation paper, it is generally written at last. For it is only after you have compiled all the evidence and data, interpreted every piece of finding, backed your interpretation(s) with enough theoretical evidence and answered your research questions, that you can sum it all up in 150-200 words. The general length of an abstract.

 The table of contents is the section that immediately follows an abstract. Here is a guide on how to create a table of contents for the dissertation .

Your abstract should be an  entirely autonomous and independent text and never be an extract taken from within the paper’s original content. This also implies, indirectly, that it is unethical in research contexts to copy-paste chunks from within your own research in an abstract.

In particular, an abstract aims to provide an overview of research aim and objectives, methods of research employed, results obtained, findings, most salient interpretation(s), the conclusion and implication(s) of your research. Readers should be able to completely understand all aspects of your research work just by reading your abstract.

Also Read : How to Write Dissertation Discussion Chapter , How to Write a Remarkable Dissertation?

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

Now you can pay in up to 4 installments

How to Write a Dissertation Abstract

A dissertation abstract serves as a deal maker or breaker when it comes to making a strong impression on your readers. Your dissertation abstract can either motivate your readers to continue reading or discourage them from  moving on to the next chapters .

The abstract of a dissertation needs to be conspicuous, meaningful, interesting and of course, informative. It should contain brief but relevant information from all chapters of your dissertation to provide a brief overview of the research that has been conducted. This would mean its:

• What (topic statement of your research)
• Who (the sample)
• Why (the significance/objectives/aims/questions/hypothesis of your research)
• Where (the background/setting of your research)
• And how (the research design/tools/methods/methodologies etc. of your research)

 Here, we have put together some guidelines for students to understand how to write an abstract for a dissertation to make a great first impression on readers.

Key Components of a Dissertation Abstract

The  key elements of a dissertation abstract are as follows:

• Background statement/problem statement/thesis statement
• Information regarding research sample
• Methods of research employed
• A brief description of the results obtained and their interpretation (only the most important one(s))
• A summary of conclusion, limitations and future recommendations/implications (only the most salient ones)

1. Background/Problem Statement/Aims and Objectives

The first couple of sentences of your dissertation abstract should provide a summary of the purpose of your research. This can be expressed as follows:

• Background statement – Provide a brief perspective on the theoretical and practical significance of your work.
• The problem statement clearly communicates to the readers why there was a need to research the chosen topic.
• Present an overview of the research’s aim and objectives to establish what your research intended to achieve.
• Thesis statement – what is the main idea of your dissertation paper? What are your claims in reference to the established research questions?

Avoid writing this part of the abstract in future tense because it refers to concluded actions.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Also read: How to Get Dissertation Deadline Extension – Some Practical Methods.

This one-to-two lined section will give information about who the sample in your study was; where they are located/residing, etc. The reasons for selecting that group of participants, for instance, is not relevant for mention in an abstract.

3. Research Methods

Briefly specify your  dissertation research methodology immediately after stating the purpose and sample of your dissertation paper. Here, you will be expected to summarise how you straightforwardly conducted your research.

Like the first section, a description of research  methods should also be written in the simple past tense. There is absolutely  no need to highlight the limitations and/or validity  of your research methods here.

The goal is to take the readers through the overall approach and process quickly.

4. Research Findings

Provide a brief overview of the major  findings of your dissertation study . If you think you undiscovered multiple major findings, only mention the ones that directly answer a research question or two that was/were part of your study to begin with. For instance, if you studied the relation between two variables and your findings indicate it’s a positive correlation, you simply state that finding, not the other, minor ones related to this specific one.

This section is the crux of your abstract, so make sure you demonstrate how your research addressed the research objectives.

Furthermore, due to the word limit (150-200) of the abstract and the complexity of your research, you might not be able to include all results here. If that is the case, have only the most significant results.

This portion should be written in the past simple or present tense. Here is an example:

• Analysis of the responses has shown that there is a strong correlation between consumption and productivity.
• Analysis of the responses shows there is a strong correlation between coffee consumption and productivity.
• Analysis of the responses showed there was a strong correlation between coffee consumption and productivity.

5. Conclusion and Recommendation/Implication

Lastly, the  abstract of a dissertation  should  conclude your dissertation research . The conclusion should clearly report how your study addressed the research problem.

Use this part of the abstract to convince people how your research proved the argument or theory your research was built on and started off with.

Provide recommendations for practical implementation to clearly understand your audience how your work will solve the problem at hand.

Finally, do not forget to mention important research limitations briefly. For example, selecting a smaller sample size due to some constraints would be a limitation worth mentioning. This will add more weight and credibility to your research.

Make use of the present simple test when writing the conclusion.

Some institutions, however, dictate that you write one or two lines about the long- or short-term implications your research might have. This component would be the last one in an abstract, preceded by the conclusive statement.

Abstract keywords/phrases 

You might be asked to include important key terms and phrases at the end of the abstract, especially if your paper has been selected for publication in an academic journal.

These keywords help potential readers find your paper in search engines during their  desk-based research .

However, it should be noted that some academic journals have their own specific formatting requirements for keywords. It’s recommended that you read the requirements about keywords in their publication manuals to avoid any misunderstanding.

More on Abstract keywords

According to Hartley and Kostoff (2003), following are some different methods for supplying keywords for an abstract:

Researchers “supply them with no restrictions on the numbers allowed; supply up to a fixed number (e.g. six); supply key words as appropriate from a specified list; editors supplement/amend authors’ key words; editors supply key words; editors supply key words from a specified list; referees supply key words from a specified list; keywords are allocated according to the ‘house-rules’ applied to all journals; distributed by a specific publisher; keywords are determined by computer program at proof stage”.

Format of a Dissertation Abstract

The typical size of an abstract for a masters’ dissertation is 300-400 words whereas abstracts for undergraduate dissertation papers are 150-200 words in size.

Since their findings are generally more in number, abstracts for PhD-level dissertation papers are assigned 300-350 words. The dissertation abstract structure should be such that there are one or two sentences assigned to each chapter of the dissertation.

For example, if your dissertation paper has 5 chapters, there should be a minimum of 8-10 sentences in the abstract to provide a reflective summary of each chapter’s information.

As is the case  with the dissertation introduction chapter , you will be expected to specify the research questions clearly.

You might need to rearrange them and/or reduce the word count without missing out on any important element, considering there is room for only two to three research questions generally placed at the beginning of the abstract.

  Poor dissertation abstracts don’t present the findings of the research. It is important to recognize that the readers of your dissertation paper will be more interested in what findings you came up with as a result of your research and not merely what you did. Use at least 2 to 3 sentences for summarising the results and their interpretation.

Look for the formatting requirements in your dissertation handbook or writing guidelines provided by your school. Make sure to stay within the permissible word limit.  An abstract too long or too short will not serve the purpose.

Tips on How to Write the Abstract for Dissertation

Condensing your entire dissertation into just a few sentences can be a daunting task, especially if it’s your first time writing a dissertation abstract.

It is important to get your dissertation abstract right because this part of the dissertation paper is the first real piece of written description that your audience will read. You can even recall some of your own experiences where, due to shortage of time or many deadlines looming above your head, you had to skim and scam the abstract of a research article or journal paper you stumbled across. It probably gave you a good enough idea whether it was worth it to bookmark that paper to read fully later now, didn’t it?

That’s exactly the kind of effect your own abstract should have on its readers, too. It’s meant to give a holistic view of the entire research.

Here are some tips for you to make sure you write this part to the highest possible academic quality:

Also Read: Different Research Methods for Dissertation?

Tip #1: Avoid Citing Publications

Student researchers often get carried away with the research of professional researchers when writing an abstract. Avoid focusing on others’ work and demonstrate how your own research will substantially contribute to your area of study.

Depending on the allowable word limit for the abstract, you might be able to squeeze in a sentence or two about the scholarly background of the research problem you wish to address. Still, there is no need to cite any publications.

Tip #2: Be Concise and to-the-point

Your dissertation abstract should be attention-grabbing, even though you will have only a few hundred words to work with. So. it is crucial to communicate your research work in the most concise manner.  Never stuff your dissertation abstract with needless words and avoid vague verbiage that might put your readers off-track.

 Need help with writing a killer dissertation abstract? Our writers can write an abstract for a dissertation following your school’s guidelines. Or get help from our expert academics  with any part of your dissertation.

Tip # 3: Read Sample Abstracts

Learn the art of writing great dissertation abstract by reading abstract dissertation samples. It would make sense to look at how other people in your academic subject have written their abstracts.

If you have already conducted your  dissertation literature review , you might have already read many research paper abstracts – which you could use to get useful insights into how to format your dissertation abstract. Here is an abstract dissertation example to help you get started.

Tip #4: Coverage and Presentation

Remember, an abstract is one single paragraph. There are no breaks in it. It continues as a single body. Furthermore, it is written in a separate page. No other chapter or sub-headings etc. come before or after the abstract on the same page. There are also no headings – such as the topic of your research – above the title ‘Abstract’ on the abstract page. Simply give the heading of ‘Abstract’ and start it off from there. And last but not the least, another important thing to keep in mind is that abstract (pretty much like the rest of your thesis) will be double-spaced.

Tip #5: Language

Other researchers will look for key terms specific to your research field to figure out the purpose and nature of your dissertation paper. Make sure to include relevant terminology necessary for understanding your abstract and thereby determining what the research was about.

Tip #6: Shortening a Lengthy Abstract

It’s natural to sometimes get carried away while writing…even in academic writing. As Trochim and other writers state in their book, Research Methods: The Essential Knowledge Base , “In order to shorten your abstract, you should eliminate nonessential information wherever possible—this includes transitions phrases (e.g., ‘the results demonstrate . . .’).”

Can I use an excerpt from the paper as an abstract?

No, you should not. It is important for an abstract to be an entirely autonomous and independent text and never be an extract taken from within the paper’s original content. Write it in your own words, 

What is the purpose of an abstract?

The abstract of your dissertation provides a brief overview of the research conducted and the results obtained.

What should a dissertation abstract contain?

The abstract of your dissertation must give background information, mention the problem statement , research aims , and objectives, sample information, methods of research , the findings , conclusion and recommendations/implications.

Can I cite a reference in the abstract?

No, you must never cite any reference in the abstract.

You May Also Like

Dissertation Methodology is the crux of dissertation project. In this article, we will provide tips for you to write an amazing dissertation methodology.

Dissertation conclusion is perhaps the most underrated part of a dissertation or thesis paper. Learn how to write a dissertation conclusion.

Not sure how to start your dissertation and get it right the first time? Here are some tips and guidelines for you to kick start your dissertation project.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

How to tackle the PhD dissertation

Finding time to write can be a challenge for graduate students who often juggle multiple roles and responsibilities. Mabel Ho provides some tips to make the process less daunting

• More on this topic

Created in partnership with

You may also like

Popular resources

.css-1txxx8u{overflow:hidden;max-height:81px;text-indent:0px;} Analytical testing is the key to industry collaborations

Is it time to turn off turnitin, use ai to get your students thinking critically, taming anxiety around public speaking, emotions and learning: what role do emotions play in how and why students learn.

Writing helps you share your work with the wider community. Your scholarship is important and you are making a valuable contribution to the field. While it might be intimidating to face a blank screen, remember, your first draft is not your final draft! The difficult part is getting something on the page to begin with. 

As the adage goes, a good dissertation is a done dissertation, and the goal is for you to find balance in your writing and establish the steps you can take to make the process smoother. Here are some practical strategies for tackling the PhD dissertation.

Write daily

This is a time to have honest conversations with yourself about your writing and work habits. Do you tackle the most challenging work in the morning? Or do you usually start with emails? Knowing your work routine will help you set parameters for the writing process, which includes various elements, from brainstorming ideas to setting outlines and editing. Once you are aware of your energy and focus levels, you’ll be ready to dedicate those times to writing.

While it might be tempting to block a substantial chunk of time to write and assume anything shorter is not useful, that is not the case. Writing daily, whether it’s a paragraph or several pages, keeps you in conversation with your writing practice. If you schedule two hours to write, remember to take a break during that time and reset. You can try:

• The Pomodoro Technique: a time management technique that breaks down your work into intervals
• Taking breaks: go outside for a walk or have a snack so you can come back to your writing rejuvenated
• Focus apps: it is easy to get distracted by devices and lose direction. Here are some app suggestions: Focus Bear (no free version); Forest (free version available); Cold Turkey website blocker (free version available) and Serene (no free version). 

This is a valuable opportunity to hone your time management and task prioritisation skills. Find out what works for you and put systems in place to support your practice. 

• Resources on academic writing for higher education professionals
• Stretch your work further by ‘triple writing’
• What is your academic writing temperament?

Create a community

While writing can be an isolating endeavour, there are ways to start forming a community (in-person or virtual) to help you set goals and stay accountable. There might be someone in your cohort who is also at the writing stage with whom you can set up a weekly check-in. Alternatively, explore your university’s resources and centres because there may be units and departments on campus that offer helpful opportunities, such as a writing week or retreat. Taking advantage of these opportunities helps combat isolation, foster accountability and grow networks. They can even lead to collaborations further down the line.

• Check in with your advisers and mentors. Reach out to your networks to find out about other people’s writing processes and additional resources.
• Don’t be afraid to share your work. Writing requires constant revisions and edits and finding people who you trust with feedback will help you grow as a writer. Plus, you can also read their work and help them with their editing process.
• Your community does not have to be just about writing!  If you enjoy going on hikes or trying new coffee shops, make that part of your weekly habit.  Sharing your work in different environments will help clarify your thoughts and ideas.

Address the why

The PhD dissertation writing process is often lengthy and it is sometimes easy to forget why you started. In these moments, it can be helpful to think back to what got you excited about your research and scholarship in the first place. Remember it is not just the work but also the people who propelled you forward. One idea is to start writing your “acknowledgements” section. Here are questions to get you started:

• Do you want to dedicate your work to someone? 
• What ideas sparked your interest in this journey? 
• Who cheered you on? 

This practice can help build momentum, as well as serve as a good reminder to carve out time to spend with your community. 

You got this!

Writing is a process. Give yourself grace, as you might not feel motivated all the time. Be consistent in your approach and reward yourself along the way. There is no single strategy when it comes to writing or maintaining motivation, so experiment and find out what works for you. 

Suggested readings

• Thriving as a Graduate Writer by Rachel Cayley (2023)
• Destination Dissertation by Sonja K. Foss and William Waters (2015)
• The PhD Writing Handbook by Desmond Thomas (2016).

Mabel Ho is director of professional development and student engagement at Dalhousie University.

If you would like advice and insight from academics and university staff delivered direct to your inbox each week,  sign up for the Campus newsletter .

Analytical testing is the key to industry collaborations

A framework to teach library research skills, contextual learning: linking learning to the real world, how hard can it be testing ai detection tools, chatgpt’s impact on nursing education and assessments.

Register for free

and unlock a host of features on the THE site

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Welcome to the Purdue Online Writing Lab

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

The Online Writing Lab at Purdue University houses writing resources and instructional material, and we provide these as a free service of the Writing Lab at Purdue. Students, members of the community, and users worldwide will find information to assist with many writing projects. Teachers and trainers may use this material for in-class and out-of-class instruction.

The Purdue On-Campus Writing Lab and Purdue Online Writing Lab assist clients in their development as writers—no matter what their skill level—with on-campus consultations, online participation, and community engagement. The Purdue Writing Lab serves the Purdue, West Lafayette, campus and coordinates with local literacy initiatives. The Purdue OWL offers global support through online reference materials and services.

A Message From the Assistant Director of Content Development 

The Purdue OWL® is committed to supporting  students, instructors, and writers by offering a wide range of resources that are developed and revised with them in mind. To do this, the OWL team is always exploring possibilties for a better design, allowing accessibility and user experience to guide our process. As the OWL undergoes some changes, we welcome your feedback and suggestions by email at any time.

Please don't hesitate to contact us via our contact page  if you have any questions or comments.

All the best,

Social Media

Facebook twitter.

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Thesis / dissertation formatting manual (2024).

• Filing Fees and Student Status
• Submission Process Overview
• Electronic Thesis Submission
• Paper Thesis Submission
• Formatting Overview
• Fonts/Typeface
• Pagination, Margins, Spacing
• Paper Thesis Formatting
• Preliminary Pages Overview
• Copyright Page
• Dedication Page
• Table of Contents
• List of Figures (etc.)
• Acknowledgements
• Text and References Overview
• Figures and Illustrations
• Using Your Own Previously Published Materials
• Using Copyrighted Materials by Another Author
• Open Access and Embargoes
• Copyright and Creative Commons
• Ordering Print (Bound) Copies
• Tutorials and Assistance
• FAQ This link opens in a new window

UCI Libraries maintains the following  templates to assist in formatting your graduate manuscript. If you are formatting your manuscript in Microsoft Word, feel free to download and use the template. If you would like to see what your manuscript should look like, PDFs have been provided. If you are formatting your manuscript using LaTex, UCI maintains a template on OverLeaf.

• Annotated Template (Dissertation) 2024 PDF of a template with annotations of what to look out for
• Word: Thesis Template 2024 Editable template of the Master's thesis formatting.
• PDF Thesis Template 2024
• Word: Dissertation Template 2024 Editable template of the PhD Dissertation formatting.
• PDF: Dissertation Template 2024
• Overleaf (LaTex) Template
• << Previous: Tutorials and Assistance
• Next: FAQ >>
• Last Updated: Feb 20, 2024 2:09 PM
• URL: https://guides.lib.uci.edu/gradmanual

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Recommended guidelines for the extended abstract to a dissertation compiled of articles

Discussed by the Programme Council for organised research training (doctoral programme) during the meeting dated 1 December 2008, with the approval of the Dean on 5 February 2009. Adjusted during the meeting held by the Programme Council on 21 September 2011, approved by the Dean on 18 October 2011, , adjusted in September 2017 and  approved by the Dean on 2 October 2017.

The final work on the extended abstract should take place towards the end of the work on the doctoral degree. However, the extended abstract shall provide an outline of the work, so that a comprehensive perspective is laid out at an early stage of the working process. The introductory work required for the extended abstract may help raise awareness of the overall perspective required for the dissertation. At the same time, it is perfectly natural for the extended abstract to be modified during the process in relation to the development in form and content of the articles.

Below you will find some recommended items you are advised to follow

• The extended abstract shall outline and give reasons for the theoretical perspectives, the issues and the conclusions presented in the articles, so that the dissertation can be presented as a whole. The extended abstract shall categorize the results of the individual articles so that it illustrates the internal cohesion between these pieces of work.
• The extended abstract shall illustrate and summarise the contribution made by the dissertation to the research field in question. The extended abstract shall substantiate the choice of research issue and/or hypotheses.
• Both the complexity and nuances of individual results shall be discussed in the light of methodical, scientific theory and theoretical issues. The extended abstract must contain the necessary level of theoretical and methodical evaluations related to the work on the doctoral degree as long as this is not outlined and discussed in articles in the dissertation. The extended abstract shall also indicate where to locate definitions or detailed explanations of individual subjects within the dissertation.
• The extended abstract shall highlight and discuss the ethical aspects of the work.
• The extended abstract shall contain academic updates when required in relation to the articles' publication date or date of completion.
• The extended abstract shall be compiled by the doctoral candidate alone.
• The extended abstract shall have a maximum scope of between 40 – 60  pages, excluding references and appendices.
• Please discuss the extended abstract with your supervisor.
• Share on Facebook
• Share on Twitter

• YouTube Summaries

Mastering Your Dissertation Abstract: A Step-by-Step Guide

Writing the abstract for your dissertation marks the final push towards the completion of a monumental academic endeavor. The abstract, a succinct summary of your lengthy work, is not just a formality but a crucial component that encapsulates your research's essence. Jessica from Scribbr is here to steer you through this critical task with practical steps and an illustrative example. Let's dive into the art of crafting an effective dissertation abstract that makes your research stand out.

What is an Abstract?

An abstract is a concise summary of a larger work, like a dissertation or a research paper, typically ranging between 150 to 300 words. It's vital to adhere to the specific requirements set by your university or intended journal regarding the abstract's length. Positioned on a separate page, the abstract precedes the main text in your dissertation, coming right after the title page and acknowledgements but before the table of contents.

Crafting Your Abstract: Essential Components

The purpose of your research.

Begin by defining the purpose of your research, addressing the practical or theoretical problem it solves or the question it aims to answer. Providing a brief context of your topic's relevance is crucial, but avoid delving into extensive background information.

Your Research Objectives

State your research objectives clearly, employing verbs like investigate , test , analyze , or evaluate to describe your actions precisely. Remember, this section should be penned in the present or past simple tense, steering clear of future tense since the research is concluded.

Research Methods

Outline the methods you employed succinctly, limiting the description to one or two sentences. This section is typically written in the past simple tense, reflecting on the completed actions.

Key Results or Arguments

Summarize the chief results or arguments of your research, focusing on the findings that underscore your conclusions. Depending on the scope of your research, it might be challenging to include every result; prioritize the most significant ones.

Conclude your abstract by stating your research's main conclusions, clearly articulating your response to the posed problem or question. Conclusions are generally written in the present simple tense.

Limitations and Keywords

Briefly mention any significant limitations of your research to allow readers to accurately gauge its credibility and generalizability. If your paper is to be published, consider including a list of keywords at the abstract's end to facilitate discovery during literature searches. Follow specific formatting guidelines, like those of APA Style, for the keywords.

Final Touches: Proofreading and Revising

After composing your abstract, it's imperative to proofread and revise it to ensure clarity and adherence to guidelines. Utilizing a professional proofreading service can help eliminate language errors, refine your structure, and enhance your academic style.

Crafting an abstract is the last step in the long journey of your dissertation writing. By following this guide, you'll be able to create a compelling and concise abstract that effectively communicates the core of your research. Remember, the abstract is often the first (and sometimes the only) part of your work that readers engage with, making it your chance to make a strong impression.

For further assistance and resources, including how to format an APA style abstract, visit Scribbr's official website . And don't forget to proofread and revise your abstract to perfection before submission. Now, take a deep breath, finalize that abstract, and step forward towards the completion of your academic milestone.

Watch the full video for more details and examples: How to Write a Dissertation Abstract .

Ready to automate your content creation with AI?

To please Putin, universities purge liberals and embrace patriots

Russian university leaders are imbuing the country’s education system with patriotism to favor Putin, quashing Western influences and dissent.

Two weeks before the start of his 25th year as Russia’s supreme political leader, Vladimir Putin made a sweeping proclamation: “Wars are won by teachers.”

The remark, which Putin repeated twice during his year-end news conference in December, shed light on a campaign he is waging that has received little attention outside wartime Russia: to imbue the country’s education system with patriotism, purge universities of Western influences, and quash any dissent among professors and students on campuses that are often hotbeds of political activism.

At St. Petersburg State University, this meant dismantling a prestigious humanities program called the Faculty of Liberal Arts and Sciences. For more than a decade, until May 2022, the faculty — or college — was led by Alexei Kudrin, a liberal economist and former finance minister who had been a close associate of Putin’s since the early 1990s, when they were deputy mayors together in St. Petersburg.

“We had many classes on U.S. history, American political life, democracy and political thought, as well as courses on Russian history and political science, history of U.S.-Russian relations, and even a course titled ‘The ABCs of War: Causes, Effects, Consequences,’” said a student at the faculty, also known as Smolny College. “They are all gone now,” the student said, speaking on the condition of anonymity for fear of retribution.

About this series

In a radical reshaping of Russia’s education system, curriculums are being redrawn to stress patriotism and textbooks rewritten to belittle Ukraine, glorify Russia and whitewash the totalitarian Soviet past. These changes — the most sweeping to schooling in Russia since the 1930s — are a core part of Putin’s effort to harness the war in Ukraine to remaster his country as a regressive, militarized state.

Since the February 2022 invasion of Ukraine, leaders of Russian universities, which are overwhelmingly funded by the state, have zealously adopted the Kremlin’s intolerance of any dissent or self-organization, according to an extensive examination by The Washington Post of events on campuses across Russia, including interviews with students and professors both still in the country and in exile.

Professors who spoke out against the war, or allowed safe spaces for students to question it, have been fired. Students who picketed or posted on social media for peace were expelled.

Meanwhile, those who volunteer to fight in Ukraine have been celebrated in line with Putin’s promises that war heroes and their descendants will become the new Russian elite, with enhanced social benefits, including special preference for children seeking to enter top academic programs. Normally, such programs require near-perfect grades and high scores on competitive exams — uniform standards that applicants from all societal backgrounds have relied on for decades.

And the most fundamental precept of academic life — the freedom to think independently, to challenge conventional assumptions and pursue new, bold ideas — has been eroded by edicts that classrooms become echo chambers of the authoritarian nativism and historical distortions that Putin uses to justify his war and his will.

As a result, a system of higher learning that once was a beacon for students across the developing world is now shutting itself off from peer academies in the West, severing one of the few ties that had survived years of political turbulence. Freedom of thought is being trampled, if not eradicated. Eminent scholars have fled for positions abroad, while others said in interviews that they are planning to do so.

At the Russian State University for the Humanities in Moscow, officials last July created the Ivan Ilyin Higher Political School, which is now being led by Alexander Dugin, a fervent pro-Putin and Orthodox Christian ideologue who was tasked with “revising domestic scientific and educational paradigms and bringing them into line with our traditional Russian spiritual and moral values.”

“There has been a catastrophic degradation in Western humanitarian history,” Dugin said at a January seminar on transforming Russian humanities education. “This is evidenced by gender problems, postmodernism and ultraliberalism. We can study the West, but not as the ultimate universal truth. We need to focus on our own Russian development model.”

How we reported ‘Russia, Remastered’

Last month, students pushed an online petition to protest the naming of the school after Ilyin, a philosopher who defended Hitler and Mussolini in World War II and advocated for the return of czarist autocracy in Russia. In a statement to Tass, the state-controlled news service, the university denounced the petition as “part of the information war of the West and its supporters against Russia” and asserted, without providing evidence, that the group behind it had no connection to students at the school.

Programs specializing in the liberal arts and sciences are primary targets because they are viewed as breeding grounds for dissent. Major universities have cut the hours spent studying Western governments, human rights and international law, and even the English language.

“We were destroyed,” said Denis Skopin, a philosophy professor at Smolny College who was fired for criticizing the war. “Because the last thing people who run universities need are unreliable actors who do the ‘wrong’ thing, think in a different way, and teach their students to do the same.”

The demise of

Smolny College

The demise of Smolny College

St. Petersburg State University, commonly known as SPbU, has long been one of Russia’s premier academies of higher learning. It is the alma mater of both Putin, who graduated with a degree in law in 1975, and former president Dmitry Medvedev, who received his law degree 12 years later and now routinely threatens nuclear strikes on the West as deputy chairman of Russia’s national security council.

In many ways, the university has become the leader in reprisals against students and staff not loyal to the Kremlin, with one newspaper dubbing it the “repressions champion” of Russian education. Its halls have become a microcosm of modern Russia in which conservatives in power are pushing out the few remaining Western-oriented liberals.

Like other aspects of Putin’s remastering of Russia — such as patriotic mandates in the arts and the redrawing of the role of women to focus on childbearing — the shift in education started well before the invasion of Ukraine. In 2021, Russia ended a more than 20-year-old exchange program between Smolny College and Bard College in New York state by designating the private American liberal arts school an “undesirable” organization.

Jonathan Becker, Bard’s vice president for academic affairs and a professor of political studies, said the demise of Smolny was emblematic of a wider shift in Russia as well as a new intolerance of the West.

“A huge number of faculty have been let go, several departments closed, core liberal arts programs which focus on critical thinking have been eliminated,” Becker said. “All of that has happened, and it’s not just happened at Smolny — it has happened elsewhere. But we were doubly problematic because we both represent critical thinking and partnership with the West. And neither of those are acceptable in present-day Russia.”

In October 2022, in a scene captured on video and posted on social media, dozens of students gathered in a courtyard to bid a tearful goodbye to Skopin, Smolny’s cherished philosophy professor who was fired for an “immoral act” — protesting Putin’s announcement of a partial military mobilization to replenish his depleted forces in Ukraine.

The month before, according to court records and interviews, Skopin was arrested at an antiwar rally. He ended up sharing a jail cell with another professor, Artem Kalmykov, a young mathematician who had recently finished his PhD at the University of Zurich.

That fall, the university launched an overhaul that all but shut Smolny College and replaced the curriculum with a thoroughly revamped arts and humanities program.

The dismantling of Smolny marked the resolution of a years-long feud between Kudrin, the liberal-economist dean, and Nikolai Kropachev, the university rector, whom tutors and students described as a volatile character with a passion for building ties in the highest echelons of the government.

It’s hard to describe the insane level of anxiety the students felt at the start of the invasion, and I’d say 99 percent of them were against it.”

Denis Skopin

Former philosophy professor at Smolny College

It’s hard to describe the insane level of anxiety the students felt at the start of the invasion, and I’d say

99 percent of them were against it.”

It’s hard to describe the insane level

of anxiety the students felt at the start

of the invasion, and I’d say 99 percent

of them were against it.”

It’s hard to describe the insane level of anxiety

the students felt at the start of the invasion,

and I’d say 99 percent of them were against it.”

In February, Sergei Naryshkin, the head of Russia’s Foreign Intelligence Service, sent a heartfelt birthday message to Kropachev, thanking him for his “civic and political activity” and for “comprehensive assistance in replenishing personnel.”

One student described how Kropachev once interrupted a meeting with students and hinted that he needed to take a call from Putin, in what the student viewed as a boast of his direct access to the Russian leader. Both St. Petersburg State University and Moscow State University were assigned a special status in 2009, under which their rectors are appointed personally by the president.

Skopin, who earned his PhD in France, and his cellmate, Kalmykov, were perfect examples of the type of academic that Russia aspired to attract from the early 2000s to the mid-2010s — enticed after studying abroad to bring knowledge home amid booming investment in higher education. But by 2022, the system seemed to have no need for them.

Video of the gathering in the courtyard shows students erupting in sustained applause, and one student coming forward to hug Skopin.

“It’s hard to describe the insane level of anxiety the students felt at the start of the invasion, and I’d say 99 percent of them were against it,” Skopin said.

After his dismissal, some students tried to fight the administration’s plan to dismantle the Smolny program.

“At one point we found ourselves in a situation where out of 30 original faculty staff, we had just three tutors left,” said Polina Ulanovskaya, a sociology student and activist who led the student union. “And the quality of education definitely suffered, especially all of the politics-related classes.”

Ulanovskaya said that on the political science track, only two professors have stayed, and many classes were eliminated, including a human rights course. There are now just two courses offered in English, down from 21.

With every new professor, Ulanovskaya said, she felt a need to test the waters. Would the word “gender” trigger them? Could she say something opposition-leaning? What would be a red flag?

Ulanovskaya opted out of writing a thesis on her main research topic — Russian social movements, politicization of workers and historic-preservation activists — out of fear that it would be blacklisted. Instead, she wrote about Uruguay.

“The main problem at the faculty now is that there is no freedom and especially no sense of security,” she said. “I guess there is no such thing anywhere in Russia now ... you can’t trust anyone in any university.”

A few weeks after The Post interviewed Ulanovskaya last fall, she was expelled, formally for failing an exam, but she and Skopin said they believe it was retaliation for her activism.

Another student, Yelizaveta Antonova, was supposed to get her bachelor’s degree in journalism just days after legendary Novaya Gazeta newspaper reporter Yelena Milashina was brutally beaten in Chechnya, the small Muslim-majority republic in southern Russia under the dictatorial rule of Ramzan Kadyrov.

Antonova, who interned at Novaya Gazeta and looked up to Milashina, felt she could not accept her diploma without showing support for her colleague. She and a roommate printed a photo of Milashina, depicting the reporter’s shaved head and bandaged hands, to stage a demonstration at their graduation ceremony — much to the dismay of other classmates, who sought to block the protest.

“They essentially prevented us from going on stage,” Antonova said. “So we did it outside of the law school, and we felt it was extra symbolic because Putin and Medvedev studied in these halls.”

They held up the poster for about half an hour, until another student threatened them by saying riot police were on the way to arrest them. Antonova believes the protest cost her a spot in graduate school, where she hoped to continue her research comparing Russia’s media landscape before and after the invasion.

Eight months after the graduation ceremony, authorities launched a case against Antonova and her roommate for staging an unauthorized demonstration — an administrative offense that is punishable by a fine and puts people on law enforcement’s radar. Antonova left the country to continue her studies abroad.

Ideological divides

The history college at St. Petersburg State has long been a battleground for various ideologies, with cliques ranging from conservatives and Kremlin loyalists to unyielding opposition-minded liberals, according to interviews with students and professors.

The February 2022 invasion of Ukraine caused a deeper split. Some students and professors openly praised Putin’s “special military operation,” as the Kremlin called the war, while others joined rallies against it.

“The war gave them carte blanche,” said Michael Martin, 22, a former star at the college — to which he was automatically admitted after winning two nationwide academic competitions and where he earned straight A’s.

Martin was a leader of the student council, which on the day of the invasion issued an antiwar manifesto quickly drafted in a cafe.

Another history student, Fedor Solomonov, took the opposite view and praised the special military operation on social media. When Solomonov was called up as part of the mobilization, he declined to take a student deferral and went to fight. He died on the front on April 1, 2023.

Soon after Solomonov’s death, screenshots from internal chats where students often debated history and politics were leaked and went viral on pro-war Telegram channels. In some, Martin and other classmates expressed antiwar sentiments, while another showed a message — allegedly written by an assistant professor, Mikhail Belousov — vaguely describing events in Ukraine as “Rashism,” a wordplay combining “Russia” and “fascism.”

In an aggressive online campaign, pro-war activists demanded that Belousov, who denied writing the message, be fired and that the antiwar students, whom they labeled “a pro-Ukrainian organized crime group,” be expelled.

“A cell of anti-Russian students led by a Russophobe associate professor is operating at the history faculty,” read posts on Readovka, a radical outlet with 2.5 million followers. “They are rabid liberals who hate their country.” Belousov was dismissed and seven students, including Martin, were accused of desecrating Solomonov’s memory and expelled.

Belousov has gone underground and could not be reached for comment.

“They essentially tried to make me do the Sieg Heil,” Martin said, recalling the expulsion hearing, where he said the committee repeatedly asked leading questions trying to get him to say the war was justified. The committee also asked him repeatedly about Solomonov.

“I said he was for the war and I was against it — we could argue about that,” Martin said. “I didn’t find anything funny or interesting in this — I’m truly sorry for what happened to him, but at the same time, I don’t think that he did something good or great by going to war.”

Martin said that as the war raged on, the university began “glorifying death” and praising alumni who had joined the military.

This narrative also warped the curriculum.

A few weeks into the invasion, the school introduced a class on modern Ukrainian history, with a course description asserting that Ukrainian statehood is based “on a certain mythology.”

They essentially tried to make me do the Sieg Heil.”

Michael Martin

Former student at St. Petersburg State University

Belousov, the former assistant professor, criticized a course titled “The Great Patriotic War: No Statute of Limitations,” taught by an instructor with a degree in library science. The key message of the course is that the Soviet Union had no role in the start of World War II — a denial of Russia’s joint invasion of Poland with Nazi Germany in 1939.

According to a government document reviewed by The Post, Russia’s Higher Education Ministry plans to introduce this course at other universities to ensure the “civic-patriotic and spiritual-moral education of youth,” specifically future lawyers, teachers and historians, and to “correct false ideas.”

“These are obviously propaganda courses that are aimed at turning historians into court apologists,” Martin said.

Martin was expelled days before he was supposed to defend his thesis. He quickly left the country after warnings that he and his classmates could be charged with discrediting the army, a crime punishable by up to 15 years in prison. A criminal case was initiated against Belousov on charges of rehabilitating Nazism.

“This is all very reminiscent of the Stalinist 1930s purges,” Martin said. “The limit of tolerated protest now is to sit silently and say nothing. There is despair at the faculty and a feeling that they have crushed everything.”

New Russian elite

To lure more Russian men to fight in Ukraine, the government has promised their families various sweeteners, including cheap mortgages, large life insurance payments and education benefits for their children.

In 2022, Putin approved changes to education laws to grant children of soldiers who fought in Ukraine admissions preferences at Russia’s best universities — schools that normally accept only students with near-perfect exam scores and impressive high school records.

Now, at least 10 percent of all fully funded university spots must be allocated to students eligible for the military preference. Those whose fathers were killed or wounded do not need to pass entry exams.

The new law solidified a previous Putin decree that gave special preferences to soldiers and their children. In the 2023-24 academic year, about 8,500 students were enrolled based on these preferences, government officials said. According to an investigation by the Russian-language outlet Important Stories, nearly 900 students were admitted to 13 top universities through war quotas, with most failing to meet the normal exam score threshold.

In areas of Ukraine captured by Russian forces since February 2022, a different takeover of the education system is underway, with Moscow imposing its curriculum and standards just as it did after invading and illegally annexing Crimea in 2014.

For the 2023-24 academic year, according to the Russian prime minister’s office, more than 5 percent of fully state-financed tuition stipends — roughly 37,000 out of 626,000 — were allocated for students at universities in Donetsk, Luhansk, Kherson or Zaporizhzhia, the four occupied or partly occupied areas of Ukraine that Putin has claimed to be annexed.

The relatively large allocation of tuition aid in occupied areas shows how financial assistance and education are central to Putin’s effort to seize lands in southeast Ukraine and absorb its population into Russia in violation of international law.

Deans of several leading Russian universities have made highly publicized trips to occupied Ukraine to urge students there to enroll into Russian schools, part of a multipronged effort to bring residents into Moscow’s orbit.

The Moscow-based Higher School of Economics, once considered Russia’s most liberal university, recently established patronage over universities in Luhansk, with Rector Nikita Anisimov often traveling there.

An inward turn

A few weeks after the invasion started, Moscow abandoned the Bologna Process , a pan-European effort to align higher education standards, as Russia’s deans and rectors strove to show they weren’t susceptible to foreign influence.

Higher Education Minister Valery Falkov said Russian universities would undergo significant changes in the next half-decade, overseen by the national program “Priority 2030,” which envisions curriculums that ensure “formation of a patriotic worldview in young people.”

Soon after Russia quit the Bologna Process, Smolny College was targeted for overhaul.

“The decision was an expected but distinct shift from the more liberal model of Russian higher education policy that emerged after the collapse of the Soviet Union,” said Victoria Pardini, a program associate at the Kennan Institute, a Washington think tank focused on Russia.

Another prestigious school, the Russian Presidential Academy of National Economy and Public Administration, canceled its liberal arts program in 2022 after authorities accused it of “destroying national values.”

In mid-October 2023, the Higher Education Ministry ordered universities to avoid open discussion of “negative political, economic and social trends,” according to a publicly disclosed report by British intelligence. “In the longer term, this will likely further the trend of Russian policymaking taking place in an echo-chamber,” the report concluded.

Russia’s position among

countries by number of

scholarly papers published

Source: Institute for Statistical Studies and Economics

of Knowledge

Russia’s position among countries by

number of scholarly papers published

Source: Institute for Statistical Studies and Economics of Knowledge

Russia’s position among countries by number of

Many international exchange programs have been canceled — some because Russian students now have difficulty obtaining visas. Still, a heavy brain drain is underway. “All those who could — they left the country,” Skopin said of his students. “Those who can’t are thrashing around as if they are in a cage.”

Martin is among those who got out — he was recently accepted into a prestigious master’s program abroad and plans to continue his research into 19th-century Australian federalism.

Skopin now teaches in Berlin and is a member of Smolny Beyond Borders, an education program that seeks funding to cover the tuition of students who leave Russia because of their political views. As of late 2023, an estimated 700 students were enrolled.